Commanded Motion Optimization to Reduce Residual Vibration

[1]  Warren P. Seering,et al.  INPUT SHAPING FOR VIBRATION REDUCTION WITH SPECIFIED INSENSITIVITY TO MODELING ERRORS , 1996 .

[2]  William Singhose,et al.  Vibration Reduction Using Multi-Hump Input Shapers , 1997 .

[3]  Alistair B. Forbes,et al.  The GUM, Bayesian inference and the observation and measurement equations. , 2011 .

[4]  M. Olsson.  Finite element, modal co-ordinate analysis of structures subjected to moving loads , 1985 .

[5]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[6]  Aurelio Piazzi,et al.  Minimum-time system-inversion-based motion planning for residual vibration reduction , 2000 .

[7]  Luca Consolini,et al.  Generalized bang-bang control for feedforward constrained regulation , 2006, Proceedings of the 45th IEEE Conference on Decision and Control.

[8]  P. H. Meckl,et al.  Active Damping in a Three-Axis Robotic Manipulator , 1985 .

[9]  Forrest W. Flocker.  Controlling the Frequency Content of Inertia Forces in Dwelling Cam-Follower Systems , 2007 .

[10]  William E. Singhose,et al.  Reduced-modification input shapers for manually controlled systems with flexibility , 2014, 2014 American Control Conference.

[11]  N. Berzak,et al.  Optimization of Cam-Follower Systems With Kinematic and Dynamic Constraints , 1982 .

[12]  William Singhose,et al.  Performance studies of human operators driving double-pendulum bridge cranes , 2010 .

[13]  Ferdinand Freudenstein,et al.  The Development of a Predictive Model for the Optimization of High-Speed Cam-Follower Systems with Coulomb Damping Internal Friction and Elastic and Fluidic Elements , 1986 .

[14]  Patrick Keogh,et al.  The vibration control of speed-dependent flexible rotor/magnetic bearing systems using linear matrix inequality gain-scheduled H∞ design , 2008 .

[15]  Nikos A. Aspragathos,et al.  A linear differential formulation of friction forces for adaptive estimator algorithms , 2001, Robotica.

[16]  William Singhose,et al.  Command shaping for flexible systems: A review of the first 50 years , 2009 .

[17]  Warren P. Seering,et al.  Residual Vibration Reduction Using Vector Diagrams to Generate Shaped Inputs , 1994 .

[18]  Alberto Borboni,et al.  A Genetic Algorithm as Support in the Movement Optimisation of a Redundant Serial Robot , 2006 .

[19]  Usik Lee,et al.  Dynamics of an axially moving Bernoulli-Euler beam: Spectral element modeling and analysis , 2004 .

[20]  Daniel Simões Lopes,et al.  Tangent vectors to a 3-D surface normal: A geometric tool to find orthogonal vectors based on the Householder transformation , 2013, Comput. Aided Des..

[21]  Sudarshan P. Bhat,et al.  Precise Point-to-Point Positioning Control of Flexible Structures , 1990 .

[22]  D. M. Aspinwall.  Acceleration Profiles for Minimizing Residual Response , 1979 .

[23]  Ferdinand Freudenstein.  On the dynamics of high-speed cam profiles , 1960 .

[24]  Masayoshi Tomizuka,et al.  Feedforward Input Generation Based on Neural Network Prediction in Multi-Joint Robots , 2014 .