Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide

This paper addresses the architecture optimization of a three-degree-of-freedom translational parallel mechanism designed for machining applications. The design optimization is conducted on the basis of a prescribed Cartesian workspace with prescribed kinetostatic performances. The resulting machine, the Orthoglide, features three fixed parallel linear joints which are mounted orthogonally, and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The interesting features of the Orthoglide are a regular Cartesian workspace shape, uniform performances in all directions, and good compactness. A small-scale prototype of the Orthoglide under development is presented at the end of this paper.

[1]  John C. Ziegert,et al.  Fundamental Comparison of the Use of Serial and Parallel Kinematics for Machines Tools , 1999 .

[2]  Jean-Pierre Merlet Determination of 6D Workspaces of Gough-Type Parallel Manipulator and Comparison between Different Geometries , 1999, Int. J. Robotics Res..

[3]  Luc Baron,et al.  The Design of Parallel Manipulators of Star Topology Under Isotropic Constraint , 2001, DAC 2001.

[4]  Tsuneo Yoshikawa,et al.  Manipulability of Robotic Mechanisms , 1985 .

[5]  J. M. Hervé,et al.  Structural synthesis of 'parallel' robots generating spatial translation , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[6]  Beno Benhabib,et al.  Singularity analysis of mechanisms and robots via a velocity-equation model of the instantaneous kinematics , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[7]  François Pierrot Modelling and Preliminary Design Issues of a 3-Axis Parallel Machine-Tool , 2002 .

[8]  Karl-Heinz Wurst,et al.  Systematic Design of Hexapods and other Parallel Link Systems , 1997 .

[9]  Clément Gosselin,et al.  Type synthesis of 3T1R 4-DOF parallel manipulators based on screw theory , 2004, IEEE Transactions on Robotics and Automation.

[10]  Gene H. Golub,et al.  Matrix computations , 1983 .

[11]  Vincenzo Parenti-Castelli,et al.  A Translational 3-dof Parallel Manipulator , 1998 .

[12]  Jorge Angeles,et al.  The direct kinematics of parallel manipulators under joint-sensor redundancy , 2000, IEEE Trans. Robotics Autom..

[13]  Tian Huang,et al.  The Local Dexterity, Optimal Architecture and Design Criteria of Parallel Machine Tools , 1998 .

[14]  Reimund Neugebauer,et al.  Putting Parallel Kinematics Machines (PKM) to Productive Work , 1999 .

[15]  Jorge Angeles,et al.  Kinematic Isotropy and the Optimum Design of Parallel Manipulators , 1997, Int. J. Robotics Res..

[16]  R. Clavel,et al.  A Fast Robot with Parallel Geometry , 1988 .

[17]  John J. Craig,et al.  Articulated hands: Force control and kinematic issues , 1981 .

[18]  J. Kenneth Salisbury,et al.  Articulated Hands , 1982 .

[19]  F. A. Adkins,et al.  Working Capability Analysis of Stewart Platforms , 1996 .

[20]  Marco Carricato,et al.  Singularity-Free Fully-Isotropic Translational Parallel Manipulators , 2002 .

[21]  Han Sung Kim,et al.  Evaluation of a Cartesian Parallel Manipulator , 2002 .

[22]  Wisama Khalil,et al.  Dynamic Modeling of the Orthoglide , 2002 .

[23]  Xianwen Kong,et al.  Type Synthesis of Linear Translational Parallel Manipulators , 2002 .

[24]  Marco Carricato,et al.  Singularity-Free Fully-Isotropic Translational Parallel Mechanisms , 2002, Int. J. Robotics Res..

[25]  L. Tsai,et al.  Kinematics and Optimization of a Spatial 3-UPU Parallel Manipulator , 2000 .