RF MEMS phase shifters: design and applications

Recent results obtained with MEMS phase shifters demonstrate that their performance is much better than GaAs phase shifters using either standard (switched-line, reflect-line) or distributed designs. The reliability of MEMS phase shifters is worse than of single switches since they employ 8-16 MEMS switches and do not tolerate a failure in any of the switches. On the other hand, a large phased array will still function properly, albeit with a slightly decreased efficiency and higher sidelobes if 3-4% of the phase shifters fail. Currently, the failure mechanisms of MEMS switches are being investigated and will greatly benefit the reliability of MEMS phase shifters. Also, the hermetic packaging of MEMS phase shifters is not straightforward, due to their relatively large size. It is for these reasons that the authors believe that MEMS phase shifters will be mostly used in satellite and defense applications in the next five years.

[1]  Robert A. York,et al.  Distributed analog phase shifters with low insertion loss , 1999 .

[2]  G.M. Rebeiz,et al.  2 and 4-bit DC-18 GHz microstrip MEMS distributed phase shifters , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[3]  Gabriel M. Rebeiz,et al.  RF MEMS switches and switch circuits , 2001 .

[4]  Charles L. Goldsmith,et al.  X-band RF MEMS phase shifters for phased array applications , 1999 .

[5]  S. Eshelman,et al.  Performance of low-loss RF MEMS capacitive switches , 1998 .

[6]  R. Mihailovich,et al.  A DC-to-40 GHz four-bit RF MEMS true-time delay network , 2001, IEEE Microwave and Wireless Components Letters.

[7]  Yong-Kweon Kim,et al.  V-band 2-b and 4-b low-loss and low-voltage distributed MEMS digital phase shifter using metal-air-metal capacitors , 2002, IMS 2002.

[8]  G.M. Rebeiz,et al.  A very-low-loss 2-bit X-band RF MEMS phase shifter , 2002, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278).

[9]  J.A. Higgins,et al.  MEM relay for reconfigurable RF circuits , 2001, IEEE Microwave and Wireless Components Letters.

[10]  J. Wallace,et al.  Low cost MMIC DBS chip sets for phased array applications , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[11]  Charles F. Campbell,et al.  A compact 5-bit phase shifter MMIC for K-band satellite communication systems , 2000, IMS 2000.

[12]  B. Pillans,et al.  Ka-band RF MEMS phase shifters , 1999 .

[13]  K. Maruhashi,et al.  A Ka-band 4-bit monolithic phase shifter using unresonated FET switches , 1998, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192).

[14]  M. J. Schindler,et al.  A 3 bit K/Ka band MMIC phase shifter , 1988, IEEE 1988 Microwave and Millimeter-Wave Monolithic Circuits Symposium. Digest of Papers..

[15]  S. Duffy,et al.  MEMS microswitches for reconfigurable microwave circuitry , 2001, IEEE Microwave and Wireless Components Letters.

[16]  Yu Liu,et al.  K-band 3-bit low-loss distributed MEMS phase shifter , 2000 .

[17]  G.M. Rebeiz,et al.  A low-loss Ka-band distributed MEMS 2-bit phase shifter using metal-air-metal capacitors , 2002, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278).

[18]  Gabriel M. Rebeiz,et al.  Optimization of distributed MEMS transmission-line phase shifters-U-band and W-band designs , 2000 .