Energy and sizing analyses of parabolic trough solar collector integrated with steam and binary vapor cycles

In this study, solar field sizing and overall performance of different vapor cycles are examined. The systems considered are parabolic trough solar collectors integrated with either a binary vapor cycle or a steam Rankine cycle (SRC). The binary vapor cycle consists of an SRC as a topping cycle and an organic Rankine cycle as a bottoming cycle. Seven refrigerants are examined for the bottoming cycle: R600, R600a, R134a, R152a, R290, R407c, and ammonia. This study reveals that significant reduction in the solar field size is gained due to the performance improvement when the binary vapor cycle is considered as compared to a steam Rankine cycle with atmospheric condensing pressure; however, SRC with vacuum pressure has the best performance and smallest solar field size. It further reveals that the R134a binary vapor cycle has the best performance among the binary vapor cycles considered and, thus, requires the smallest solar field size while the R600a binary vapor cycle has the lowest performance. Finally, optimization shows that lowering the mass flow rate of the heat transfer fluid (HTF) per each solar collector row, within the range considered, results in a reduction of the required number of solar collector rows and, thus, in savings.

[1]  Yiping Dai,et al.  Thermodynamic analysis and optimization of an (organic Rankine cycle) ORC using low grade heat source , 2013 .

[2]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[3]  Peter A. Jacobs,et al.  Dynamic characteristics of a direct-heated supercritical carbon-dioxide Brayton cycle in a solar thermal power plant , 2013 .

[4]  Bertrand F. Tchanche,et al.  Fluid selection for a low-temperature solar organic Rankine cycle , 2009 .

[5]  M. J. Montes,et al.  Performance of a direct steam generation solar thermal power plant for electricity production as a function of the solar multiple , 2009 .

[6]  Yiping Dai,et al.  Thermodynamic analysis and optimization of a solar-driven regenerative organic Rankine cycle (ORC) based on flat-plate solar collectors , 2013 .

[7]  Eckhard Lüpfert,et al.  Advances in Parabolic Trough Solar Power Technology , 2002 .

[8]  Chi-Chuan Wang,et al.  Transient response of a 50 kW organic Rankine cycle system , 2012 .

[9]  María José Montes,et al.  Performance analysis of an Integrated Solar Combined Cycle using Direct Steam Generation in parabolic trough collectors , 2011 .

[10]  Mahmood Yaghoubi,et al.  Transient simulation for developing a combined solar thermal power plant , 2012 .

[11]  Ashok Misra,et al.  Parametric optimization and performance analysis of a regenerative Organic Rankine Cycle using R-123 for waste heat recovery , 2012 .

[12]  E. Zarza,et al.  INDITEP: The first pre-commercial DSG solar power plant , 2006 .

[13]  E. Camacho,et al.  Control concepts for direct steam generation in parabolic troughs , 2005 .

[14]  M. J. Moran,et al.  Thermal design and optimization , 1995 .

[15]  S. Kalogirou Solar Energy Engineering: Processes and Systems , 2009 .

[16]  Jie Ji,et al.  Energetic and exergetic investigation of an organic Rankine cycle at different heat source temperatures , 2012 .

[17]  Yongping Yang,et al.  An efficient way to use medium-or-low temperature solar heat for power generation – integration into conventional power plant , 2011 .