Cooling Performance Characteristics of the Stack Thermal Management System for Fuel Cell Electric Vehicles under Actual Driving Conditions

The cooling performance of the stack radiator of a fuel cell electric vehicle was evaluated under various actual road driving conditions, such as highway and uphill travel. The thermal stability was then optimized, thereby ensuring stable operation of the stack thermal management system. The coolant inlet temperature of the radiator in the highway mode was lower than that associated with the uphill mode because the corresponding frontal air velocity was higher than obtained in the uphill mode. In both the highway and uphill modes, the coolant temperatures of the radiator, operated under actual road driving conditions, were lower than the allowable limit (80 °C); this is the maximum temperature at which stable operation of the stack thermal management system of the fuel cell electric vehicle could be maintained. Furthermore, under actual road driving conditions in uphill mode, the initial temperature difference (ITD) between the coolant temperature and air temperature of the system was higher than that associated with the highway mode; this higher ITD occurred even though the thermal load of the system in uphill mode was greater than that corresponding to the highway mode. Since the coolant inlet temperature is expected to exceed the allowable limit (80 °C) in uphill mode under higher ambient temperature with air conditioning system operation, the FEM design layout should be modified to improve the heat capacity. In addition, the overall volume of the stack cooling radiator is 52.2% higher than that of the present model and the coolant inlet temperature of the improved radiator is 22.7% lower than that of the present model.

[1]  Jong-Phil Won,et al.  Heating performance characteristics of stack coolant source heat pump using R744 for fuel cell electric vehicles , 2012 .

[2]  J. Hager,et al.  Fuel cell vehicle thermal management system simulation in contrast to conventional vehicle concepts , 2005 .

[3]  Moo-Yeon Lee,et al.  Performance Evaluation of an In-Wheel Motor Cooling System in an Electric Vehicle/Hybrid Electric Vehicle , 2014 .

[4]  Dong-Yeon Lee,et al.  Review on Conventional Air Conditioning, Alternative Refrigerants, and CO2 Heat Pumps for Vehicles , 2013 .

[5]  J. Andrews,et al.  The potential of using nanofluids in PEM fuel cell cooling systems: A review , 2015 .

[6]  S. Kandlikar,et al.  Thermal management issues in a PEMFC stack – A brief review of current status , 2009 .

[7]  S. C. Kim,et al.  Performance characteristics of a supplementary stack-cooling system for fuel-cell vehicles using a carbon dioxide air-conditioning unit , 2010 .

[8]  Min-Soo Kim,et al.  Performance evaluation of a stack cooling system using CO2 air conditioner in fuel cell vehicles , 2009 .

[9]  S. Kandlikar,et al.  A critical review of cooling techniques in proton exchange membrane fuel cell stacks , 2012 .

[10]  Moo-Yeon Lee,et al.  Cooling Performance Characteristics on Mobile Air-Conditioning System for Hybrid Electric Vehicles , 2013 .

[11]  David A. Masten,et al.  PEM Fuel Cell System Solutions for Transportation , 2000 .

[12]  Min-Soo Kim,et al.  Heating performance enhancement of a CO2 heat pump system recovering stack exhaust thermal energy in fuel cell vehicles , 2007 .

[13]  Moo‐Yeon Lee,et al.  Numerical study on the thermal performance characteristics of the stack system for FCEV , 2015 .

[14]  Moo-Yeon Lee,et al.  Characteristic Evaluation on the Cooling Performance of an Electrical Air Conditioning System Using R744 for a Fuel Cell Electric Vehicle , 2012 .

[15]  J. Andrews,et al.  An experimental investigation of a PEM fuel cell to supply both heat and power in a solar-hydrogen RAPS system , 2011 .