An Improved Energy Matching Method to Utilize the Potential Energy of Large-sized Hydraulic Press at Multi-system Level

Abstract Large energy loss caused by mismatching and wasted potential energy, is a prominent problem for large-sized hydraulic press. The mismatch problem can be solved at the multi-system level of hydraulic press, where a drive system consisting of several drive zones provides energy to hydraulic presses according to the load profiles. Based on the multi-drive to multi-press system, we added a peer to peer mode, where the potential energy of the slider can be utilized mutually among these presses by combining the chambers of hydraulic cylinders. In this improved multi-system method, the number of drive zones can be reduced by combining operations and the matching degree is further improved. Meanwhile, the scheduling scheme needs to be redesigned according to the enhanced constraints of duration of each operation, which shows better energy-saving effect.

[1]  Lasse Laurila,et al.  Electric energy recovery system for a hydraulic forklift - theoretical and experimental evaluation , 2011 .

[2]  Petter Krus,et al.  Digital Hydraulic System Using Pumps and On/Off Valves Controlling the Actuator , 2014 .

[3]  Kyoung Kwan Ahn,et al.  Modeling and simulation of hydrostatic transmission system with energy regeneration using hydraulic accumulator , 2010 .

[4]  Sheng-dun Zhao,et al.  Fuzzy iterative learning control of electro-hydraulic servo system for SRM direct-drive volume control hydraulic press , 2010 .

[5]  Tao Wang,et al.  An Energy-Saving Pressure-Compensated Hydraulic System With Electrical Approach , 2014, IEEE/ASME Transactions on Mechatronics.

[6]  Jorge Ferreira,et al.  Close loop control of a hydraulic press for springback analysis , 2006 .

[7]  Roberto Camoirano,et al.  Variable frequency drives for MSF desalination plant and associated pumping stations , 2005 .

[8]  Heinrich Theissen,et al.  Energy Efficiency of Hydraulic Systems with Shared Digital Pumps , 2012 .

[9]  Sheng-dun Zhao,et al.  Application of self-tuning fuzzy PID controller for a SRM direct drive volume control hydraulic press , 2009 .

[10]  Chun-Lien Su,et al.  An Energy-Savings Evaluation Method for Variable-Frequency-Drive Applications on Ship Central Cooling Systems , 2014, IEEE Transactions on Industry Applications.

[11]  George T.-C. Chiu,et al.  Fuzzy controller design for synchronous motion in a dual-cylinder electro-hydraulic system , 2008 .

[12]  Kyoung Kwan Ahn,et al.  Comparison and assessment of a hydraulic energy-saving system for hydrostatic drives , 2011 .

[13]  Qingfeng Wang,et al.  Hydraulic accumulator-motor-generator energy regeneration system for a hybrid hydraulic excavator , 2012 .

[14]  W. Book,et al.  Application of Singular Perturbation Theory to Hydraulic Pump Controlled Systems , 2012, IEEE/ASME Transactions on Mechatronics.

[15]  Qingfeng Wang,et al.  Improvement of boom control performance for hybrid hydraulic excavator with potential energy recovery , 2013 .

[16]  Zhifeng Liu,et al.  Analytical energy dissipation in large and medium-sized hydraulic press , 2015 .

[17]  Qingfeng Wang,et al.  Research on the energy regeneration systems for hybrid hydraulic excavators , 2010 .

[18]  Yang Shi,et al.  Modeling and Robust Discrete-Time Sliding-Mode Control Design for a Fluid Power Electrohydraulic Actuator (EHA) System , 2013 .

[19]  Monika Ivantysynova,et al.  An Investigation of Swash Plate Control Concepts for Displacement Controlled Actuators , 2005 .

[20]  Zhifeng Liu,et al.  An energy-saving method to solve the mismatch between installed and demanded power in hydraulic press , 2016 .