Numerical approach regarding functional and design optimization for a residential building heating system composed by heat pump and auxiliary

In this paper is presented the physical model and mathematical approach which describe the equation system used in system calibration and design optimization. The system proposed for study is built from heat pump, for energy demand delivery, together with auxiliary heating source to face in all low temperature days, when heat pump work at maximum load but the required demand by the building is higher. The paper present few of the common used systems in market for which the mathematical equation system will be proposed to come in help designers for in simulation and cost optimization. Simulation of proposed design is realized and results are delivered. The system construction, is optimized by comparison study of design and simulation data for each system type proposed. The comparison study is used for cost estimation of system and energy balance.

[1]  Shenghua Zou,et al.  Simplified model for coefficient of performance calculation of surface water source heat pump , 2017 .

[2]  Qiang Lv,et al.  Simulation of heating loads and heat pump loads of a typical suburban residential building of Beijing, China in wintertime , 2018, Energy Procedia.

[3]  Hadi Ghasemi Zavaragh,et al.  A thermodynamic comparison between heat pump and refrigeration device using several refrigerants , 2018, Energy and Buildings.

[4]  Esmaeel Khanmirza,et al.  Predictive control of a building hybrid heating system for energy cost reduction , 2016, Appl. Soft Comput..

[5]  D. Borelli,et al.  Transient numerical modelling and experimental validation of building heating plants , 2018 .

[6]  José M. Corberán,et al.  Optimal sizing of a heat pump booster for sanitary hot water production to maximize benefit for the substitution of gas boilers , 2017 .

[7]  Hyun Chul Kim,et al.  Comparative Analysis Between District Heating and Geothermal Heat Pump System , 2017 .

[8]  Zhenjun Ma,et al.  Model-based Optimization of Ground Source Heat Pump Systems ☆ , 2017 .

[9]  J. New,et al.  Air source integrated heat pump simulation model for EnergyPlus , 2017 .

[10]  Luisa F. Cabeza,et al.  Model Predictive Control Strategy Applied to Different Types of Building for Space Heating , 2018, Thermal Energy Storage with Phase Change Materials.

[11]  M. Baneshi,et al.  Impacts of hot water consumption pattern on optimum sizing and techno-economic aspects of residential hybrid solar water heating systems , 2018, Sustainable Energy Technologies and Assessments.

[12]  Y. Rui,et al.  Modelling ground source heat pump system by an integrated simulation programme , 2018 .

[13]  Agis M. Papadopoulos,et al.  A comparative review of heating systems in EU countries, based on efficiency and fuel cost , 2018, Renewable and Sustainable Energy Reviews.

[14]  Sang Hun Lee,et al.  Simulation-based optimization of heating and cooling seasonal performances of an air-to-air heat pump considering operating and design parameters using genetic algorithm , 2018, Applied Thermal Engineering.

[15]  Alan S. Fung,et al.  Comparative thermal performances of a ground source heat pump and a variable capacity air source heat pump systems for sustainable houses , 2015 .

[16]  Huanxin Chen,et al.  Machine learning-based thermal response time ahead energy demand prediction for building heating systems , 2018, Applied Energy.

[17]  Min-Soo Kim,et al.  The effect of water temperature lift on the performance of cascade heat pump system , 2014 .

[18]  Chris Underwood,et al.  Parametric modelling of domestic air-source heat pumps , 2017 .