LCA of petroleum-based lubricants: state of art and inclusion of additives

PurposeWhile the application of Life Cycle Assessment (LCA) to lubricants can be considered fully operational for general purposes outside the lubricants industry, where Life Cycle Inventories (LCIs) of mineral and synthetic base oils can be used interchangeably and where additives can be excluded, this is not the case for research and development purposes within the industry. Previous LCAs of base oils are not sufficiently detailed and comprehensive for R&D purposes, and there are no LCAs of lube additives and fully formulated lubricants. The aim of this paper is to integrate and expand previous LCAs of base oils and to investigate on the contribution of lube additives to the environmental impacts of a fully formulated lubricant.Materials and methodsThis study considers three base oils (mineral, poly-alpha-olefins (PAO) and hydrocracked) and a set of lubricating additives typically used in fully formulated engine oil. The LCA model is based on both industry and literature data.Results and discussionTrends in the lubricants industry towards more sophisticated base oils correspond to remarkably higher environmental impacts per kilogram of product but lead to reduced impacts per kilometre. The contribution of additives to the life cycle impacts of commercial lube oil was found to be remarkably high for some impact categories (nearly 35 % for global warming).ConclusionsAs base oil is concerned, this study made the point on data availability and provided a contribution in order to integrate and expand previous LCAs of mineral base oil and PAO. On the side of additives, the main conclusion is that in modern lubricants, the contribution of additives in terms of environmental impact can be remarkably high and, therefore, they should not be excluded.

[1]  Gerald Rebitzer,et al.  IMPACT 2002+: A new life cycle impact assessment methodology , 2003 .

[2]  H. So,et al.  Limitations on use of ZDDP as an antiwear additive in boundary lubrication , 2004 .

[3]  J. Eastoe,et al.  Nanotechnology in action: overbased nanodetergents as lubricant oil additives. , 2006, Advances in colloid and interface science.

[4]  Shelie A. Miller,et al.  A comparative life cycle assessment of petroleum and soybean-based lubricants. , 2007, Environmental science & technology.

[5]  M. Fox,et al.  Chemistry and Technology of Lubricants , 1992 .

[6]  R. Rosset,et al.  Isolation of polybutenylsuccinimide-type dispersants from multigrade lubricating oils by classical cation exchange chromatography , 1997 .

[7]  M. Braglia,et al.  Environmental efficiency analysis for ENI oil refineries , 2002 .

[8]  T. Mang,et al.  Lubricants and Lubrication , 2006 .

[9]  Reshef Tenne,et al.  New reactor for production of tungsten disulfide hollow onion-like (inorganic fullerene-like) nanoparticles , 2000 .

[10]  L. Rudnick.  Lubricant Additives: Chemistry and Applications , 2007 .

[11]  Pål Börjesson,et al.  Life cycle assessment of mineral oil-based and vegetable oil-based hydraulic fluids including comparison of biocatalytic and conventional production methods , 2011 .

[12]  Michael Wang,et al.  Allocation of energy use in petroleum refineries to petroleum products , 2004 .

[13]  K. Varlot,et al.  X-ray absorption study of antiwear films generated from ZDDP and borate micelles , 2001 .

[14]  Keith D. Bartle,et al.  A review of zinc dialkyldithiophosphates (ZDDPS): characterisation and role in the lubricating oil , 2001 .

[15]  L. Rudnick.  Lubricant Additives : Chemistry and Applications, Second Edition , 2009 .

[16]  John L. Hutchison,et al.  Bulk Synthesis of Inorganic Fullerene-like MS2 (M = Mo, W) from the Respective Trioxides and the Reaction Mechanism , 1996 .

[17]  V. J. Gatto,et al.  Size-exclusion chromatography method for characterizing low-molecular-mass antioxidant lubricant additives , 1999 .

[18]  Carlos Rodrigues Pereira Belchior,et al.  Lubricant viscosity and viscosity improver additive effects on diesel fuel economy , 2010 .

[19]  Thomas Norrby,et al.  A comparative life cycle assessment of the manufacture of base fluids for lubricants , 2002 .