An 80 mV Startup Dual-Mode Boost Converter by Charge-Pumped Pulse Generator and Threshold Voltage Tuned Oscillator With Hot Carrier Injection

This paper presents an 80 mV startup-voltage dual-mode boost converter for energy harvesting applications. The charge-pumped pulse generator enables a startup operation of the boost converter from the input voltage of 80 mV. The threshold voltage tuned oscillator for the clock generator of the boost converter compensates for the die-to-die process variation by a hot carrier injection (HCI), thereby reducing the minimum operation voltage (VDDMIN) of the clock generator by 45% with a trimming time of 10 minutes. The proposed step-up converter achieves the lowest startup voltage without using a mechanical switch or a large transformer.

[1]  Takayasu Sakurai,et al.  A 80-mV input, fast startup dual-mode boost converter with charge-pumped pulse generator for energy harvesting , 2011, IEEE Asian Solid-State Circuits Conference 2011.

[2]  Vijay K. Bhargava,et al.  Wireless sensor networks with energy harvesting technologies: a game-theoretic approach to optimal energy management , 2007, IEEE Wireless Communications.

[3]  Chris Van Hoof,et al.  Integrated capacitive power-management circuit for thermal harvesters with output power 10 to 1000µW , 2009, 2009 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[4]  J. F. Dickson,et al.  On-chip high-voltage generation in MNOS integrated circuits using an improved voltage multiplier technique , 1976 .

[5]  Takayasu Sakurai,et al.  A 95mV-startup step-up converter with Vth-tuned oscillator by fixed-charge programming and capacitor pass-on scheme , 2011, 2011 IEEE International Solid-State Circuits Conference.

[6]  Anantha Chandrakasan,et al.  A Battery-Less Thermoelectric Energy Harvesting Interface Circuit With 35 mV Startup Voltage , 2010, IEEE Journal of Solid-State Circuits.

[7]  J. M. Damaschke,et al.  Design of a low input voltage converter for thermoelectric generator , 1996, Proceedings of Applied Power Electronics Conference. APEC '96.

[8]  K. Strunz,et al.  20mV input boost converter for thermoelectric energy harvesting , 2009, 2009 Symposium on VLSI Circuits.

[9]  Kai Strunz,et al.  A 20 mV Input Boost Converter With Efficient Digital Control for Thermoelectric Energy Harvesting , 2010, IEEE Journal of Solid-State Circuits.

[10]  Xiao Bo Wu,et al.  Subthreshold voltage startup module for stepup DC-DC converter , 2010 .

[11]  Koichi Ishida,et al.  Startup Techniques for 95 mV Step-Up Converter by Capacitor Pass-On Scheme and ${\rm V}_{\rm TH}$-Tuned Oscillator With Fixed Charge Programming , 2012, IEEE Journal of Solid-State Circuits.

[12]  S. Takayasu,et al.  0.18-V Input Charge Pump with Forward Body Biasing in Startup Circuit using 65nm CMOS , 2010 .

[13]  J. M. Damaschke.  Design of a low-input-voltage converter for thermoelectric generator , 1997 .

[14]  Sanjib Kumar Panda,et al.  Energy Harvesting From Hybrid Indoor Ambient Light and Thermal Energy Sources for Enhanced Performance of Wireless Sensor Nodes , 2011, IEEE Transactions on Industrial Electronics.

[15]  Cesare Alippi,et al.  An Adaptive System for Optimal Solar Energy Harvesting in Wireless Sensor Network Nodes , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.