Corrective frequency compensation for parasitics in boost power converter with sensorless current mode control

Abstract For boost power converter with Sensorless Current Mode (SCM) control, the inductor current is acquired by current estimator instead of current sensing. Without consideration of parasitics, the estimator is low-accurate, which affects system Small Signal Model (SSM) and degrades the control performance. In this paper, the issue is studied in frequency domain, and solved by a Corrective Frequency Compensation for Parasitics (CFCP) strategy. First, transfer functions for power converter, current estimator and current mode controller are given for frequency-domain analysis. Second, without consideration of parasitics, conventional proportional integral compensation is used to improve the system stability. Furthermore, with consideration of parasitics, converter main pole is replaced by two poles while a zero emerges at the origin. In order to cancel out the influence, the proposed CFCP strategy adopts a second-order transfer function to correct zero/pole variation induced by parasitics. Finally, steady state performance and transient response of the converter are improved, which are verified by simulations and experiments.

[1]  Thillainathan Logenthiran,et al.  Analysis and compensation of voltage unbalance of a DFIG using predictive rotor current control , 2016 .

[2]  María Isabel Milanés-Montero,et al.  Hall-Effect Based Semi-Fast AC On-Board Charging Equipment for Electric Vehicles , 2011, Sensors.

[3]  Paolo Mattavelli,et al.  Small-Signal Analysis and Optimal Design of External Ramp for Constant On-Time V $^{\bf 2}$ Control With Multilayer Ceramic Caps , 2014, IEEE Transactions on Power Electronics.

[4]  Kai Yu,et al.  Digital Sensorless Current Mode Control Based on Charge Balance Principle and Dual Current Error Compensation for DC–DC Converters in DCM , 2016, IEEE Transactions on Industrial Electronics.

[5]  Xiangning He,et al.  Asymmetry Three-Level Gird-Connected Current Hysteresis Control With Varying Bus Voltage and Virtual Oversample Method , 2014, IEEE Transactions on Power Electronics.

[6]  Qiaoling Tong,et al.  Multiloop Minimum Switching Cycle Control Based on Nonaveraged Current Discrete-Time Model for Buck Converter , 2017, IEEE Transactions on Power Electronics.

[7]  Zhenyu Zhao,et al.  Sensorless Self-Tuning Digital CPM Controller With Multiple Parameter Estimation and Thermal Stress Equalization , 2011, IEEE Transactions on Power Electronics.

[8]  Qiaoling Tong,et al.  Sensorless Predictive Current Controlled DC–DC Converter With a Self-Correction Differential Current Observer , 2014, IEEE Transactions on Industrial Electronics.

[9]  S. Ziegler,et al.  Current Sensing Techniques: A Review , 2009, IEEE Sensors Journal.

[10]  Carlos Aguilar,et al.  A Simple Sensorless Current Sharing Technique for Multiphase DC–DC Buck Converters , 2017, IEEE Transactions on Power Electronics.

[11]  Jaber A. Abu-Qahouq,et al.  Power Converter With Digital Sensorless Adaptive Voltage Positioning Control Scheme , 2011, IEEE Transactions on Industrial Electronics.

[12]  Chien-Hung Tsai,et al.  Switching Frequency Stabilization Techniques for Adaptive On-Time Controlled Buck Converter With Adaptive Voltage Positioning Mechanism , 2016, IEEE Transactions on Power Electronics.

[13]  Hao Min,et al.  Predictive Digital Current Control of Single-Inductor Multiple-Output Converters in CCM With Low Cross Regulation , 2012, IEEE Transactions on Power Electronics.

[14]  Fred C. Lee,et al.  Unified Equivalent Circuit Model and Optimal Design of $V^{2}$ Controlled Buck Converters , 2016, IEEE Transactions on Power Electronics.

[15]  Wenping Cao,et al.  Design of a Modular, High Step-Up Ratio DC–DC Converter for HVDC Applications Integrating Offshore Wind Power , 2016, IEEE Transactions on Industrial Electronics.

[16]  Yen-Shin Lai,et al.  Predictive Digital-Controlled Converter With Peak Current-Mode Control and Leading-Edge Modulation , 2009, IEEE Transactions on Industrial Electronics.

[17]  Weidong Zhang,et al.  An adaptive sliding-mode observer with a tangent function-based PLL structure for position sensorless PMSM drives , 2017 .

[18]  Igor Papic,et al.  Performance evaluation of the DSP-based improved time-optimal current controller for STATCOM , 2017 .

[19]  Marian K. Kazimierczuk,et al.  Control-to-output transfer function of peak currentmode controlled pulse-width modulated dc–dc buck converter in continuous conduction mode , 2012 .

[20]  Qiaoling Tong,et al.  Sensorless Predictive Peak Current Control for Boost Converter Using Comprehensive Compensation Strategy , 2014, IEEE Transactions on Industrial Electronics.

[21]  Paolo Mattavelli,et al.  Small-Signal Analysis and Optimal Design of Constant Frequency $V^{2}$ Control , 2015, IEEE Transactions on Power Electronics.

[22]  Santanu Kapat,et al.  Unified Digital Current Mode Control Tuning With Near Optimal Recovery in a CCM Buck Converter , 2016, IEEE Transactions on Power Electronics.

[23]  Wenping Cao,et al.  Ultrahigh Step-up DC–DC Converter for Distributed Generation by Three Degrees of Freedom (3DoF) Approach , 2016, IEEE Transactions on Power Electronics.

[24]  Franco Fiori,et al.  A New Mirroring Circuit for Power MOS Current Sensing Highly Immune to EMI , 2013, Sensors.

[25]  Yihua Hu,et al.  Three-Port DC–DC Converter for Stand-Alone Photovoltaic Systems , 2015, IEEE Transactions on Power Electronics.

[26]  Ching-Jan Chen,et al.  Subharmonic Instability Limits for ${\rm V}^2$ -Controlled Buck Converter With Outer Loop Closed/Open , 2016, IEEE Transactions on Power Electronics.