The Use of Novel F-RAFT Agents in High Temperature and High Pressure Ethene Polymerization: Can Control be Achieved?

Simulations are employed to establish the feasibility of achieving controlled/living ethene polymerizations. Such simulations indicate that reversible addition-fragmentation chain transfer ( RAFT) agents carrying a fluorine Z group may be suitable to establish control in high-pressure high-temperature ethene polymerizations. Based on these simulations, specific fluorine (F)-RAFT agents have been designed and tested. The initial results are promising and indicate that it may indeed be possible to achieve molecular weight distributions with a polydispersity being significantly lower than that observed in the conventional free radical process. In our initial trials presented here (using the F-RAFT agent isopropylfluorodithioformate), a correlation between the degree of polymerization and conversion can indeed be observed. Both the lowered polydispersity and the linear correlation between molecular weight and conversion indicate that control may in principle be possible.

[1]  G. Wegner,et al.  Controlled/living ring-closing cyclopolymerization of diallyldimethylammonium chloride via the reversible addition fragmentation chain transfer process , 2007 .

[2]  C. Barner‐Kowollik,et al.  Mechanism and kinetics of dithiobenzoate-mediated RAFT polymerization. I. The current situation , 2006 .

[3]  C. Barner‐Kowollik,et al.  Addition-Fragmentation Kinetics of Fluorodithioformates (F-RAFT) in Styrene, Vinyl Acetate, and Ethylene Polymerization: An Ab Initio Investigation , 2006 .

[4]  N. Aust,et al.  A column by-pass system and its application in high-temperature size-exclusion chromatography , 2006 .

[5]  M. Wulkow,et al.  The Use of Simulation Techniques in Developing Kinetic Models for Polymerization , 2003 .

[6]  Thomas P. Davis,et al.  RAFTing down under: Tales of missing radicals, fancy architectures, and mysterious holes , 2003 .

[7]  Leonie Barner,et al.  Reversible addition–fragmentation chain‐transfer polymerization: Unambiguous end‐group assignment via electrospray ionization mass spectrometry , 2002 .

[8]  C. Barner‐Kowollik,et al.  Kinetic Investigations of Reversible Addition Fragmentation Chain Transfer Polymerizations: Cumyl Phenyldithioacetate Mediated Homopolymerizations of Styrene and Methyl Methacrylate , 2001 .

[9]  M. Busch.  Modeling Kinetics and Structural Properties in High-Pressure Fluid-Phase Polymerization , 2001 .

[10]  M. Busch,et al.  A General Model Describing Molecular Weight Distribution and Branching Indices in Copolymerizations Demonstrated by the High-Pressure Free-Radical Copolymerization of Ethene and Methyl Acrylate , 2001 .

[11]  H. Pasch,et al.  Analysis of polyolefin blends by crystallization analysis fractionation , 2000 .

[12]  M. Busch,et al.  Modellierung der Ethen-Polymerisation im Elenac-Hochdruck-Rohrreaktorverfahren , 1999 .

[13]  G. Luft,et al.  Phase equilibria of poly(ethylene-co-vinyl acetate) copolymers in subcritical and supercritical ethylene and ethylene-vinyl acetate mixtures , 1996 .

[14]  G. Luft,et al.  Copolymerisation of ethylene and vinyl acetate under high pressure with a peroxide/triethylaluminium system , 1996 .

[15]  M. Busch,et al.  Mini-Technikumsanlage für Hochdruck-Polymerisationen bei kontinuierlicher Reaktionsführung , 1995 .

[16]  M. Busch,et al.  Entwicklung eines kontinuierlich betriebenen Hochdruck-Hochtemperatur-Rührkessels mit Licht-Einkopplung , 1994 .

[17]  Jacques Villermaux,et al.  Free-radical polymerization engineering—III. Modelling homogeneous polymerization of ethylene: mathematical model and new method for obtaining molecular-weight distribution , 1992 .

[18]  Jacques Villermaux,et al.  Free-radical polymerization engineering—IV. Modelling homogeneous polymerization of ethylene: determination of model parameters and final adjustment of kinetic coefficients , 1992 .