Recent UK research and the development of high temperature design methods

Abstract The paper outlines recent research and development activities on high temperature design methods and criteria for high temperature components as utilized by liquid metal cooled fast breeder reactors.

[1]  J. Bree.  Elastic-plastic behaviour of thin tubes subjected to internal pressure and intermittent high-heat fluxes with application to fast-nuclear-reactor fuel elements , 1967 .

[2]  R. Hales.  A METHOD OF CREEP DAMAGE SUMMATION BASED ON ACCUMULATED STRAIN FOR THE ASSESSMENT OF CREEP‐FATIGUE ENDURANCE , 1983 .

[3]  Zenon Mróz,et al.  On the description of anisotropic workhardening , 1967 .

[4]  S. Karadeniz,et al.  A linear programming upper bound approach to the shakedown limit of thin shells subjected to variable thermal loading , 1984 .

[5]  Yannis F. Dafalias,et al.  Plastic Internal Variables Formalism of Cyclic Plasticity , 1976 .

[6]  E. Krempl,et al.  A uniaxial viscoplastic model based on total strain and overstress , 1979 .

[7]  Robert A. Ainsworth,et al.  Assessment of the integrity of structures containing defects , 1987 .

[8]  F. A. Leckie,et al.  The Development of High Temperature Design Methods Based on Reference Stresses and Bounding Theorems , 1979 .

[9]  H. G. Lyall,et al.  Gas-cooled reactors today , 1983 .

[10]  F. A. Leckie,et al.  Review of bounding techniques in shakedown and ratcheting at elevated temperature , 1974 .

[11]  A. Clayton,et al.  Structural Assessment Techniques for Thermal Striping , 1987 .

[12]  C. E. Pugh,et al.  Progress in Developing Constitutive Equations for Inelastic Design Analysis , 1983 .

[13]  R. Hales,et al.  A QUANTITATIVE METALLOGRAPHIC ASSESSMENT OF STRUCTURAL DEGRADATION OF TYPE 316 STAINLESS STEEL DURING CREEP‐FATIGUE , 1980 .

[14]  Alan K. Miller,et al.  An Inelastic Constitutive Model for Monotonic, Cyclic, and Creep Deformation: Part I—Equations Development and Analytical Procedures , 1976 .

[15]  A. Ponter,et al.  On the Relationship Between Plastic Shakedown and the Repeated Loading of Creeping Structures , 1971 .

[16]  Robert A. Ainsworth,et al.  Some observations on creep crack growth , 1982 .

[17]  R. A. Ainsworth,et al.  Defect Assessments at Elevated Temperature , 1983 .