Improvement the electrochemical performance of Cr doped layered-spinel composite cathode material Li1.1Ni0.235Mn0.735Cr0.03O2.3 with Li4Ti5O12 coating

[1]  V. Battaglia,et al.  Investigation the electrochemical performance of Li1.2Ni0.2Mn0.6O2 cathode material with ZnAl2O4 coating for lithium ion batteries , 2016 .

[2]  D. Aurbach,et al.  Studies of a layered-spinel Li[Ni1/3Mn2/3]O2 cathode material for Li-ion batteries synthesized by a hydrothermal precipitation , 2016 .

[3]  Seong Ihl Woo,et al.  Activity enhancement of WO3 modified Fe2O3 catalyst for the selective catalytic reduction of NOx by NH3 , 2016 .

[4]  Feng Wu,et al.  Surface Modification of Li-Rich Cathode Materials for Lithium-Ion Batteries with a PEDOT:PSS Conducting Polymer. , 2016, ACS applied materials & interfaces.

[5]  Zhongliang Xiao,et al.  Structural analysis of layered Li2MnO3–LiMO2 (M=Ni1/3Mn1/3Co1/3, Ni1/2Mn1/2) cathode materials by Rietveld refinement and first-principles calculations , 2016 .

[6]  T. Chen,et al.  The effect of AlF3 modification on the physicochemical and electrochemical properties of Li-rich layered oxide , 2016 .

[7]  Yuegang Zhang,et al.  Layered Lithium-Rich Oxide Nanoparticles Doped with Spinel Phase: Acidic Sucrose-Assistant Synthesis and Excellent Performance as Cathode of Lithium Ion Battery. , 2016, ACS applied materials & interfaces.

[8]  Yunjian Liu,et al.  Mitigating the voltage decay and improving electrochemical properties of layered-spinel Li1.1Ni0.25Mn0.75O2.3 cathode material by Cr doping , 2016 .

[9]  Muratahan Aykol,et al.  Layered-Layered-Spinel Cathode Materials Prepared by a High-Energy Ball-Milling Process for Lithium-ion Batteries. , 2016, ACS applied materials & interfaces.

[10]  Yunjian Liu,et al.  Effect of cooling method on the electrochemical performance of layered-spinel composite cathode Li1.1Ni0.25Mn0.75O2.3 , 2015 .

[11]  Zhixing Wang,et al.  A novel architecture designed for lithium rich layered Li[Li0.2Mn0.54Ni0.13Co0.13]O2 oxides for lithium-ion batteries , 2015 .

[12]  Xiaoping Zhang,et al.  Novel synthesis of LiCoPO4–Li3V2(PO4)3 composite cathode material for Li-ion batteries , 2015 .

[13]  Yunjian Liu,et al.  Enhanced electrochemical performances of layered cathode material Li1.5Ni0.25Mn0.75O2.5 by coating with LiAlO2 , 2015 .

[14]  R. Ren,et al.  Preparation of spherical Li4Ti5O12 anode materials by spray drying , 2015 .

[15]  Feng Wu,et al.  The positive roles of integrated layered-spinel structures combined with nanocoating in low-cost Li-rich cathode Li[Li₀.₂Fe₀.₁Ni₀.₁₅Mn₀.₅₅]O₂ for lithium-ion batteries. , 2014, ACS applied materials & interfaces.

[16]  Xiaowei Li,et al.  Synthesis and electrochemical properties of xLiMn0.9Fe0.1PO4·yLi3V2(PO4)3/C composite cathode materials for lithium–ion batteries , 2014 .

[17]  Gang Yang,et al.  Li2ZrO3-coated 0.4Li2MnO3·0.6LiNi1/3Co1/3Mn1/3O2 for high performance cathode material in lithium-ion battery , 2014 .

[18]  Chaochao Fu,et al.  A New Spinel‐Layered Li‐Rich Microsphere as a High‐Rate Cathode Material for Li‐Ion Batteries , 2014 .

[19]  Jianming Zheng,et al.  Mitigating voltage fade in cathode materials by improving the atomic level uniformity of elemental distribution. , 2014, Nano letters.

[20]  Yunjian Liu,et al.  Influence of Li content on the structure and electrochemical performance of Li1+xNi0.25Mn0.75O2.25+x/2 cathode for Li-ion battery , 2014 .

[21]  J. Tu,et al.  Effect of Sm2O3 modification on Li[Li0.2Mn0.56Ni0.16Co0.08]O2 cathode material for lithium ion batteries , 2013 .

[22]  C. J. Yim,et al.  Facile synthesis of electrospun Li(1.2)Ni(0.17)Co(0.17)Mn(0.5)O2 nanofiber and its enhanced high-rate performance for lithium-ion battery applications. , 2013, ACS applied materials & interfaces.

[23]  Xunhui Xiong,et al.  Synthesis and electrochemical performance of xLi2MnO3·(1 − x)LiMn0.5Ni0.4Co0.1O2 for lithium ion battery , 2013 .

[24]  Xueping Gao,et al.  AlF3-coated Li(Li0.17Ni0.25Mn0.58)O2 as cathode material for Li-ion batteries , 2012 .

[25]  Xinxi Li,et al.  Research on Li3V2(PO4)3/Li4Ti5O12/C composite cathode material for lithium ion batteries , 2012 .

[26]  Yongyao Xia,et al.  Preparation of carbon-coated LiFe0.2Mn0.8PO4 cathode material and its application in a novel battery with Li4Ti5O12 anode , 2012 .

[27]  A. Manthiram,et al.  High-voltage, high-energy layered-spinel composite cathodes with superior cycle Life for lithium-ion batteries , 2012 .

[28]  K. Takada,et al.  High rate capabilities of all-solid-state lithium secondary batteries using Li4Ti5O12-coated LiNi0.8Co0.15Al0.05O2 and a sulfide-based solid electrolyte , 2011 .

[29]  Shinichi Komaba,et al.  Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo(1/3)Ni(1/3)Mn(1/3)O2. , 2011, Journal of the American Chemical Society.

[30]  Jaephil Cho,et al.  LiNi0.8Co0.15Al0.05O2 cathode materials prepared by TiO2 nanoparticle coatings on Ni0.8Co0.15Al0.05(OH)2 precursors , 2010 .

[31]  C. Lee,et al.  Synthesis and electrochemical characterizations of nano-scaled Zn doped LiMn2O4 cathode materials for rechargeable lithium batteries , 2010 .

[32]  R. Dedryvère,et al.  Electrode/Electrolyte Interface Reactivity in High-Voltage Spinel LiMn1.6Ni0.4O4/Li4Ti5O12 Lithium-Ion Battery , 2010 .

[33]  Tingfeng Yi,et al.  Enhanced cycling stability of microsized LiCoO2 cathode by Li4Ti5O12 coating for lithium ion battery , 2010 .

[34]  Michael M. Thackeray,et al.  Enhancing the rate capability of high capacity xLi2MnO3 · (1 -x)LiMO2 (M = Mn, Ni, Co) electrodes by Li-Ni-PO4 treatment , 2009 .

[35]  Á. Caballero,et al.  PMMA-assisted synthesis of Li1−xNi0.5Mn1.5O4−δ for high-voltage lithium batteries with expanded rate capability at high cycling temperatures , 2008 .

[36]  I. Belharouak,et al.  Comparative study of different crystallographic structure of LiNi0.5Mn1.5O4−δ cathodes with wide operation voltage (2.0–5.0 V) , 2007 .

[37]  Christopher S. Johnson,et al.  Lithium-manganese-nickel-oxide electrodes with integrated layered-spinel structures for lithium batteries , 2007 .

[38]  Ling Huang,et al.  Layered/spinel heterostructured Li-rich materials synthesized by a one-step solvothermal strategy with enhanced electrochemical performance for Li-ion batteries , 2016 .

[39]  Li Lu,et al.  Advances in Sustain Stable Voltage of Cr-Doped Li-Rich Layered Cathodes for Lithium Ion Batteries , 2014 .

[40]  Dean J. Miller,et al.  Advances in Stabilizing ‘Layered-Layered’ xLi2MnO3·(1-x)LiMO2 (M=Mn, Ni, Co) Electrodes with a Spinel Component , 2014 .

[41]  X. Gao,et al.  Enhancement of electrochemical performance of Li(Li0.2Mn0.54Ni0.13Co0.13)O2 by surface modification with Li4Ti5O12 , 2014 .

[42]  Christopher S. Johnson,et al.  Composite ‘Layered-Layered-Spinel’ Cathode Structures for Lithium-Ion Batteries , 2013 .

[43]  Tingfeng Yi,et al.  Structure and electrochemical performance of Li4Ti5O12-coated LiMn1.4Ni0.4Cr0.2O4 spinel as 5 V materials , 2009 .