Dynamic Modelling of Fault Slip Induced by Stress Waves due to Stope Production Blasts

Seismic events can take place due to the interaction of stress waves induced by stope production blasts with faults located in close proximity to stopes. The occurrence of such seismic events needs to be controlled to ensure the safety of the mine operators and the underground mine workings. This paper presents the results of a dynamic numerical modelling study of fault slip induced by stress waves resulting from stope production blasts. First, the calibration of a numerical model having a single blast hole is performed using a charge weight scaling law to determine blast pressure and damping coefficient of the rockmass. Subsequently, a numerical model of a typical Canadian metal mine encompassing a fault parallel to a tabular ore deposit is constructed, and the simulation of stope extraction sequence is carried out with static analyses until the fault exhibits slip burst conditions. At that point, the dynamic analysis begins by applying the calibrated blast pressure to the stope wall in the form of velocities generated by the blast holes. It is shown from the results obtained from the dynamic analysis that the stress waves reflected on the fault create a drop of normal stresses acting on the fault, which produces a reduction in shear stresses while resulting in fault slip. The influence of blast sequences on the behaviour of the fault is also examined assuming several types of blast sequences. Comparison of the blast sequence simulation results indicates that performing simultaneous blasts symmetrically induces the same level of seismic events as separate blasts, although seismic energy is more rapidly released when blasts are performed symmetrically. On the other hand when nine blast holes are blasted simultaneously, a large seismic event is induced, compared to the other two blasts. It is concluded that the separate blasts might be employed under the adopted geological conditions. The developed methodology and procedure to arrive at an ideal blast sequence can be applied to other mines where faults are found in the vicinity of stopes.

[1]  Y. Potvin,et al.  Interpretation of seismic data and numerical modelling of fault reactivation at El Teniente, Reservas Norte sector , 2010 .

[2]  Michael Alber,et al.  Rock mechanical investigations of seismic events in a deep longwall coal mine , 2009 .

[3]  G. Lyzenga,et al.  Stress patterns in an interplate shear zone: an effective anisotropic model and implications for the transverse ranges, California , 1986, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[4]  Jian Zhao,et al.  A study of UDEC modelling for blast wave propagation in jointed rock masses , 1998 .

[5]  Stephen D. McKinnon,et al.  The role of geologic structure and stress in triggering remote seismicity in Creighton Mine, Sudbury, Canada , 2013 .

[6]  L. John,et al.  Finite dynamic model for infinite media , 1969 .

[7]  G F Hofmann,et al.  Simulating fault slip areas of mining induced seismic tremors using static boundary element numerical modelling , 2011 .

[8]  Xin Huang,et al.  Analysis of Wave Propagation Through a Filled Rock Joint , 2010 .

[9]  B. Arjang,et al.  Pre-mining stresses at some hard rock mines in the Canadian Shield , 1989 .

[10]  D. Hedley,et al.  Rockburst handbook for Ontario hardrock mines , 1992 .

[11]  N. Barton,et al.  The shear strength of rock joints in theory and practice , 1977 .

[12]  B. G. White,et al.  Role Of Fault Slip On Mechanisms Of Rock Burst Damage, Lucky Friday Mine, Idaho, USA , 1900 .

[13]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[14]  S. Gibowicz,et al.  Comparison of source parameters estimated in the frequency and time domains for seismic events at the Rudna copper mine, Poland , 2008 .

[15]  Hani S. Mitri,et al.  Elastoplastic stability analysis of mine haulage drift in the vicinity of mined stopes , 2008 .

[16]  V. N. Mosinets,et al.  A seismological method of determining the parameters of the zones of deformation of rock by blasting , 1972, Soviet mining science.

[17]  Joseph A. Sharpe,et al.  The Production of Elastic Waves by Explosion Pressures. I. Theory and Empirical Field Observations , 1942 .

[18]  Per-Anders Persson,et al.  Rock Blasting and Explosives Engineering , 1993 .

[19]  Mark S. Diederichs,et al.  Instability of hard rockmasses, the role of tensile damage and relaxation , 2000 .

[20]  A. Daehnke.  Stress Wave And Fracture Propagation In Rock , 1999 .

[22]  Hani S. Mitri,et al.  Dynamic modelling of fault-slip with Barton׳s shear strength model , 2014 .

[23]  Bronwyn van Gool,et al.  Effects of blasting on the stability of paste fill stopes at Cannington Mine , 2007 .

[24]  D. P. Blair,et al.  Dynamic response of an elastic and viscoelastic full-space to a spherical source , 1995 .

[25]  G. Herget,et al.  ground stresses in the Canadian hardrock mines: An update , 1997 .

[26]  W. F. Bawden,et al.  Measurement and analysis of near-field blast vibration and damage , 1994 .

[27]  W. Ortlepp,et al.  Observation of mining-induced faults in an intact rock mass at depth , 2000 .

[28]  Hani S. Mitri,et al.  Production Blast-Induced Vibrations in Longhole Open Stoping: A Case Study , 2010 .

[29]  P. K. Kaiser,et al.  Quantification of rock mass damage in underground excavations from microseismic event monitoring , 2001 .

[30]  Benoît Valley,et al.  Global Approach to Managing Deep Mining Hazards , 2009 .