论文信息 - Implementation of a Decentralized PID Control System on an Experimental Platform Using LabVIEW

Implementation of a Decentralized PID Control System on an Experimental Platform Using LabVIEW

In this paper, the implementation of a decentralized control system is done on an experimental platform, which is dedicated to the study of fouling in industrial tubes. This plant is modelled as a multivariable system of order 2 × 2, whose the inputs are the voltage and current applied respectively in the plant actuators, and the outputs are flow and pressure measurements obtained by sensors in the main tube. The decentralized PID control system is performed by a supervisory system developed in LabVIEW software to verify the impact of fouling on the current behavior of the experimental platform, and thus enable performing predictive maintenance.

[1] K. Latha,et al. Multiple-loop PI Controller Design for TITO System using Teaching Learning Based Optimization , 2016 .

[2] G. M. Malwatkar,et al. Decentralized PID controller design for TITO processes with experimental validation , 2017 .

[3] Péricles R. Barros,et al. Application of Computer Software for System Identification and PID Control Loop Tuning to a Petrochemical Plant , 2009 .

[4] D. Seborg,et al. Multiloop PI/PID controller design based on Gershgorin bands , 2001 .

[5] Qing-Guo Wang,et al. PID Control for Multivariable Processes , 2008 .

[6] M. Salgado,et al. Brief Paper Achievable performance bounds for tall MIMO systems , 2011 .

[7] Subhransu Padhee,et al. Data logging and supervisory control of process using LabVIEW , 2011, IEEE Technology Students' Symposium.

[8] Tao Liu,et al. Analytical Multiloop PI/PID Controller Design for Two-by-Two Processes with Time Delays , 2005 .

[9] Tore Hägglund,et al. Decoupler and PID controller design of TITO systems , 2006 .