Portland cement paste with aligned carbon fibers exhibiting exceptionally high flexural strength (> 100 MPa)

Abstract Here, we introduce a nozzle injection technique for carbon fiber-reinforced cement paste leading to unidirectional alignment of cement-embedded short carbon fibers that follow the movement direction of the guided nozzle. In comparison to non-reinforced cement pastes, this novel material exhibits a tremendous increase of its flexural strength upon admixing and aligning 1 to 3 percent (by volume) of chopped carbon fibers. Cement pastes containing carbon fibers aligned in the stress direction thus acquire high compressive and flexural strength values at the same time. Mechanical tests prove the material to withstand flexural loads larger than 100 MPa in conjunction with a deflection hardening behavior resembling that of high performance fiber-reinforced cementious composites at relatively low fiber volume content. Insights into the preparation, fiber alignment, rheology and the fracture behavior of this material are presented in this study.

[1]  Tahar El-Korchi,et al.  Strength and reliability of carbon-fiber-reinforced cement composites , 1994 .

[2]  V. Li,et al.  Bond properties of carbon fibers in cementitious matrix , 1995 .

[3]  D.D.L. Chung,et al.  Carbon fiber composites , 1994 .

[4]  Viktor Mechtcherine,et al.  Mechanical behaviour of strain hardening cement-based composites under impact loading , 2011 .

[5]  H. Toutanji,et al.  Behaviour of carbon fiber reinforced cement composites in direct tension , 1993 .

[6]  V. Mechtcherine,et al.  Behaviour of Strain-hardening Cement-based Composites (SHCC) under monotonic and cyclic tensile loading: Part 2 – Modelling , 2010 .

[7]  Surendra P. Shah,et al.  Microstructure of extruded cement-bonded fiberboard , 2001 .

[8]  Burtrand I. Lee,et al.  Experimental study on the engineering properties of carbon fiber reinforced cement composites , 1991 .

[9]  Barzin Mobasher,et al.  MICROCRACKING IN FIBER REINFORCED CONCRETE , 1990 .

[10]  R. F. Zollo.  Fiber-reinforced concrete: An overview after 30 years of development , 1997 .

[11]  A. Bandyopadhyay,et al.  Bone tissue engineering using 3D printing , 2013 .

[12]  Peter Morgan,et al.  Carbon Fibers and Their Composites , 2005 .

[13]  D.D.L. Chung,et al.  Ozone treatment of carbon fiber for reinforcing cement , 1998 .

[14]  T. T. Le,et al.  Mix design and fresh properties for high-performance printing concrete , 2012 .

[15]  A. Gibb,et al.  Hardened properties of high-performance printing concrete , 2012 .

[16]  Surendra P. Shah,et al.  MECHANICAL PROPERTIES OF PVA FIBER REINFORCED CEMENT COMPOSITES FABRICATED BY EXTRUSION PROCESSING , 1997 .

[17]  Antoine E. Naaman,et al.  Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing , 2012 .

[18]  D. Chung,et al.  Improving the bond strength between carbon fiber and cement by fiber surface treatment and polymer addition to cement mix , 1996 .

[19]  A. Briggs,et al.  Carbon fibre-reinforced cement , 1977 .

[20]  P. Rossi,et al.  Tensile and bending behaviour of a strain hardening cement-based composite: Experimental and numerical analysis , 2012 .

[21]  Chunxiang Qian,et al.  Development of hybrid polypropylene-steel fibre-reinforced concrete , 2000 .

[22]  P. Stroeven,et al.  The analysis of fibre distributions in fibre reinforced materials * , 1977 .

[23]  Hwai Chung Wu,et al.  Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites , 1995 .

[24]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[25]  N. Banthia,et al.  Micro-Reinforced Cementitious Materials , 1990 .

[26]  C. Shi,et al.  High-Performance Construction Materials: Science and Applications , 2008 .

[27]  D. Chung,et al.  Improving the tensile properties of carbon fiber reinforced cement by ozone treatment of the fiber , 1996 .

[28]  Gabriel Villar,et al.  A Tissue-Like Printed Material , 2013, Science.

[29]  Mohamed Maalej,et al.  Toughening in cement based composites. Part I: Cement, mortar, and concrete , 1996 .

[30]  Mohamed Maalej,et al.  Toughening in cement based composites. Part II: Fiber reinforced cementitious composites , 1996 .

[31]  Viktor Mechtcherine,et al.  Behaviour of Strain-hardening Cement-based Composites (SHCC) under monotonic and cyclic tensile loading Part 1 - Experimental investigations , 2010 .

[32]  V. Li,et al.  Design and structural applications of stress-crack width relations in fibre reinforced concrete , 1995 .

[33]  D. Chung,et al.  Carbon fiber reinforced cement composites improved by using chemical agents , 1989 .

[34]  Jürgen Groll,et al.  Fiber reinforcement during 3D printing , 2015 .

[35]  A. M. Brandt,et al.  Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering , 2008 .

[36]  Victor C. Li,et al.  A design approach for the mechanical properties of polypropylene discontinuous fiber reinforced cementitious composites by extrusion molding , 2003 .

[37]  Glaucio H. Paulino,et al.  Functionally-graded fiber-reinforced cement composite: Processing, microstructure, and properties , 2008 .

[38]  Antoine E. Naaman,et al.  Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading , 2014 .

[39]  Surendra P. Shah,et al.  Extruded Fiber-Reinforced Composites , 1995 .

[40]  Surendra P. Shah,et al.  Processing of high-performance fiber-reinforced cement-based composites , 2010 .

[41]  Xiangming Zhou,et al.  Fiber alignment and property direction dependency of FRC extrudate , 2003 .

[42]  Surendra P. Shah,et al.  Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock and Other Quasi-Brittle Materials , 1995 .

[43]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[44]  T.-J. Kim,et al.  Flexural and tensile strength developments of various shape carbon fiber-reinforced lightweight cementitious composites , 1998 .

[45]  L. E. Kukacka,et al.  Interfacial reactions between oxidized carbon fibers and cements , 1989 .

[46]  S. Akihama,et al.  Mechanical properties of carbon fibre reinforced cement composites , 1986 .

[47]  Victor C. Li,et al.  Effects of transition zone densification on fiber/cement paste bond strength improvement , 1997 .

[48]  Hirozo Mihashi,et al.  Multiple cracking and strain hardening in fiber-reinforced concrete under uniaxial tension , 2009 .