Experimental investigation on microchannel condensers with and without liquid–vapor separation headers

Abstract To enhance heat transfer in microchannels during condensation by improving the refrigerant average quality, a new liquid–vapor separation microchannel condenser (LSMC) is presented in this paper. Compared with the common parallel flow microchannel condenser (PFMC), the LSMC has a pair of headers that can drain away the condensate after each pass. The in-tube heat transfer coefficient and pressure drop of the two kinds of microchannel condensers with similar heat transfer areas are compared under mass fluxes that range from 450 kg/(m 2 s) to 770 kg/(m 2 s), heat fluxes that range from 1.5 kW/m 2 to 2.45 kW/m 2 , and condensing temperatures that range from 45 °C to 50 °C. Results show that the average heat transfer coefficient (AHTC) of the LSMC exceeds that of the PFMC when the mass flux is more than 590 kg/(m 2 s) or the average quality is more than 0.57. The pressure drop of the LSMC greatly reduces by 30.5%–52.6% of the PFMC. The combined thermodynamic performance of the LSMC is better than that of the PFMC based on the ranking through the penalty factor and minimum entropy generation number.

[1]  Davide Del Col,et al.  Experimental investigation on condensation heat transfer and pressure drop of new HFC refrigerants (R134a, R125, R32, R410A, R236ea) in a horizontal smooth tube , 2001 .

[2]  Somchai Wongwises,et al.  Optimal configuration of cross flow plate finned tube condenser based on the second law of thermodynamics. , 2008 .

[3]  W. Payne.  Void Fraction and Pressure Drop in Microchannels , 2000 .

[4]  O. Mahian,et al.  Condensation heat transfer characteristics of R-134a flowing inside the multiport minichannels , 2013 .

[5]  Ying Chen,et al.  Prediction and verification of the thermodynamic performance of vapor–liquid separation condenser , 2013 .

[6]  Armin Hafner,et al.  Development of compact heat exchangers for CO2 air-conditioning systems☆ , 1998 .

[7]  Xianglong Luo,et al.  In-tube performance evaluation of an air-cooled condenser with liquid–vapor separator , 2014 .

[8]  S. N. Sapali,et al.  Condensation pressure drop of HFC-134a and R-404A in a smooth and micro-fin U-tube , 2011 .

[9]  R. Webb,et al.  Condensation of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins , 1996 .

[10]  C. Son,et al.  Condensation pressure drop of R22, R134a and R410A in a single circular microtube , 2012 .

[11]  Klas Andersson,et al.  Mini-Channel Aluminium Heat Exchangers with Small Inside Volumes , 2003 .

[12]  W. Wang.  Condensation and single-phase heat transfer coefficient and flow regime visualization in microchannel tubes for HFC-134A / , 1999 .

[13]  Davide Del Col,et al.  Condensation inside and outside smooth and enhanced tubes: a review of recent research , 2003 .

[14]  A. Cavallini,et al.  Experimental Investigation on Condensation Heat Transfer Coefficient Inside Multi-Port Minichannels , 2003 .

[15]  Shigeru Koyama,et al.  An experimental study on condensation of refrigerant R134a in a multi-port extruded tube , 2003 .

[16]  David F. Fletcher,et al.  Local condensation heat transfer rates in fine passages , 2003 .

[17]  Predrag Stojan Hrnjak,et al.  Experimental and numerical study on microchannel and round-tube condensers in a R410A residential air-conditioning system , 2008 .

[18]  Steven J. Eckels,et al.  An experimental comparison of evaporation and condensation heat transfer coefficients for HFC-134a and CFC-12 , 1991 .

[19]  Davide Del Col,et al.  Experimental study on condensation heat transfer inside a single circular minichannel , 2009 .

[20]  S. Wongwises,et al.  Pressure drop during condensation of R134a flowing inside a multiport minichannel , 2014 .