AN ANALYSIS TOOL FOR DESIGN AND CERTIFICATION OF POSTBUCKLING COMPOSITE AEROSPACE STRUCTURES

In aerospace, carbon-fiber-reinforced polymer (CFRP) composites and postbuckling skin-stiffened structures are key technologies that have been used to improve structural efficiency. However, the application of composite postbuckling structures in aircraft has been limited due to concerns related to both the durability of composite structures and the accuracy of design tools. In this work, a finite element analysis tool for design and certification of aerospace structures is presented, which predicts collapse by taking the critical damage mechanisms into account. The tool incorporates a global–local analysis technique for predicting interlaminar damage initiation, and degradation models to capture the growth of a pre-existing interlaminar damage region, such as a delamination or skin–stiffener debond, and in-plane ply damage mechanisms such as fiber fracture and matrix cracking. The analysis tool has been applied to single- and multistiffener fuselage-representative composite panels, in both intact and predamaged configurations. This has been performed in a design context, in which panel configurations are selected based on their suitability for experimental testing, and in an analysis context for comparison with experimental results as being representative of aircraft certification studies. For all cases, the tool was capable of accurately capturing the key damage mechanisms contributing to final structural collapse, and suitable for the design of next-generation composite aerospace structures.

[1]  Adrian C. Orifici,et al.  Degradation models for the collapse analysis of composite aerospace structures , 2007 .

[2]  W. Marsden.  I and J , 2012 .

[3]  Javid Bayandor,et al.  Failure in Stringer Interfaces in Postbuckled Composite Stiffened Panels , 2007 .

[4]  Chiara Bisagni,et al.  A Finite Element Methodology for Analysing Degradation and Collapse in Postbuckling Composite Aerospace Structures , 2009 .

[5]  Pedro P. Camanho,et al.  Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear , 2006 .

[6]  Pedro Ponces Camanho,et al.  FAILURE CRITERIA FOR FIBRE-REINFORCED POLYMER COMPOSITES , 2002 .

[7]  Fu-Kuo Chang,et al.  Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Compressive Loadings: Part I—Analysis , 1991 .

[8]  Richard Degenhardt,et al.  Development of a Finite Element Methodology for Modelling Mixed-mode Delamination Growth in Composite Structures , 2007 .

[9]  J. Bayandor,et al.  Development of a finite-element analysis methodology for the propagation of delaminations in composite structures , 2007 .

[10]  Ireneusz Lapczyk,et al.  Progressive damage modeling in fiber-reinforced materials , 2007 .

[11]  Richard Degenhardt,et al.  Development of a Finite Element Methodology for the Collapse Analysis of Composite Aerospace Structures , 2007 .

[12]  Richard Degenhardt,et al.  The use of damage as a design parameter for postbuckling composite aerospace structures , 2008 .

[13]  Tanchum Weller,et al.  Failure analysis in postbuckled composite T-sections , 2008 .

[14]  Emile S. Greenhalgh,et al.  The effect of defects on the performance of post-buckled CFRP stringer-stiffened panels , 2003 .

[15]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[16]  Javid Bayandor,et al.  An analysis methodology for failure in postbuckling skin-stiffener interfaces , 2008 .

[17]  Haim Abramovich,et al.  Buckling analysis of composite panels , 2006 .

[18]  Richard Degenhardt,et al.  COCOMAT - Improved Material Exploitation at Safe Design of Composite Airframe Structures by Accurate Simulation of Collapse , 2004 .

[19]  Richard Degenhardt,et al.  COCOMAT—improved material exploitation of composite airframe structures by accurate simulation of postbuckling and collapse , 2006 .

[20]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[21]  M. Benzeggagh,et al.  Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus , 1996 .

[22]  Rolf Zimmermann,et al.  Buckling and postbuckling of stringer stiffened fibre composite curved panels – Tests and computations , 2006 .

[23]  Javid Bayandor,et al.  Compression and post-buckling damage growth and collapse analysis of flat composite stiffened panels , 2008 .