Effect of surface roughness on low-cycle fatigue behaviors of 316LN stainless steel in borated and lithiated high-temperature pressurized water

[1]  Tongmin Cui,et al.  Effects of surface treatments and temperature on the oxidation behavior of 308L stainless steel cladding in hydrogenated high-temperature water , 2022, Journal of Nuclear Materials.

[2]  E. Han,et al.  Effects of strain rate on low-cycle fatigue crack growth behavior of 316LN weld metal in high-temperature pressurized water , 2022, Corrosion Science.

[3]  Yujin Hu,et al.  Combined effects of machining-induced residual stress and external load on SCC initiation and early propagation of 316 stainless steel in high temperature high pressure water , 2021 .

[4]  N. Mary,et al.  Low-cycle fatigue behaviors of 316L austenitic stainless steels with different surface finishing in simulated pressurized water reactor primary water and an oxygenated, borated, lithiated high temperature water , 2021 .

[5]  J. Lu,et al.  Enhanced Mechanical Properties and Corrosion Resistance of 316l Stainless Steel by Pre-Forming a Gradient Nanostructured Surface Layer and Annealing , 2020, Acta Materialia.

[6]  C. Gardin,et al.  Low-cycle fatigue crack initiation and propagation from controlled surface imperfections in nuclear steels , 2020 .

[7]  E. Han,et al.  Corrosion Fatigue Behavior of 316LN Stainless Steel Hollow Specimen in High-Temperature Pressurized Water , 2020 .

[8]  Xiaolong Zhang,et al.  Effect of surface treatments on microstructure and stress corrosion cracking behavior of 308L weld metal in a primary pressurized water reactor environment , 2020 .

[9]  M. Tabarant,et al.  Corrosion mechanisms of 316L stainless steel in supercritical water: The significant effect of work hardening induced by surface finishes , 2019, Corrosion Science.

[10]  M. R. Hill,et al.  Effect of Strain Hardened Inner Surface Layers on Stress Corrosion Cracking of Type 316 Stainless Steel in Simulated PWR Primary Water , 2019, Metallurgical and Materials Transactions A.

[11]  E. Han,et al.  Corrosion fatigue behavior and crack-tip characteristic of 316LN stainless steel in high-temperature pressurized water , 2019, Journal of Nuclear Materials.

[12]  M. G. Burke,et al.  Understanding the effect of surface finish on stress corrosion crack initiation in warm-forged stainless steel 304L in high-temperature water , 2019, Scripta Materialia.

[13]  M. G. Burke,et al.  Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water , 2019, Acta Materialia.

[14]  E. Marquis,et al.  The role of surface deformation in the oxidation response of type 304 SS in high temperature deaerated water , 2018, Corrosion Science.

[15]  M. G. Burke,et al.  Stress corrosion crack initiation in machined type 316L austenitic stainless steel in simulated pressurized water reactor primary water , 2018, Corrosion Science.

[16]  T. Shoji,et al.  Effects of dissolved hydrogen and surface condition on the intergranular stress corrosion cracking initiation and short crack growth behavior of non-sensitized 316 stainless steel in simulated PWR primary water , 2017 .

[17]  R. Peng,et al.  Effect of surface grinding on chloride induced SCC of 304L , 2016 .

[18]  D. Eskin,et al.  Effect of surface roughness on corrosion behaviour of low carbon steel in inhibited 4 M hydrochloric acid under laminar and turbulent flow conditions , 2016 .

[19]  J. Mendez,et al.  Characterization of Damage During Low Cycle Fatigue of a 304L Austenitic Stainless Steel as a Function of Environment (Air, PWR Environment) and Surface Finish (Polished, Ground) , 2016 .

[20]  E. Han,et al.  Effects of surface states on the oxidation behavior of 316LN stainless steel in high temperature pressurized water , 2015 .

[21]  T. Marrow,et al.  Influence of milling on the development of stress corrosion cracks in austenitic stainless steel , 2015 .

[22]  E. Han,et al.  Analysis of Surface Oxide Films Formed in Hydrogenated Primary Water on Alloy 690TT Samples With Different Surface States , 2014 .

[23]  J. Mendez,et al.  Influence of the Strain Rate on the Low Cycle Fatigue Life of an Austenitic Stainless Steel with a Ground Surface Finish in Different Environments , 2014 .

[24]  J. Mendez,et al.  Influence of Surface Finish in Fatigue Design of Nuclear Power Plant Components , 2013 .

[25]  Wei Ke,et al.  Characterization of Different Surface States and Its Effects on the Oxidation Behaviours of Alloy 690TT , 2012 .

[26]  Ali Fatemi,et al.  Surface finish effect on fatigue behavior of forged steel , 2012 .

[27]  E. Andrieu,et al.  Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water , 2012 .

[28]  M. Higuchi,et al.  Development of an Environmental Fatigue Evaluation Method for Nuclear Power Plants in JSME Code , 2011 .

[29]  Vivekanand Kain,et al.  Microstructural changes in AISI 304L stainless steel due to surface machining: Effect on its susceptibility to chloride stress corrosion cracking , 2010 .

[30]  E. Han,et al.  Effects of scratching on corrosion and stress corrosion cracking of Alloy 690TT at 58 C and 330 C , 2009 .

[31]  J. Embury,et al.  Effect of surface finish on high temperature fatigue of a nickel based super alloy , 2009 .

[32]  M. Hanson,et al.  Electropolishing effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water , 2008 .

[33]  E. Han,et al.  Influence of surface finish on fatigue cracking behavior of reactor pressure vessel steel in high temperature water , 2006 .

[34]  Y. Takeda,et al.  Role of Work-Hardened Surface Layer in Initiation of Environmentally Assisted Cracking in High-Temperature Water , 2006 .

[35]  G. Bao,et al.  Stress corrosion cracking sealing in overlaying of Inconel 182 by laser surface melting , 2006 .

[36]  William J. Shack,et al.  The effect of LWR coolant environments on the fatigue life of reactor materials. , 2006 .

[37]  N. Fredj,et al.  Fatigue life improvements of the AISI 304 stainless steel ground surfaces by wire brushing , 2004 .

[38]  O. K. Chopra,et al.  Review of the margins for ASME code fatigue design curve - effects of surface roughness and material variability. , 2003 .

[39]  J. Robertson.  The mechanism of high temperature aqueous corrosion of steel , 1989 .

[40]  W. Wood.  Formation of fatigue cracks , 1958 .