Occupational Exposure to Silica in Construction Workers: A Literature-Based Exposure Database

We created an exposure database of respirable crystalline silica levels in the construction industry from the literature. We extracted silica and dust exposure levels in publications reporting silica exposure levels or quantitative evaluations of control effectiveness published in or after 1990. The database contains 6118 records (2858 of respirable crystalline silica) extracted from 115 sources, summarizing 11,845 measurements. Four hundred and eighty-eight records represent summarized exposure levels instead of individual values. For these records, the reported summary parameters were standardized into a geometric mean and a geometric standard deviation. Each record is associated with 80 characteristics, including information on trade, task, materials, tools, sampling strategy, analytical methods, and control measures. Although the database was constructed in French, 38 essential variables were standardized and translated into English. The data span the period 1974–2009, with 92% of the records corresponding to personal measurements. Thirteen standardized trades and 25 different standardized tasks are associated with at least five individual silica measurements. Trade-specific respirable crystalline silica geometric means vary from 0.01 (plumber) to 0.30 mg/m3 (tunnel construction skilled labor), while tasks vary from 0.01 (six categories, including sanding and electrical maintenance) to 1.59 mg/m3 (abrasive blasting). Despite limitations associated with the use of literature data, this database can be analyzed using meta-analytical and multivariate techniques and currently represents the most important source of exposure information about silica exposure in the construction industry. It is available on request to the research community. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplementary resource: appendices containing a list of data sources and detailed descriptions of each parameter.]

[1]  S. Rappaport,et al.  Statistical modeling to determine sources of variability in exposures to welding fumes. , 2011, The Annals of occupational hygiene.

[2]  Charles Beaudry,et al.  Investigation of determinants of past and current exposures to formaldehyde in the reconstituted wood panel industry in Quebec. , 2005, The Annals of occupational hygiene.

[3]  M Gérin,et al.  Monte Carlo simulation to reconstruct formaldehyde exposure levels from summary parameters reported in the literature. , 2007, The Annals of occupational hygiene.

[4]  C. Money,et al.  Improved use of workplace exposure data in the regulatory risk assessment of chemicals within Europe. , 2002, The Annals of occupational hygiene.

[5]  R. Hornung,et al.  Estimation of Average Concentration in the Presence of Nondetectable Values , 1990 .

[6]  P. Stewart,et al.  Issues When Modeling Benzene, Toluene, and Xylene Exposures Using a Literature Database , 2007, Journal of occupational and environmental hygiene.

[7]  Igor Burstyn,et al.  Variability in Quartz Exposure in the Construction Industry: Implications for Assessing Exposure-Response Relations , 2004, Journal of occupational and environmental hygiene.

[8]  이수정.  해외산업간호정보 - 미국 산업안전보건연구원(National Institute for Occupational Safety and Health) 소개 , 2009 .

[9]  Alex Burdorf,et al.  Commentary: variability in workplace exposures and the design of efficient measurement and control strategies. , 2003, The Annals of occupational hygiene.

[10]  Donguk Park,et al.  Determinants of exposure to metalworking fluid aerosols: a literature review and analysis of reported measurements. , 2009, The Annals of occupational hygiene.

[11]  Erik Olsen,et al.  European Proposal for Core Information for the Storage and Exchange of Workplace Exposure Measurements on Chemical Agents , 1997 .

[12]  P. Stewart,et al.  Statistical modeling of occupational chlorinated solvent exposures for case-control studies using a literature-based database. , 2010, The Annals of occupational hygiene.

[13]  Morton Lippmann,et al.  Data Elements for Occupational Exposure Databases: Guidelines and Recommendations for Airborne Hazards and Noise , 1996 .

[14]  G. Sciarra,et al.  Validity of empirical models of exposure in asphalt paving , 2002, Occupational and environmental medicine.

[15]  Maria Blettner,et al.  Meta-Analysis in Epidemiology , 2005 .

[16]  D. Verma,et al.  Current chemical exposures among Ontario construction workers. , 2003, Applied Occupational and Environmental Hygiene.

[17]  Pam Susi,et al.  Excessive exposure to silica in the US construction industry. , 2003, The Annals of occupational hygiene.

[18]  Janice Camp,et al.  Silica Exposure on Construction Sites: Results of an Exposure Monitoring Data Compilation Project , 2006, Journal of occupational and environmental hygiene.