Characterization of dose-dependent Young's modulus for a radiation-sensitive polymer gel

Radiation-sensitive polymer gels for clinical dosimetry have been intensively investigated with magnetic resonance imaging (MRI) because the transversal magnetic relaxation time is dependent on irradiation dose. MRI is expensive and not easily available in most clinics. For this reason, low-cost, quick and easy-to-use potential alternatives such as optical computed tomography (CT), x-ray CT or ultrasound attenuation CT have also been studied by others. Here, we instead evaluate the dose dependence of the elastic material property, Young's modulus and the dose response of the viscous relaxation of radiation-sensitive gels to discuss their potential for dose imaging. Three batches of a radiation-sensitive polymer gel (MAGIC gel) samples were homogeneously irradiated to doses from 0 Gy to 45.5 Gy. Young's modulus was computed from the measured stress on the sample surface and the strain applied to the sample when compressing it axially, and the viscous relaxation was determined from the stress decay under sustained compression. The viscous relaxation was found not to change significantly with dose. However, Young's modulus was dose dependent; it approximately doubled in the gels between 0 Gy and 20 Gy. By fitting a second-order polynomial to the Young's modulus-versus-dose data, 99.4% of the variance in Young's modulus was shown to be associated with the change in dose. The precision of the gel production, irradiation and Young's modulus measurement combined was found to be 4% at 2 Gy and 3% at 20 Gy. Potential sources of measurement error, such as those associated with the boundary conditions in the compression measurement, inhomogeneous polymerization, temperature (up to 1% error) and the evaporation of water from the sample (up to 1% error), were estimated and discussed. It was concluded that Young's modulus could be used for dose determination. Imaging techniques such as elastography may help to achieve this if they can provide a local measurement of Young's modulus, which may eliminate problems associated with the boundaries (e.g. variation in coefficient of friction) and inhomogeneous polymerization. Elastography combined with a calibration should also be capable of mapping dose in three dimensions.

[1]  A. Jirasek,et al.  Polymer gel dosimetry using x-ray computed tomography: a feasibility study. , 2000, Physics in medicine and biology.

[2]  M. Doyley,et al.  Evaluation of an iterative reconstruction method for quantitative elastography , 2000 .

[3]  C De Wagter,et al.  The fundamental radiation properties of normoxic polymer gel dosimeters: a comparison between a methacrylic acid based gel and acrylamide based gels , 2006, Physics in medicine and biology.

[4]  J. Bamber,et al.  Ultrasound elasticity imaging: definition and technology , 1999, European Radiology.

[5]  J. Creed,et al.  An investigation of the chemical stability of arsenosugars in simulated gastric juice and acidic environments using IC-ICP-MS and IC-ESI-MS/MS. , 2002, The Analyst.

[6]  J. Hogg.  Magnetic resonance imaging. , 1994, Journal of the Royal Naval Medical Service.

[7]  Jacqueline A Shipley,et al.  Elastography for breast cancer diagnosis using radiation force: system development and performance evaluation. , 2006, Ultrasound in medicine & biology.

[8]  J. Ophir,et al.  Elastography: A Quantitative Method for Imaging the Elasticity of Biological Tissues , 1991, Ultrasonic imaging.

[9]  M. Fink,et al.  Shear modulus imaging with 2-D transient elastography , 2002, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  Characterization of the ultrasonic attenuation coefficient and its frequency dependence in a polymer gel dosimeter. , 2007, Physics in medicine and biology.

[11]  Clive Baldock,et al.  Ultrasound tomography imaging of radiation dose distributions in polymer gel dosimeters: preliminary study. , 2003, Medical physics.

[12]  C. Baldock,et al.  Modelling of post-irradiation events in polymer gel dosimeters. , 2001, Physics in medicine and biology.

[13]  C Baldock,et al.  Experimental procedure for the manufacture and calibration of polyacrylamide gel (PAG) for magnetic resonance imaging (MRI) radiation dosimetry. , 1998, Physics in medicine and biology.

[14]  Assad A. Oberai,et al.  INVERSE PROBLEMS PII: S0266-5611(03)54272-1 Solution of inverse problems in elasticity imaging using the adjoint method , 2003 .

[15]  J. Gore,et al.  Radiation dose distributions in three dimensions from tomographic optical density scanning of polymer gels: II. Optical properties of the BANG polymer gel. , 1996, Physics in medicine and biology.

[16]  Mark Palmeri,et al.  Analysis of contrast in images generated with transient acoustic radiation force. , 2006, Ultrasound in medicine & biology.

[17]  Polymer gel dosimetry using x-ray computed tomography: investigation of the effect of reconstruction technique , 2010 .

[18]  S Webb,et al.  Improving calibration accuracy in gel dosimetry. , 1998, Physics in medicine and biology.

[19]  S. Timoshenko,et al.  Theory of Elasticity (3rd ed.) , 1970 .

[20]  L J Schreiner,et al.  Polymer gel dosimeters with reduced toxicity: a preliminary investigation of the NMR and optical dose–response using different monomers , 2006, Physics in medicine and biology.

[21]  C. Baldock,et al.  An experimental study of the dose response of polymer gel dosimeters imaged with x-ray computed tomography. , 2001, Physics in medicine and biology.

[22]  J. Gore,et al.  Radiation dose distributions in three dimensions from tomographic optical density scanning of polymer gels: I. Development of an optical scanner. , 1996, Physics in medicine and biology.

[23]  Jacqueline A Shipley,et al.  Transient elastography using impulsive ultrasound radiation force: a preliminary comparison with surface palpation elastography. , 2007, Ultrasound in medicine & biology.

[24]  J F Greenleaf,et al.  Probing the dynamics of tissue at low frequencies with the radiation force of ultrasound. , 2000, Physics in medicine and biology.

[25]  J. Gore,et al.  Polymer gels for magnetic resonance imaging of radiation dose distributions at normal room atmosphere. , 2001, Physics in medicine and biology.

[26]  C De Wagter,et al.  An investigation of the chemical stability of a monomer/polymer gel dosimeter. , 2000, Physics in medicine and biology.

[27]  J C Gore,et al.  Magnetic resonance imaging of radiation dose distributions using a polymer-gel dosimeter , 1994, Physics in medicine and biology.