A new ZVS DC/DC converter with fully regulated dual outputs

A new type of dual output zero voltage switched (ZVS) DC/DC power converter is proposed. One output is dependent on the effective duty ratio and the other is largely dependent on the switching frequency. Two completely regulated outputs are obtained with only one bridge circuit by combining the different configurations of secondary output. Using ZVS technique, switching loss can be reduced to quite low at several hundred kHz.<<ETX>>

[1]  F. Lee,et al.  Zero-voltage switching technique in DC/DC converters , 1986, 1986 17th Annual IEEE Power Electronics Specialists Conference.

[2]  Il-Song Kim,et al.  A soft switching constant frequency PWM DC/DC converter with low switch stress and wide linearity , 1990, [Proceedings] IECON '90: 16th Annual Conference of IEEE Industrial Electronics Society.

[3]  F. Lee,et al.  Zero-voltage switching technique in DC/DC converters , 1986 .

[4]  Javier Sebastian,et al.  The Double Converter: A Fully Regulated Two-Output DC-DC Converter , 1987, IEEE Transactions on Power Electronics.

[5]  F.C. Lee,et al.  Design considerations for high-voltage high-power full-bridge zero-voltage-switched PWM converter , 1990, Fifth Annual Proceedings on Applied Power Electronics Conference and Exposition.

[6]  C. Henze,et al.  Zero-voltage switching in high frequency power converters using pulse width modulation , 1988, APEC '88 Third Annual IEEE Applied Power Electronics Conference and Exposition.

[7]  O. D. Patterson,et al.  Pseudo-resonant full bridge DC/DC converter , 1987, IEEE Power Electronics Specialists Conference.

[8]  J. Uceda,et al.  The double converter: A fully regulated two-output dc-to-dc converter , 1985, 1985 IEEE Power Electronics Specialists Conference.

[9]  Michael J. Devaney,et al.  Single switch dual output DC-DC converter , 1988, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference.