Rapid Mix Preparation of Bioinspired Nanoscale Hydroxyapatite for Biomedical Applications

Hydroxyapatite (HA) has been widely used as a medical ceramic due to its good biocompatibility and osteoconductivity. Recently there has been interest regarding the use of bioinspired nanoscale hydroxyapatite (nHA). However, biological apatite is known to be calcium-deficient and carbonate-substituted with a nanoscale platelet-like morphology. Bioinspired nHA has the potential to stimulate optimal bone tissue regeneration due to its similarity to bone and tooth enamel mineral. Many of the methods currently used to fabricate nHA both in the laboratory and commercially, involve lengthy processes and complex equipment. Therefore, the aim of this study was to develop a rapid and reliable method to prepare high quality bioinspired nHA. The rapid mixing method developed was based upon an acid-base reaction involving calcium hydroxide and phosphoric acid. Briefly, a phosphoric acid solution was poured into a calcium hydroxide solution followed by stirring, washing and drying stages. Part of the batch was sintered at 1,000 °C for 2 h in order to investigate the products' high temperature stability. X-ray diffraction analysis showed the successful formation of HA, which showed thermal decomposition to β-tricalcium phosphate after high temperature processing, which is typical for calcium-deficient HA. Fourier transform infrared spectroscopy showed the presence of carbonate groups in the precipitated product. The nHA particles had a low aspect ratio with approximate dimensions of 50 x 30 nm, close to the dimensions of biological apatite. The material was also calcium deficient with a Ca:P molar ratio of 1.63, which like biological apatite is lower than the stoichiometric HA ratio of 1.67. This new method is therefore a reliable and far more convenient process for the manufacture of bioinspired nHA, overcoming the need for lengthy titrations and complex equipment. The resulting bioinspired HA product is suitable for use in a wide variety of medical and consumer health applications.

[1]  P. Hatton,et al.  Preparation and Antibacterial Properties of Silver-Doped Nanoscale Hydroxyapatite Pastes for Bone Repair and Augmentation. , 2017, Journal of biomedical nanotechnology.

[2]  C. Wilcock.  The development of nanostructured calcium phosphate biomaterials for bone tissue regeneration , 2015 .

[3]  P. Gentile,et al.  Process Optimisation to Control the Physico-Chemical Characteristics of Biomimetic Nanoscale Hydroxyapatites Prepared Using Wet Chemical Precipitation , 2015, Materials.

[4]  L. Grover,et al.  Preparation and characterisation of nanophase Sr, Mg, and Zn substituted hydroxyapatite by aqueous precipitation. , 2014, Materials science & engineering. C, Materials for biological applications.

[5]  E. Brès,et al.  XRD and FTIR crystallinity indices in sound human tooth enamel and synthetic hydroxyapatite. , 2013, Materials science & engineering. C, Materials for biological applications.

[6]  P. Zhu,et al.  Biomimetic synthesis and biocompatibility evaluation of carbonated apatites template-mediated by heparin. , 2013, Materials science & engineering. C, Materials for biological applications.

[7]  R. Rawat,et al.  Effect of surfactant and heat treatment on morphology, surface area and crystallinity in hydroxyapatite nanocrystals , 2013 .

[8]  P. Tran,et al.  Recent advances in research applications of nanophase hydroxyapatite. , 2012, Chemphyschem : a European journal of chemical physics and physical chemistry.

[9]  F. Guillemot,et al.  Physico-chemical and biological properties of a nano-hydroxyapatite powder synthesized at room temperature , 2010 .

[10]  M. Gazzano,et al.  Ionic substitutions in calcium phosphates synthesized at low temperature. , 2010, Acta biomaterialia.

[11]  M. Yoshimura,et al.  An Effective Morphology Control of Hydroxyapatite Crystals via Hydrothermal Synthesis , 2009 .

[12]  T. Webster,et al.  An in vitro evaluation of the Ca/P ratio for the cytocompatibility of nano-to-micron particulate calcium phosphates for bone regeneration. , 2008, Acta biomaterialia.

[13]  J. Pasteris,et al.  Bone and Tooth Mineralization: Why Apatite? , 2008 .

[14]  A. Boskey,et al.  Mineralization of Bones and Teeth , 2007 .

[15]  R. Tang,et al.  Role of hydroxyapatite nanoparticle size in bone cell proliferation , 2007 .

[16]  M. Lombardi,et al.  Thermal stability and sintering behaviour of hydroxyapatite nanopowders , 2007 .

[17]  K. Khor,et al.  Apparent solubility of hydroxyapatite in aqueous medium and its influence on the morphology of nanocrystallites with precipitation temperature. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[18]  J. Pasteris,et al.  A mineralogical perspective on the apatite in bone , 2005 .

[19]  W. Feng,et al.  A simple sol–gel technique for preparing hydroxyapatite nanopowders , 2005 .

[20]  E. Landi,et al.  From biomimetic apatites to biologically inspired composites , 2005, Analytical and bioanalytical chemistry.

[21]  T. Kumar,et al.  Microwave accelerated synthesis of nanosized calcium deficient hydroxyapatite , 2004, Journal of materials science. Materials in medicine.

[22]  K. Khor,et al.  Temperature driven morphological changes of chemically precipitated hydroxyapatite nanoparticles. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[23]  P. Hatton,et al.  The ultrastructure of slam-frozen bone mineral , 1997, The Histochemical Journal.

[24]  S. Koutsopoulos,et al.  Synthesis and characterization of hydroxyapatite crystals: a review study on the analytical methods. , 2002, Journal of biomedical materials research.

[25]  W. Bonfield,et al.  Novel synthesis and characterization of an AB-type carbonate-substituted hydroxyapatite. , 2002, Journal of biomedical materials research.

[26]  M. Boulos,et al.  Morphological study of hydroxyapatite nanocrystal suspension , 2000, Journal of materials science. Materials in medicine.

[27]  I. Rehman,et al.  Characterization of the transformation from calcium-deficient apatite to β-tricalcium phosphate , 2000, Journal of materials science. Materials in medicine.

[28]  J. J. PRIETO VALDE,et al.  Fibrous growth of tricalcium phosphate ceramics , 1997, Journal of materials science. Materials in medicine.

[29]  T. Nieh,et al.  Synthesis of ultrafine hydroxyapatite particles by a spray dry method , 1995 .

[30]  L. Yubao,et al.  Shape change and phase transition of needle-like non-stoichiometric apatite crystals , 1994 .

[31]  J. Elliott,et al.  Structure and chemistry of the apatites and other calcium orthophosphates , 1994 .