Multilevel Optimization Framework for Hierarchical Stiffened Shells Accelerated by Adaptive Equivalent Strategy

In order to improve the post-buckling optimization efficiency of hierarchical stiffened shells, a multilevel optimization framework accelerated by adaptive equivalent strategy is presented in this paper. Firstly, the Numerical-based Smeared Stiffener Method (NSSM) for hierarchical stiffened shells is derived by means of the numerical implementation of asymptotic homogenization (NIAH) method. Based on the NSSM, a reasonable adaptive equivalent strategy for hierarchical stiffened shells is developed from the concept of hierarchy reduction. Its core idea is to self-adaptively decide which hierarchy of the structure should be equivalent according to the critical buckling mode rapidly predicted by NSSM. Compared with the detailed model, the high prediction accuracy and efficiency of the proposed model is highlighted. On the basis of this adaptive equivalent model, a multilevel optimization framework is then established by decomposing the complex entire optimization process into major-stiffener-level and minor-stiffener-level sub-optimizations, during which Fixed Point Iteration (FPI) is employed to accelerate convergence. Finally, the illustrative examples of the multilevel framework is carried out to demonstrate its efficiency and effectiveness to search for the global optimum result by contrast with the single-level optimization method. Remarkably, the high efficiency and flexibility of the adaptive equivalent strategy is indicated by compared with the single equivalent strategy.

[1]  Richard Butler,et al.  Bilevel Optimization and Postbuckling of Highly Strained Composite Stiffened Panels , 2006 .

[2]  A. Beukers,et al.  Optimization of Sandwich Composites Fuselages Under Flight Loads , 2012, Applied Composite Materials.

[3]  Luca Lanzi,et al.  A numerical and experimental investigation on composite stiffened panels into post-buckling , 2004 .

[4]  G. Cheng,et al.  Novel numerical implementation of asymptotic homogenization method for periodic plate structures , 2014 .

[5]  Bo Wang,et al.  Hybrid optimization of hierarchical stiffened shells based on smeared stiffener method and finite element method , 2014 .

[6]  Adrian Murphy,et al.  Wing Panel Design with Novel Skin-Buckling Containment Features , 2016 .

[7]  Yu Sun,et al.  Hybrid analysis and optimization of hierarchical stiffened plates based on asymptotic homogenization method , 2015 .

[8]  S. Tsai,et al.  Analysis and Optimum Design of Composite Grid Structures , 1996 .

[9]  Abbas Vafaeesefat,et al.  Head Shape and Winding Angle Optimization of Composite Pressure Vessels Based on a Multi-level Strategy , 2007 .

[10]  Bo Wang,et al.  Two-stage size-layout optimization of axially compressed stiffened panels , 2014 .

[11]  Haoran Chen,et al.  Buckling resistance of grid-stiffened carbon-fiber thin-shell structures , 2013 .

[12]  Bo Wang,et al.  Numerical investigation into the buckling behavior of advanced grid stiffened composite cylindrical shell , 2014 .

[13]  Bo Wang,et al.  Optimum design of hierarchical stiffened shells for low imperfection sensitivity , 2014 .

[14]  Y. Lei,et al.  Trans-scale modeling framework for failure analysis of cryogenic composite tanks , 2016 .

[15]  Jian Song,et al.  Finite Element Analysis of 2.5D Woven Composites, Part I: Microstructure and 3D Finite Element Model , 2016, Applied Composite Materials.

[16]  John R. Olds,et al.  Evaluation of Multidisciplinary Optimization Techniques Applied to a Reusable Launch Vehicle , 2006 .

[17]  Bo Wang,et al.  Numerical-based smeared stiffener method for global buckling analysis of grid-stiffened composite cylindrical shells , 2016 .

[18]  Chiara Bisagni,et al.  Numerical analysis and experimental correlation of composite shell buckling and post-buckling , 2000 .

[19]  Richard Butler,et al.  Optimum buckling design of compression panels using VICONOPT , 1993 .

[20]  M. Ren,et al.  Resin Flow of an Advanced Grid-Stiffened Composite Structure in the Co-Curing Process , 2013, Applied Composite Materials.

[21]  Yuanming Xu,et al.  Study on the thermal buckling and post-buckling of metallic sub-stiffening structure and its optimization , 2016 .

[22]  Zafer Gürdal,et al.  Optimum tailoring of fibre-steered longitudinally stiffened cylinders , 2015 .

[23]  Gang Li,et al.  Hybrid Framework for Reliability-Based Design Optimization of Imperfect Stiffened Shells , 2015 .

[24]  Tong-Yi Zhang,et al.  The Secondary Buckling and Design Criterion of Composite Laminated Cylindrical Shells , 2012, Applied Composite Materials.

[25]  Adrian Murphy,et al.  Non-Prismatic Sub-Stiffening for Stiffened Panel Plates — Stability Behaviour and Performance Gains , 2010 .

[26]  Luca Sorrentino,et al.  Design and manufacturing of an isogrid structure in composite material: Numerical and experimental results , 2016 .

[27]  Masoud Rais-Rohani,et al.  A multilevel approach for analysis and optimization of nano-enhanced composite structures , 2015 .

[28]  Vincent K. Maes,et al.  An efficient semi-automated optimisation approach for (grid-stiffened) composite structures: Application to Ariane 6 Interstage , 2016, Composite Structures.

[29]  Gengdong Cheng,et al.  Novel implementation of homogenization method to predict effective properties of periodic materials , 2013 .

[30]  Su-Seng Pang,et al.  Buckling load analysis of grid stiffened composite cylinders , 2003 .

[31]  Patrice Cartraud,et al.  Homogenization of corrugated core sandwich panels , 2003 .

[32]  Gang Li,et al.  Integrated optimization of hybrid-stiffness stiffened shells based on sub-panel elements , 2016 .

[33]  Bo Wang,et al.  Efficient Optimization of Cylindrical Stiffened Shells with Reinforced Cutouts by Curvilinear Stiffeners , 2016 .

[34]  Aniello Riccio,et al.  Finite Element Analysis of the Stability (Buckling and Post-Buckling) of Composite Laminated Structures: Well Established Procedures and Challenges , 2012, Applied Composite Materials.

[35]  Bei Zhang,et al.  A novel all-composite blast-resistant door structure with hierarchical stiffeners , 2016 .

[36]  Su-Seng Pang,et al.  Optimization for buckling loads of grid stiffened composite panels , 2003 .

[37]  A. Cherniaev,et al.  Multistep Optimization of Composite Drive Shaft Subject to Strength, Buckling, Vibration and Manufacturing Constraints , 2015, Applied Composite Materials.