Aerosol assisted fabrication of metallic film/carbon fiber and heat treatment to form crystalline alloy film

[1]  Hideaki Takahashi,et al.  Palladium nanoparticle seeded electroless metallization of Al/Al2O3 surfaces , 2009 .

[2]  H. Omidvar,et al.  Deposition of thin films of Ni–P and Ni–B–P by dynamic chemical plating , 2008 .

[3]  Jae Hong Park,et al.  Spark generation of monometallic and bimetallic aerosol nanoparticles , 2008 .

[4]  G. Zou,et al.  Preparation and study on radar absorbing materials of nickel-coated carbon fiber and flake graphite , 2008 .

[5]  Lei Liu,et al.  Electroless plating of Cu-Ni-P alloy on PET fabrics and effect of plating parameters on the properties of conductive fabrics , 2008 .

[6]  K. Yoon,et al.  Electroless copper deposition on a pitch-based activated carbon fiber and an application for NO removal , 2008 .

[7]  J. Byeon,et al.  Catalytic Activation of Activated Carbon Fibers via Palladium Aerosol Nanoparticles for Use in Electroless Silver Deposition , 2008 .

[8]  K. Yoon,et al.  Antimicrobial effect of silver particles on bacterial contamination of activated carbon fibers. , 2008, Environmental science & technology.

[9]  Jae Hong Park,et al.  Characteristics of electroless copper-deposited activated carbon fibers for antibacterial action and adsorption-desorption of volatile organic compounds , 2007 .

[10]  F. Shmidt,et al.  Preparation of high-performance nanosized palladium hydrogenation catalysts using white phosphorus and phosphine , 2007 .

[11]  Jae‐Young Lee,et al.  Electroless nickel plating on patterned catalytic surfaces by electron beam lithography , 2007 .

[12]  K. D. Clerck,et al.  Electroconductive textile structures through electroless deposition of polypyrrole and copper at polyaramide surfaces , 2006 .

[13]  S. Ryu,et al.  Physical property and electrical conductivity of electroless Ag-plated carbon fiber-reinforced paper , 2006 .

[14]  T. Hara,et al.  Development of a high-strength high-conductivity Cu-Ni-P alloy. Part I: Characterization of precipitation products , 2006 .

[15]  S. Tzeng.  Catalytic graphitization of electroless Ni–P coated PAN-based carbon fibers , 2006 .

[16]  S. Yazdani,et al.  Fatigue Properties of a Ck45 Steel Coated with a Post-Heat Treated Ni-Cu-P Electroless Deposit , 2006 .

[17]  M. Cherkaoui,et al.  Electroless deposition of copper in acidic solutions using hypophosphite reducing agent , 2006 .

[18]  Fangqiong Tang,et al.  Electroless nickel deposition on amino-functionalized silica spheres , 2005 .

[19]  K. Ziewiec.  Kinetics of phase transformations in Ni87P13 alloy upon heating , 2005 .

[20]  Yoshio Kobayashi,et al.  Deposition of gold nanoparticles on silica spheres by electroless metal plating technique. , 2005, Journal of colloid and interface science.

[21]  B. Bein,et al.  The influence of mechanical adhesion of copper coatings on carbon surfaces on the interfacial thermal contact resistance , 2003 .

[22]  H. Ashassi-Sorkhabi,et al.  Electroless deposition of Ni–Cu–P alloy and study of the influences of some parameters on the properties of deposits , 2002 .

[23]  S. Tzeng,et al.  Electrical resistivity of electroless nickel coated carbon fibers , 2001 .

[24]  Guo Xiaoxia,et al.  Preparation of asymmetric Ni/ceramic composite membrane by electroless plating , 2001 .

[25]  J. Georgieva,et al.  Electroless Deposition of Ni ‐ Cu ‐ P Alloys in Acidic Solutions , 1999 .

[26]  W. Bonfield,et al.  Fracture of aluminium-coated carbon fibres , 1978 .

[27]  P. Jackson,et al.  The short-term compatibility of carbon fibres with aluminium , 1972 .

[28]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[29]  C. Chung,et al.  Control of topographical selectivity in palladium-activated electroless copper metallization , 2005 .