Thermo-electro-chemical storage (TECS) of solar energy

Abstract A new approach for solar electricity generation and storage is proposed, based on the concept of thermally regenerative batteries. Concentrated sunlight is used for external thermo-chemical charging of a flow battery, and electricity is produced by conventional electro-chemical discharge of the battery. The battery replaces the steam turbine, currently used in commercial concentrated solar power (CSP) plants, potentially leading to much higher conversion efficiency. This approach offers potential performance, cost and operational advantages compared to existing solar technologies, and to existing storage solutions for management of an electrical grid with a significant contribution of intermittent solar electricity generation. Here we analyze the theoretical conversion efficiency for new thermo-electro-chemical storage (TECS) plant schemes based on the electro-chemical systems of sodium-sulfur (Na-S) and zinc-air. The thermodynamic upper limit of solar to electricity conversion efficiency for an ideal TECS cycle is about 60% for Na-S at reactor temperature of 1550 K, and 65% for the zinc-air system at 1750 K, both under sunlight concentration of 3000. A hybrid process with carbothermic reduction in the zinc-air system reaches 60% theoretical efficiency at the more practical conditions of reaction temperature

[1]  Robert Pitz-Paal,et al.  Concentrating Solar Power in Europe, the Middle East and North Africa: A Review of Development Issues and Potential to 2050 , 2012 .

[2]  Paul Denholm,et al.  Enabling Greater Penetration of Solar Power via the Use of CSP with Thermal Energy Storage , 2011 .

[3]  B. Agruss,et al.  The Thermally Regenerative Liquid‐Metal Cell , 1963 .

[4]  Elias K. Stefanakos,et al.  Thermal energy storage technologies and systems for concentrating solar power plants , 2013 .

[5]  Pucheng Pei,et al.  Technologies for extending zinc–air battery’s cyclelife: A review , 2014 .

[6]  Aldo Steinfeld,et al.  A 300kW Solar Chemical Pilot Plant for the Carbothermic Production of Zinc , 2006 .

[7]  Nirmal K. Gupta,et al.  Thermodynamic and Physical Properties of Molten Sodium Polysulfides from Open‐Circuit Voltage Measurements , 1972 .

[8]  Irina Vishnevetsky,et al.  Solar carbothermic reduction of alumina, magnesia and boria under vacuum , 2015 .

[9]  Brian L. Spatocco,et al.  Liquid metal batteries: past, present, and future. , 2013, Chemical reviews.

[10]  Muyiwa Adaramola.  ENABLING GREATER PENETRATION OF SOLAR POWER VIA THE USE OF CSP WITH THERMAL ENERGY STORAGE , 2014 .

[11]  I. S. Kulikov.  Thermal dissociation of chemical compounds , 1967 .

[12]  N. Tzouganatos,et al.  On the Development of a Zinc Vapor Condensation Process for the Solar Carbothermal Reduction of Zinc Oxide , 2015 .

[13]  Lide M. Rodriguez-Martinez,et al.  Performance and stability of a liquid anode high-temperature metal-air battery , 2014 .

[14]  Guosong Hong,et al.  Advanced zinc-air batteries based on high-performance hybrid electrocatalysts , 2013, Nature Communications.

[15]  Jihong Wang,et al.  Overview of current development in electrical energy storage technologies and the application potential in power system operation , 2015 .

[16]  Jinyue Yan,et al.  A review on compressed air energy storage: Basic principles, past milestones and recent developments , 2016 .

[17]  T. Kousksou,et al.  Energy storage: Applications and challenges , 2014 .

[18]  Anton Meier,et al.  Pilot Scale Demonstration of a 100-kWth Solar Thermochemical Plant for the Thermal Dissociation of ZnO , 2014 .

[19]  E. A. Fletcher,et al.  Hydrogen- and Oxygen from Water , 1977, Science.

[20]  James C. Hesson,et al.  Thermodynamics and Thermal Efficiencies of Thermally Regenerative Bimetallic and Hydride EMF Cell Systems , 1967 .

[21]  Robert R. Heinrich,et al.  Thermodynamics of the Lithium Hydride Regenerative Cell , 1967 .

[22]  Elysia J. Sheu,et al.  A Review of Hybrid Solar–Fossil Fuel Power Generation Systems and Performance Metrics , 2012 .

[23]  Boyd Davis,et al.  Towards an organic thermally regenerative fuel cell for truck engines , 2012 .

[24]  Zhonghua Gu,et al.  Main Challenges for High Performance NAS Battery: Materials and Interfaces , 2013 .

[25]  Bao‐guo Wang,et al.  Development and Characterization of an Electrically Rechargeable Zinc-Air Battery Stack , 2014 .

[26]  D. Linden.  Handbook Of Batteries , 2001 .

[27]  Changying Zhao,et al.  A review of solar collectors and thermal energy storage in solar thermal applications , 2013 .

[28]  I. Barin.  Thermochemical data of pure substances , 1989 .

[29]  Aldo Steinfeld,et al.  Solar Thermal Reduction of ZnO Using CH4:ZnO and C:ZnO Molar Ratios Less Than 1 , 2002 .

[30]  J. L. Sudworth,et al.  The sodium/sulphur battery , 1984 .

[31]  Arthur D. Pelton,et al.  The Na-S (Sodium-Sulfur) System , 1997 .

[32]  Aldo Steinfeld,et al.  SECONDARY BATTERIES – ZINC SYSTEMS | Zinc Electrodes: Solar Thermal Production , 2009 .

[33]  Benedetto Bozzini,et al.  Materials science aspects of zinc–air batteries: a review , 2014, Materials for Renewable and Sustainable Energy.

[34]  C. E. Crouthamel,et al.  Regenerative EMF Cells , 1967 .

[35]  G. Janz,et al.  Physical properties data compilations relevant to energy storage. II. Molten salts: data on single and multi-component salt systems , 1979 .

[36]  D. Bradwell,et al.  Magnesium-antimony liquid metal battery for stationary energy storage. , 2012, Journal of the American Chemical Society.

[37]  Geoffrey P. Hammond,et al.  Indicative energy technology assessment of advanced rechargeable batteries , 2015 .