Two-directional toolpath correction in single-point incremental forming using model predictive control

Incremental sheet forming (ISF) is an emerging forming technology that promises high flexibility and formability. These properties make it suited for small-scale and customised production. However, the poor geometric accuracy of ISF limits the wide application of this flexible forming technology. This paper presents a two-directional toolpath correction approach to enhance ISF forming accuracy using a model predictive control (MPC) algorithm. A toolpath optimisation method for vertical toolpath correction has been validated in our previous work (Lu et al., Int J Adv Manuf Technol 72:1–14, 2015), and it helps to reduce errors in the base of the test shapes to a suitable level while its major limitation is that horizontal geometric errors are relatively large. This paper extends our previous work (Lu et al., Int J Adv Manuf Technol 72:1–14, 2015) by augmenting the vertical control module with a new control module for horizontal toolpath correction. The proposed control algorithm was experimentally validated in single-point incremental sheet forming (SPIF) using two forming case studies. In the first case study (a truncated pyramid), two control approaches with different assumptions for the horizontal springback distribution along the horizontal cross-sectional profile were tested and compared. Then, the developed MPC control algorithm was applied to form a more complex asymmetric shape. The results show that the developed strategy can reduce the forming errors in the wall and base of the formed shape compared to the existing works. The ISF process with MPC control leads to significant accuracy improvement in comparison with the typical ISF process that is without toolpath control.

[1]  Markus Bambach,et al.  Strategies to improve the geometric accuracy in asymmetric single point incremental forming , 2009, Prod. Eng..

[2]  Aldo Attanasio,et al.  Optimization of tool path in two points incremental forming , 2006 .

[3]  Markus Bambach,et al.  Investigation into a new hybrid forming process: Incremental sheet forming combined with stretch forming , 2009 .

[4]  Elisabetta Ceretti,et al.  Part precision improvement in incremental sheet forming of not axisymmetric parts using an artificial cognitive system , 2015 .

[5]  Markus Bambach,et al.  Forming strategies and Process Modelling for CNC Incremental Sheet Forming , 2004 .

[6]  Paul A. Meehan,et al.  Model predictive control of incremental sheet forming for geometric accuracy improvement , 2016 .

[7]  Hiroshi Hamasaki,et al.  Air bending and springback of stainless steel clad aluminum sheet , 2010 .

[8]  Stephen Duncan,et al.  Constrained model predictive control of an incremental sheet forming process , 2011, 2011 IEEE International Conference on Control Applications (CCA).

[9]  Julian M. Allwood,et al.  Closed-loop feedback control of product properties in flexible metal forming processes with mobile tools , 2009 .

[10]  Fabrizio Micari,et al.  Shape and dimensional accuracy in Single Point Incremental Forming: State of the art and future trends , 2007 .

[11]  Meftah Hrairi,et al.  Research and Progress in Incremental Sheet Forming Processes , 2011 .

[12]  Paul A. Meehan,et al.  Simulation and Experimental Observations of Effect of Different Contact Interfaces on the Incremental Sheet Forming Process , 2014 .

[13]  Bert Lauwers,et al.  Tool path compensation strategies for single point incremental sheet forming using multivariate adaptive regression splines , 2013, Comput. Aided Des..

[14]  Giuseppina Ambrogio,et al.  A novel approach based on multiple back-drawing incremental forming to reduce geometry deviation , 2009 .

[15]  Marko Bacic,et al.  Model predictive control , 2003 .

[16]  Bert Lauwers,et al.  Tool path generation for single point incremental forming using intelligent sequencing and multi-step mesh morphing techniques , 2013 .

[17]  M. Muzzupappa,et al.  Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation , 2004 .