Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speeds, Part II - Experimental validation using Infra-Red transition measurement from Wind Tunnel tests

In the present paper, an ‘in-house’ genetic algorithm was numerically and experimentally validated. The genetic algorithm was applied to an optimization problem for improving the aerodynamic performances of an aircraft wing tip through upper surface morphing. The optimization was performed for 16 flight cases expressed in terms of various combinations of speeds, angles of attack and aileron deflections. The displacements resulted from the optimization were used during the wind tunnel tests of the wing tip demonstrator for the actuators control to change the upper surface shape of the wing. The results of the optimization of the flow behavior for the airfoil morphing upper-surface problem were validated with wind tunnel experimental transition results obtained with infra-red Thermography on the wing-tip demonstrator. The validation proved that the 2D numerical optimization using the ‘in-house’ genetic algorithm was an appropriate tool in improving various aspects of a wing’s aerodynamic performances.

[1]  Mary Frecker,et al.  Optimal actuator location within a morphing wing scissor mechanism configuration , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2]  Hao Zhang,et al.  An Artificial Bee Colony Algorithm Approach for Routing in VLSI , 2012, ICSI.

[3]  Antonio Concilio,et al.  Design and Functional Test of a Morphing High-Lift Device for a Regional Aircraft , 2011 .

[4]  Chin-Chen Chang,et al.  Single Bitmap Block Truncation Coding of Color Images Using Cat Swarm Optimization , 2013, Recent Advances in Information Hiding and Applications.

[5]  Ce´dric Liauzun.  Aeroelastic Response to Gust Using CFD Techniques , 2010 .

[6]  Ruxandra Botez,et al.  Aerodynamic performance improvement of the UAS-S4 Éhecatl morphing airfoil using novel optimization techniques , 2016 .

[7]  Ernie Havens,et al.  Adaptive wing structures , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[8]  Ruxandra Botez,et al.  New altitude optimisation algorithm for the flight management system CMA-9000 improvement on the A310 and L-1011 aircraft , 2013 .

[9]  Ruxandra Botez,et al.  New Methodology for Wind Tunnel Calibration Using Neural Networks - EGD Approach , 2013 .

[10]  Daniel J. Inman,et al.  Design and Wind-Tunnel Analysis of a Fully Adaptive Aircraft Configuration , 2004 .

[11]  Ruxandra Botez,et al.  Optimization of an Unmanned Aerial System' Wing Using a Flexible Skin Morphing Wing , 2013 .

[12]  Peifeng Li,et al.  Aerodynamic design methodology for blended wing body transport , 2012 .

[13]  Eric Laurendeau,et al.  Design of adaptive transonic laminar airfoils using the γ-Re˜θt transition model , 2015 .

[14]  Mark Drela,et al.  Implicit Implementation of the Full e^n Transition Criterion , 2003 .

[15]  Ruxandra Botez,et al.  Horizontal flight trajectories optimisation for commercial aircraft through a flight management system , 2014 .

[16]  Ruxandra Botez,et al.  Closed-loop control validation of a morphing wing using wind tunnel tests , 2010 .

[17]  Afzal Suleman,et al.  Aero-structural Design Optimization of a Morphing Wingtip , 2011 .

[18]  Holger Hanselka,et al.  Development and design of flexible Fowler flaps for an adaptive wing , 1998, Smart Structures.

[19]  T. L. Grigorie,et al.  Design and experimental validation of a control system for a morphing wing , 2012 .

[20]  Ruxandra Botez,et al.  Laminar flow control on a research wing - project presentation on a three years period , 2007 .

[21]  Rosario Pecora,et al.  Effectiveness of Wing Twist Morphing in Roll Control , 2012 .

[22]  Rosario Pecora,et al.  Multi-parametric flutter analysis of a morphing wing trailing edge , 2014, The Aeronautical Journal (1968).

[23]  Ganapati Panda,et al.  Efficient prediction of stock market indices using adaptive bacterial foraging optimization (ABFO) and BFO based techniques , 2009, Expert Syst. Appl..

[24]  Teodor Lucian Grigorie,et al.  Drag reduction by improving laminar flows past morphing configurations , 2009 .

[25]  Ruxandra Botez,et al.  Numerical and experimental validation of a morphed wing geometry using Price-Païdoussis wind-tunnel testing* , 2016, The Aeronautical Journal.

[26]  Ruxandra Botez,et al.  A new morphing mechanism for a wing using smart actuators controlled by a self-tuning fuzzy logic controller , 2011 .

[27]  Xiongqing Yu,et al.  Aerodynamic/Stealthy/Structural Multidisciplinary Design Optimization of Unmanned Combat Air Vehicle , 2009 .

[28]  Oliviu Sugar Gabor,et al.  Low-speed aerodynamic characteristics improvement of ATR 42 airfoil using a morphing wing approach , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[29]  Ruxandra Botez,et al.  Real Time Morphing Wing Optimization Validation Using Wind-Tunnel Tests , 2010 .

[30]  Prasobchok Poonsong,et al.  Design and Analysis of a Multi-Section Variable Camber Wing , 2004 .

[31]  Ruxandra Botez,et al.  New methodology for calculating flight parameters with neural network - EGD method , 2013 .

[32]  Nebojsa Bacanin.  Implementation and performance of an object-oriented software system for cuckoo search algorithm , .

[33]  Yi Liu,et al.  Static aeroelastic analysis of very flexible wings based on non-planar vortex lattice method , 2013 .

[34]  Ruxandra Botez,et al.  Improving the UAS-S4 Éhecal airfoil high angles-of-attack performance characteristics using a morphing wing approach , 2016 .

[35]  Teodor Lucian Grigorie,et al.  A hybrid fuzzy logic proportional-integral-derivative and conventional on-off controller for morphing wing actuation using shape memory alloy Part 1: Morphing system mechanisms and controller architecture design , 2012, The Aeronautical Journal (1968).

[36]  Andreea Koreanschi,et al.  Numerical optimization of the UAS-S4 Éhecatl airfoil using a morphing wing approach , 2014 .

[37]  Ruxandra Botez,et al.  Application of a Morphing Wing Technology on Hydra Technologies Unmanned Aerial System UAS-S4 , 2014 .

[38]  J. Vale,et al.  Optimization of a Morphing Wing Based on Coupled Aerodynamic and Structural Constraints , 2007 .