Accurate buckling loads of thin rectangular plates under parabolic edge compressions by the differential quadrature method

The buckling of thin rectangular plates with nonlinearly distributed loadings along two opposite plate edges is analyzed by using the differential quadrature (DQ) method. The problem is considerably more complicated since it requires that first the plane elasticity problem be solved to obtain the distribution of in-plane stresses, and then the buckling problem be solved. Thus, very few analytical solutions (the only one available in the literature is for rectangular plates with all edges simply supported) have been available in the literature thus far. Detailed formulations and solution procedures are given herein. Nine combinations of boundary conditions and various aspect ratios are considered. Comparisons are made with a few existing analytical and/or finite element data. It has been found that a fast convergent rate can be achieved by the DQ method with non-uniform grids and very accurate results are obtained for the first time. It has also been found that the DQ results, verified by the finite element method with NASTRAN, are not quite close to the newly reported analytical solution. A possible reason is given to explain the difference.

[1]  Xinwei Wang,et al.  Differential quadrature for buckling analysis of laminated plates , 1995 .

[2]  C. Bert,et al.  Differential Quadrature Method in Computational Mechanics: A Review , 1996 .

[3]  M. B. Benoy.  An Energy Solution to the Buckling of Rectangular Plates Under Non-Uniform In-Plane Loading , 1969, The Aeronautical Journal (1968).

[4]  C. Shu.  Differential Quadrature and Its Application in Engineering , 2000 .

[5]  Xinwei Wang,et al.  Buckling analyses of anisotropic plates and isotropic skew plates by the new version differential quadrature method , 2003 .

[6]  Charles W. Bert,et al.  Buckling of rectangular plates subjected to nonlinearly distributed in-plane loading , 2003 .

[7]  Buckling caused by thermal stresses , 1956 .

[8]  C. Bert,et al.  Differential quadrature for static and free vibration analyses of anisotropic plates , 1993 .

[9]  A Van Der Neut,et al.  BUCKLING CAUSED BY THERMAL STRESSES, HIGH TEMPERATURE EFFECTS IN AIRCRAFT STRUCTURES , 1958 .

[10]  C. Bert,et al.  Two new approximate methods for analyzing free vibration of structural components , 1988 .

[11]  Xinwei Wang,et al.  FREE VIBRATION ANALYSES OF THIN SECTOR PLATES BY THE NEW VERSION OF DIFFERENTIAL QUADRATURE METHOD , 2004 .

[12]  Xinwei Wang,et al.  A NEW APPROACH IN APPLYING DIFFERENTIAL QUADRATURE TO STATIC AND FREE VIBRATIONAL ANALYSES OF BEAMS AND PLATES , 1993 .

[13]  M. Pandey,et al.  Differential quadrature method in the buckling analysis of beams and composite plates , 1991 .

[14]  R. Bellman,et al.  DIFFERENTIAL QUADRATURE AND LONG-TERM INTEGRATION , 1971 .

[15]  Xinwei Wang,et al.  STATIC ANALYSIS OF FRAME STRUCTURES BY THE DIFFERENTIAL QUADRATURE ELEMENT METHOD , 1997 .