Higher-order non-linear analysis of steel structures.Part I : elastic second-order formulation

This paper presents a higher-order beam-column formulation that can capture the geometrically non-linear behaviour of steel framed structures which contain a multiplicity of slender members. Despite advances in computational structural frame software, analyses of large frames can still be problematic from a numerical standpoint, with efficacious and reliable convergence not always being ensured. To this end, the intent of this paper is to fulfil a need for versatile, reliable and efficient non-linear analysis of general steel framed structures with a large number of members suitable for engineering practice. Following a comprehensive review of numerical frame analysis techniques, a fourth-order element is derived, in which the crucial member bowing effect involved in the equilibrium equation is captured, and implemented in an updated Lagrangian formulation. Because of this, it is able to predict flexural buckling, snap-through buckling and the large displacement post-buckling behaviour of typical structures whose responses have been reported by independent researchers. The present approach with its efficacious and reliable convergence is shown in comparison studies to be applicable to selected applications which are prone to several forms of geometric non-linearity.

[1]  F. W. Williams,et al.  AN APPROACH TO THE NON-LINEAR BEHAVIOUR OF THE MEMBERS OF A RIGID JOINTED PLANE FRAMEWORK WITH FINITE DEFLECTIONS , 1964 .

[2]  Xiao Xiong Zha,et al.  Nonlinear pre-fire and post-fire analysis of steel frames , 2005 .

[3]  J. Y. R. Liew,et al.  ADVANCED ANALYSIS FOR PERFORMANCE-BASED DESIGN OF STEEL STRUCTURES EXPOSED TO FIRES , 2002 .

[4]  Andrew Kwok Wai So,et al.  Buckling and geometrically nonlinear analysis of frames using one element/member , 1991 .

[5]  Hong Chen,et al.  EXPLOSION AND FIRE ANALYSIS OF STEEL FRAMES USING FIBER ELEMENT APPROACH , 2004 .

[6]  Siu-Lai Chan,et al.  A refined finite element formulation for flexural and torsional buckling of beam-columns with finite rotations , 2005 .

[7]  Mark A. Bradford,et al.  In-Plane Elastic Stability of Arches under a Central Concentrated Load , 2002 .

[8]  W. F. Chen,et al.  Elastic-Plastic Large Displacement Analysis of Pipes , 1981 .

[9]  J. L. Meek,et al.  Geometrically nonlinear analysis of space frames by an incremental iterative technique , 1984 .

[10]  K. E. Bisshopp,et al.  Large deflection of cantilever beams , 1945 .

[11]  Manolis Papadrakakis,et al.  Post-buckling analysis of spatial structures by vector iteration methods , 1981 .

[12]  W. F. Chen,et al.  Improved nonlinear plastic hinge analysis of space frame structures , 2000 .

[13]  Siu Lai Chan,et al.  SECOND-ORDER ELASTIC ANALYSIS OF FRAMES USING SINGLE IMPERFECT ELEMENT PER MEMBER , 1995 .

[14]  R. Wen,et al.  Nonlinear Elastic Frame Analysis by Finite Element , 1983 .

[15]  C. Oran.  Tangent Stiffness in Plane Frames , 1973 .

[16]  Zhi Hua Zhou,et al.  Pointwise Equilibrating Polynomial Element for Nonlinear Analysis of Frames , 1994 .

[17]  R. D. Wood,et al.  GEOMETRICALLY NONLINEAR FINITE ELEMENT ANALYSIS OF BEAMS, FRAMES, ARCHES AND AXISYMMETRIC SHELLS , 1977 .

[18]  Raymond H. Plaut,et al.  Stability of Lattice Structures Under Combined Loads , 1980 .

[19]  Lagrange,et al.  SNAP-THROUGH BUCKLING OF RETICULATED SHELLS. , 1975 .

[20]  Jerome J. Connor,et al.  Geometrically Nonlinear Finite-Element Analysis , 1969 .

[21]  C. K. Iu,et al.  A simulation-based large deflection and inelastic analysis of steel frames under fire , 2004 .