Exergy analysis and optimization of R600a as a replacement of R134a in a domestic refrigerator system

Abstract Exergy analysis was applied to investigate the performance of a domestic refrigerator originally manufactured to use 145 g of R134a. It was found that the highest exergy destruction occurred in the compressor followed by the condenser, capillary tube, evaporator, and superheating coil. Taguchi method was applied to design experiments to minimize exergy destruction while using R600a. Taguchi parameters were selected by the obtained results from R134a and an experiment using 60 g of R600a, which indicated similar results as R134a. Based on the outcomes, R600a charge amount, condenser fan rotational velocity and compressor coefficient of performance were selected for the design. The analysis of variance results indicated that R600a charge amount was the most effective parameter. At the optimum condition, the amount of charge required for R600a was 50 g, 66% lower than R134a one, which not only brings economic advantages, but also significantly reduces the risk of flammability of the hydrocarbon refrigerant.

[1]  Onder Kizilkan,et al.  Performance and exergetic analysis of vapor compression refrigeration system with an internal heat exchanger using a hydrocarbon, isobutane (R600a) , 2008 .

[2]  Hui Li,et al.  EXERGY ANALYSIS OF A DUAL-MODE REFRIGERATION SYSTEM FOR ICE STORAGE AIR CONDITIONING , 2005 .

[3]  Man-Hoe Kim,et al.  The performance analysis of a hydrocarbon refrigerant R-600a in a household refrigerator/freezer , 1998 .

[4]  Omer Comakli,et al.  Determination of optimum working conditions in heat-pumps using nonazeotropic refrigerant mixtures , 1999 .

[5]  D. R. Riffe.  Isobutane as a Refrigerator Freezer Refrigerant , 1994 .

[6]  B. Thonon.  A review of hydrocarbon two-phase heat transfer in compact heat exchangers and enhanced geometries , 2008 .

[7]  James M. Calm,et al.  The next generation of refrigerants – Historical review, considerations, and outlook , 2008 .

[8]  Shyi-Min Lu,et al.  Optimum design of natural-circulation solar-water-heater by the Taguchi method , 2003 .

[9]  Wataru Nakayama,et al.  A methodology to work on geometrically complex heat transfer systems: the cases of heat conduction through composite slabs , 2003 .

[10]  B. Palm.  Hydrocarbons as refrigerants in small heat pump and refrigeration systems – A review , 2008 .

[11]  Chin-Chia Su,et al.  Experimental studies of isobutane (R600a) as the refrigerant in domestic refrigeration system , 2002 .

[12]  Eric Johnson,et al.  Global warming from hfc , 1998 .

[13]  D Colbourne,et al.  A Risk Assessment Model for Hydrocarbon Refrigerants. , 2003 .

[14]  E. Granryd.  Hydrocarbons as refrigerants — an overview , 2001 .

[15]  Genichi Taguchi.  System Of Experimental Design: Engineering Methods To Optimize Quality And Minimize Costs , 1987 .

[16]  Kwan-Soo Lee,et al.  Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins , 2000 .

[17]  Madhan Shridhar Phadke,et al.  Quality Engineering Using Robust Design , 1989 .

[18]  Aj Gigiel.  Safety testing of domestic refrigerators using flammable refrigerants , 2004 .

[19]  S. Jayaraj,et al.  A review on recent developments in new refrigerant mixtures for vapour compression‐based refrigeration, air‐conditioning and heat pump units , 2011 .

[20]  P Srinivas.  Design optimization of refrigeration system for alternative refrigerants , 2010 .

[21]  Ibrahim Dincer,et al.  Energy, Entropy and Exergy Concepts and Their Roles in Thermal Engineering , 2001, Entropy.

[22]  Reinhard Radermacher,et al.  Domestic refrigerators : recent developments , 1996 .

[23]  John Stufken,et al.  Taguchi Methods: A Hands-On Approach , 1992 .

[24]  B. Sahin,et al.  Thermal performance analysis and optimum design parameters of heat exchanger having perforated pin fins , 2008 .

[25]  A. Stegou-Sagia,et al.  Exergy losses in refrigerating systems. A study for performance comparisons in compressor and condenser , 2003 .

[26]  S. C. Kaushik,et al.  Theoretical analysis of a vapour compression refrigeration system with R502, R404A and R507A , 2008 .

[27]  J. U. Ahamed,et al.  Prospect of hydrocarbon uses based on exergy analysis in the vapor compression refrigeration system , 2011, 2011 IEEE Conference on Clean Energy and Technology (CET).

[28]  J. U. Ahamed,et al.  Thermodynamic performance analysis of R-600 and R-600a as refrigerant , 2010 .

[29]  Mehmet Yilmaz,et al.  ANALYSIS OF HEAT PUMPS WITH ZEOTROPIC REFRIGERANT MIXTURES BY TAGUCHI METHOD , 2010 .

[30]  Ibrahim Dincer,et al.  Thermodynamic aspects of renewables and sustainable development , 2005 .

[31]  Mehdi Rasti,et al.  Enhancement of domestic refrigerator’s energy efficiency index using a hydrocarbon mixture refrigerant , 2012 .

[32]  Omar Abdelaziz,et al.  Advances in household appliances- A review , 2011 .

[33]  Bayram Sahin,et al.  Performance analysis of a heat exchanger having perforated square fins , 2008 .

[34]  Arif Hepbasli.  Thermoeconomic analysis of household refrigerators , 2007 .

[35]  Hilmi Cenk Bayrakçi,et al.  Energy and exergy analysis of vapor compression refrigeration system using pure hydrocarbon refrigerants , 2009 .

[36]  Mo Se Kim,et al.  Performance and heat transfer characteristics of hydrocarbon refrigerants in a heat pump system , 2000 .

[37]  S. Riffat,et al.  Monitoring hydrofluorocarbon refrigerant leakage from air-conditioning systems in buildings , 1996 .

[38]  Isak Kotcioglu,et al.  Experimental investigation for optimization of design parameters in a rectangular duct with plate-fins heat exchanger by Taguchi method , 2013 .

[39]  Omer Comakli,et al.  Determination of optimum working conditions R22 and R404A refrigerant mixtures in heat-pumps using Taguchi method , 2009 .

[40]  R. Bugarel,et al.  Exergy analysis of a compression refrigeration system , 1989 .

[41]  Genichii Taguchi,et al.  Introduction to quality engineering. designing quality into products a , 1986 .

[42]  S. Jayaraj,et al.  Environment friendly alternatives to halogenated refrigerants—A review , 2009 .

[43]  Kadir Bilen,et al.  A Taguchi approach for investigation of heat transfer from a surface equipped with rectangular blocks , 2001 .

[44]  T. R. Bement,et al.  Taguchi techniques for quality engineering , 1995 .

[45]  S. Anand,et al.  Exergy analysis and experimental study of a vapor compression refrigeration cycle , 2012, Journal of Thermal Analysis and Calorimetry.

[46]  A. Bejan.  Fundamentals of exergy analysis, entropy generation minimization, and the generation of flow architecture , 2002 .

[47]  Pressure drop of HFC refrigerants inside evaporator and condenser coils as determined by CFD , 2001 .

[48]  Zhijiu Chen,et al.  Parametric study on the performance of a heat exchanger with corrugated louvered fins , 2007 .