High-Efficiency Power Amplifier Employing Minimum-Power Harmonic Active Load Modulator

There is an impedance conflict between the fundamental harmonic of <inline-formula> <tex-math notation="LaTeX">${f}_{2}$ </tex-math></inline-formula> and the second of <inline-formula> <tex-math notation="LaTeX">${f}_{1}$ </tex-math></inline-formula> if <inline-formula> <tex-math notation="LaTeX">${f}_{2}\,\,{=}\,\,{2}{f}_{1}$ </tex-math></inline-formula>. In this brief, a methodology employing the harmonic active load modulation (HALM) technique is utilized for solving this problem. A main power amplifier and an active load modulator constitute the overall circuit. This technique transforms the second harmonic load impedance to the optimum by injecting second harmonic power in the lower band. In order to improve the overall efficiency, a method of searching optimal location parameter is proposed to achieve the minimum extra power in harmonic injection. A power amplifier (PA) working at 1.7 and 3.4 GHz is fabricated for validation. At 1.7 GHz, the HALM technique brings an improvement of 14% in overall efficiency and an increase of 0.7 dB in output power. As for 3.4 GHz, the fabricated PA delivers overall efficiency of 78.5% and output power of 41.3 dBm without HALM.

[1]  Songbai He,et al.  1.7/2.6 GHz high-efficiency concurrent dual-band power amplifier with dual-band harmonic wave controlled transformer , 2014 .

[2]  J. Lees,et al.  On the Continuity of High Efficiency Modes in Linear RF Power Amplifiers , 2009, IEEE Microwave and Wireless Components Letters.

[3]  Jun Peng,et al.  A Novel Design of Concurrent Dual-Band High Efficiency Power Amplifiers With Harmonic Control Circuits , 2016, IEEE Microwave and Wireless Components Letters.

[4]  Hai-Peng Fu,et al.  Two-Stage High-Efficiency Concurrent Dual-Band Harmonic-Tuned Power Amplifier , 2016, IEEE Transactions on Microwave Theory and Techniques.

[5]  P. J. Tasker,et al.  Wide band high-efficiency power amplifier design , 2011, 2011 6th European Microwave Integrated Circuit Conference.

[6]  F. Raab Maximum efficiency and output of class-F power amplifiers , 2001 .

[7]  S. C. Cripps,et al.  RF Power Amplifiers for Wireless Communications , 1999 .

[8]  Fadhel M. Ghannouchi,et al.  Enhanced Analysis and Design Method of Concurrent Dual-Band Power Amplifiers With Intermodulation Impedance Tuning , 2013, IEEE Transactions on Microwave Theory and Techniques.

[9]  Weimin Shi,et al.  Design of Broadband Power Amplifiers Based on Resistive-Reactive Series of Continuous Modes , 2016, IEEE Microwave and Wireless Components Letters.

[10]  Amirreza Alizadeh,et al.  Class-J2 Power Amplifiers , 2017, IEEE Transactions on Circuits and Systems I: Regular Papers.

[11]  Mincheol Seo,et al.  High-Efficiency Power Amplifier Using an Active Second-Harmonic Injection Technique Under Optimized Third-Harmonic Termination , 2014, IEEE Transactions on Circuits and Systems II: Express Briefs.

[12]  Qinghua Tang,et al.  Over Second Octave Power Amplifier Design Based on Resistive–Resistive Series of Continuous Class-F/F−1 Modes , 2017, IEEE Microwave and Wireless Components Letters.

[13]  Fadhel M. Ghannouchi,et al.  Sequential Load-Pull Technique for Multioctave Design of RF Power Amplifiers , 2016, IEEE Transactions on Circuits and Systems II: Express Briefs.