A new combined experimental–numerical approach to evaluate formability of rate dependent materials

Abstract Regardless of their forms and variations, mechanical stretching tests have been extensively used to generate material forming limit curves that we rely on for designing and executing sheet metal forming operations. Yet the fact that they are typically performed at constant speeds presents a major obstacle in characterising formability limits for rate dependent materials such as lightweight alloys formed at elevated temperatures. In this work, a new hybrid numerical/experimental approach is presented that can be used to construct forming limit diagrams under specified strain rate loading paths in mechanical stretching tests. A new algorithm, coupled with a calibrated constitutive material model, is incorporated into a commercial FE package to control the speed of the deformation according to the desired strain rate loading paths. Simulations are carried out on AZ31 magnesium alloy at selected conditions, while undergoing mechanical stretching according to the Nakazima method. The simulation results are experimentally verified through a set of interrupted tests using several specimen geometries that cover a wide range of biaxial strain ratios. The outcome of this study provides the basis for constructing complete forming limit diagrams that can be accurately assigned to a specific strain rate value.

[1]  E. Doege,et al.  Sheet metal forming of magnesium wrought alloys — formability and process technology , 2001 .

[2]  Amit K. Ghosh,et al.  Biaxial warm forming behavior of aluminum sheet alloys , 2003 .

[3]  Marwan K. Khraisheh,et al.  Limiting strains of sheet metals obtained by pneumatic stretching at elevated temperatures , 2008 .

[4]  B. Mordike,et al.  Magnesium: Properties — applications — potential , 2001 .

[5]  Quan Situ,et al.  Determination of forming limit diagrams of sheet materials with a hybrid experimental–numerical approach , 2011 .

[6]  K. I. Johnson,et al.  Deformation modeling of superplastic AA-5083 , 1998 .

[7]  Manfred Geiger,et al.  Determination of forming limit diagrams – a new analysis method for characterization of materials' formability , 2003 .

[8]  Ravi Verma,et al.  Quick Plastic Forming of a Decklid Inner Panel with Commercial AZ31 Magnesium Sheet , 2006 .

[9]  Taylan Altan,et al.  Sheet metal forming at elevated temperatures , 2006 .

[10]  L. Hector,et al.  The effect of stress state on high-temperature deformation of fine-grained aluminum-magnesium alloy AA5083 sheet , 2009 .

[11]  K. Weinmann,et al.  Design and experimental validation of a two-stage superplastic forming die , 2009 .

[12]  Tetsuo Naka,et al.  The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum-magnesium alloy sheet , 2001 .

[13]  Z. Marciniak,et al.  Limit strains in the processes of stretch-forming sheet metal , 1967 .

[14]  S. Agnew,et al.  A Mechanistic Understanding of the Formability of Magnesium: Examining the Role of Temperature on the Deformation Mechanisms , 2003 .

[15]  M. Khraisheh,et al.  Analysis of Superplastic Deformation of AZ31 Magnesium Alloy , 2007 .

[16]  John E. Carsley,et al.  Development of Forming Limit Diagrams of Aluminum and Magnesium Sheet Alloys at Elevated Temperatures , 2008 .

[18]  F. K. Abu-Farha,et al.  Simulation of High-Temperature AA5083 Bulge Forming with a Hardening/Softening Material Model , 2009, Journal of Materials Engineering and Performance.

[19]  L. Hector,et al.  Material Models for Simulation of Superplastic Mg Alloy Sheet Forming , 2010 .