A robust high refractive index sensitivity fiber Mach–Zehnder interferometer fabricated by femtosecond laser machining and chemical etching

Abstract A fiberized refractive index (RI) Mach–Zehnder interferometer (MZI) based on a micro V-shaped slot in fiber core is fabricated in a standard single mode optical fiber by femtosecond laser machining and chemical etching. The interference fringe of the MZI would shift with the variation of the ambient RI. The experimental results show that the RI sensitivity for the sensor is about −104 nm/RIU (refractive index unit) within the RI range between 1.332 and 1.352. Its robust structure and high sensitivity will have attractive potential application in chemical, biological and environmental monitoring.

[1]  Sumei Wang,et al.  A High-Quality Mach-Zehnder Interferometer Fiber Sensor by Femtosecond Laser One-Step Processing , 2010, Sensors.

[2]  Han Chunyang,et al.  Temperature insensitive refractive index sensor based on single-mode micro-fiber Sagnac loop interferometer , 2014 .

[3]  H. Tsai,et al.  High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing. , 2011, Applied optics.

[4]  Reginald K. Lee,et al.  Highly sensitive fiber Bragg grating refractive index sensors , 2005 .

[5]  Andrey Andreev,et al.  Single-mode fiber polished into the core as a sensor element , 1998 .

[6]  Guanxiu Liu,et al.  D-Shaped Plastic Optical Fiber Sensor for Testing Refractive Index , 2014, IEEE Sensors Journal.

[7]  Zhaobing Tian,et al.  In-Line Single-Mode Optical Fiber Interferometric Refractive Index Sensors , 2009, Journal of Lightwave Technology.

[8]  Sumei Wang,et al.  Femtosecond laser fabricated all-optical fiber sensors with ultrahigh refractive index sensitivity: modeling and experiment. , 2011, Optics express.

[9]  K. Sooley,et al.  Tapered fiber Mach–Zehnder interferometer for simultaneous measurement of refractive index and temperature , 2009 .

[10]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[11]  Guolu Yin,et al.  Refractive index sensor with asymmetrical fiber Mach–Zehnder interferometer based on concatenating single-mode abrupt taper and core-offset section , 2013 .

[12]  Ying Wang,et al.  Refractive index sensor based on a microhole in single-mode fiber created by the use of femtosecond laser micromachining. , 2009, Optics letters.

[13]  Jose Luis Santos,et al.  Enhanced refractive index sensing characteristics of optical fibre long period grating coated with titanium dioxide thin films , 2014 .

[14]  Miguel V. Andrés,et al.  A Refractive Index Sensor Based on the Resonant Coupling to Cladding Modes in a Fiber Loop , 2013, Sensors.

[15]  P. Lu,et al.  Fiber in-line Mach-Zehnder interferometer fabricated by femtosecond laser micromachining for refractive index measurement with high sensitivity , 2010 .

[16]  C. Liao,et al.  Optical fiber Fabry-Perot interferometer cavity fabricated by femtosecond laser micromachining and fusion splicing for refractive index sensing. , 2012, Optics express.

[17]  Tao Wei,et al.  Temperature-insensitive miniaturized fiber inline Fabry-Perot interferometer for highly sensitive refractive index measurement. , 2008, Optics express.

[18]  Jian-Neng Wang,et al.  Photonic Crystal Fiber Mach-Zehnder Interferometer for Refractive Index Sensing , 2012, Sensors.

[19]  Yong Zhao,et al.  Investigation of the high sensitivity RI sensor based on SMS fiber structure , 2014 .