Optimal assignment of 4D close-loop instructions to enable CDOs in dense TMAs

Continuous descent operations (CDOs) with required times of arrival (RTAs) represent a potential solution to reduce the environmental impact in terminal maneuvering areas without degrading capacity. However, flight management systems require to know the remaining distance to the metering fix in order to compute the CDO complying with the CTA. This paper assesses the feasibility of replacing the current air traffic control sequencing and merging techniques, which are mainly based on open-loop vectoring, by a control based on RTAs over known and pre-defined arrival routes (i.e., with known distances to go). An optimal control problem has been formulated and solved in order to generate CDO trajectories, while a mixed-integer-linear programming model was build in order to solve the aircraft landing problem in the metering fix. The assessment has been performed for Berlin-Schonefeld airport (Germany), by using arrival traffic gathered from historical data and by taking advantage of its tromboning procedure. Furthermore, a second scenario was studied by adding more simulated traffic to the existing one. Results show that, after assigning an RTA and a route to every arriving aircraft, a time separation of 120 is ensured in the metering fix, while at least 90 seconds of separation are maintained in the the rest of waypoints of the procedure.

[1]  Louis Erkelens.  Research into new noise abatement procedures for the 21st century , 2000 .

[2]  Chris Shaw,et al.  Models of Air Traffic Merging Techniques: Evaluating Performance of Point Merge , 2009 .

[3]  M. M. van Paassen,et al.  Time and Energy Management During Approach: A Human-in-the-Loop Study , 2017 .

[4]  Max Mulder,et al.  Wind-Profile Estimation Using Airborne Sensors , 2014 .

[5]  C. D. Boor,et al.  On Calculating B-splines , 1972 .

[6]  Bruce A. McCarl,et al.  APPLIED MATHEMATICAL PROGRAMMING USING ALGEBRAIC SYSTEMS by , 1997 .

[7]  George M. Siouris,et al.  Applied Optimal Control: Optimization, Estimation, and Control , 1979, IEEE Transactions on Systems, Man, and Cybernetics.

[8]  Eric Hoffman,et al.  MERGING ARRIVAL FLOWS WITHOUT HEADING INSTRUCTIONS , 2007 .

[9]  Hartmut Fricke,et al.  Fuel and Energy Benchmark Analysis of Continuous Descent Operations , 2015 .

[10]  Padmanabhan Menon,et al.  Optimal Trajectory Option Sets for In-Flight Climb-Descend Trajectory Negotiations , 2017 .

[11]  Anthony W. Warren,et al.  Development of continuous descent approach concepts for noise abatement [ATC] , 2002, Proceedings. The 21st Digital Avionics Systems Conference.

[12]  Ana Del Amo,et al.  Controlled Time-of-Arrival Flight Trials Results and Analysis , 2009 .

[13]  Piotr Lichota,et al.  Arrival traffic synchronisation with Required Time of Arrivals for fuel-efficient trajectories , 2017 .

[14]  John-Paul Clarke,et al.  Continuous Descent Approach: Design and Flight Test for Louisville International Airport , 2004 .

[15]  Ramon Dalmau,et al.  4D continuous descent operations supported by an electronic flight bag: A human-in-the-loop study , 2016, 2016 IEEE/AIAA 35th Digital Avionics Systems Conference (DASC).

[16]  Ramon Dalmau Codina,et al.  Combining the assignment of pre-defined routes and RTAs to sequence and merge arrival traffic , 2017 .

[17]  Vincent Mouillet,et al.  Advanced aircraft performance modeling for ATM: Analysis of BADA model capabilities , 2010, 29th Digital Avionics Systems Conference.