Thermodynamic and economic study and cost comparison for different heating systems to control the visible plume from wet cooling towers

SYNOPSIS This communication presents a case study on the thermodynamic and economic considerations of the control of the visible plume from wet cooling towers of a commercial building. Detailed thermodynamic and economic studies for various cases have been carried out and compared for different costs, taking other constraints into account. The total power consumption first decreases and then increases while the power consumption in the chillers decreases, whereas the COP of the chillers increases as the number of cooling towers increases. On the other hand, the power consumption in the fan solely depends on the mode and operation of the cooling towers. It is found that all costs are much lower for a solar collector system followed by an electric heat pump system, and then a biogas plant and finally a geothermal heat pump system, while all costs are found to be highest in the case of an air cooled geothermal heat pump system. Detailed comparison among various systems is also given for different cases.

[1]  J. W. Sutherland,et al.  Analysis of Mechanical-Draught Counterflow Air/Water Cooling Towers , 1983 .

[2]  Detlev G. Kröger,et al.  A critical investigation into the heat and mass transfer analysis of counterflow wet-cooling towers , 2005 .

[3]  K.Jatinder Singh,et al.  Comparative study of economics of different models of family size biogas plants for state of Punjab, India. , 2004 .

[4]  J. C. Kloppers,et al.  The Lewis factor and its influence on the performance prediction of wet-cooling towers , 2005 .

[5]  Michael Bennett,et al.  An analysis of lidar measurements of buoyant plume rise and dispersion at five power stations , 1992 .

[6]  A R Winter.  Control of visible plumes from cooling towers , 1997 .

[7]  B E A Fisher,et al.  Predicting cooling tower plume dispersion , 1997 .

[8]  Ennio Antonio Carnevale,et al.  Environmental impact from wet plumes in combined-cycle power plants , 1998 .

[9]  John Burnett,et al.  Mechanistic model of centrifugal chillers for HVAC system dynamics simulation , 2000 .

[10]  M Lees.  The Economics of Wet Versus Dry Cooling for Combined Cycle , 1995 .

[11]  Michel Bernier,et al.  COOLING TOWER PERFORMANCE: THEORY AND EXPERIMENTS , 1994 .

[12]  Wladyslaw Kowalski.  Systems and Equipment , 2009 .

[13]  Paisarn Naphon,et al.  Study on the heat transfer characteristics of an evaporative cooling tower , 2005 .

[14]  Detlev G. Kro¨ger,et al.  Cooling tower performance evaluation: Merkel, Poppe, and e-NTU methods of analysis , 2005 .

[15]  D. Baker,et al.  a comprehensive approach to the analysis of cooling tower performance , 1961 .

[16]  W. K. Lewis,et al.  The Evaporation of a Liquid Into a Gas , 1922, Transactions of the American Society of Mechanical Engineers.

[17]  J. Braun.  Methodologies for the Design and Control of Central Cooling Plants , 1988 .