Effect of input current modes on intermetallic layer and mechanical property of aluminum–steel lap joint obtained by gas metal arc welding

[1]  T. Nishida,et al.  Partitioning evaluation of mechanical properties and the interfacial microstructure in a friction stir welded aluminum alloy/stainless steel lap joint , 2012 .

[2]  Jiakun Liu,et al.  Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process , 2011 .

[3]  J. F. Santos,et al.  Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys , 2011 .

[4]  K. P. Rao,et al.  Study on laser welding-brazing of zinc coated steel to aluminum alloy with a zinc based filler , 2011 .

[5]  B. Criqui,et al.  Intermetallic compounds in Al 6016/IF-steel friction stir spot welds , 2010 .

[6]  Chao Yang,et al.  Brazability of dissimilar metals tungsten inert gas butt welding-brazing between aluminum alloy and stainless steel with Al-Cu filler metal , 2010 .

[7]  Jerry E. Gould,et al.  Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel: Properties and microstructural characterization , 2010 .

[8]  Chunli Yang,et al.  Effects of Si additions on intermetallic compound layer of aluminum–steel TIG welding–brazing joint , 2009 .

[9]  Chunli Yang,et al.  Metallurgical and mechanical investigations of aluminium-steel butt joint made by tungsten inert gas welding–brazing , 2009 .

[10]  A. Fuji,et al.  Joining phenomena and joint strength of friction welded joint between aluminium–magnesium alloy (AA5052) and low carbon steel , 2009 .

[11]  Ranfeng Qiu,et al.  Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate , 2009 .

[12]  Dheerendra Kumar Dwivedi,et al.  Thin sheet welding of Al 6082 alloy by AC pulse-GMA and AC wave pulse-GMA welding , 2009 .

[13]  P. He,et al.  Interfacial phenomena of cold metal transfer (CMT) welding of zinc coated steel and wrought aluminium , 2008 .

[14]  T. Yakou,et al.  Effects of Heat Treatment Conditions on Formation of Fe–Al Alloy Layer during High Temperature Aluminizing , 2007 .

[15]  M. Kajihara,et al.  Growth behavior of Fe2Al5 during reactive diffusion between Fe and Al at solid-state temperatures , 2007 .

[16]  Jürgen Bruckner,et al.  Intermetallic FexAly-phases in a steel/Al-alloy fusion weld , 2007 .

[17]  Seung-Boo Jung,et al.  Interfacial reaction in steel–aluminum joints made by friction stir welding , 2006 .

[18]  M. Kajihara.  Quantitative Evaluation of Interdiffusion in Fe2Al5 during Reactive Diffusion in the Binary Fe-Al System , 2006 .

[19]  A. Scotti,et al.  The influence of double pulse on porosity formation in aluminum GMAW , 2006 .

[20]  A. Bouayad,et al.  Kinetic interactions between solid iron and molten aluminium , 2003 .

[21]  T. Yakou,et al.  Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment , 2002 .

[22]  F. Barbier,et al.  Intermetallic compound layer growth between solid iron and molten aluminium , 1998 .

[23]  V. Contini,et al.  Microstructural evolution of Al–Fe powder mixtures during high-energy ball milling , 1998 .