A design procedure for tied braced frames
暂无分享,去创建一个
[1] David Bonowitz,et al. Seismic Response of an Instrumented 13-Story Steel Frame Building Damaged in the 1994 Northridge Earthquake , 1997 .
[2] A. Chopra,et al. Inelastic Deformation Ratios for Design and Evaluation of Structures: Single-Degree-of- Freedom Bilinear Systems , 2004 .
[3] Ulf Wickström,et al. Comments on calculation of temperature in fire-exposed bare steel structures in prEN 1993-1-2: Eurocode 3—design of steel structures—Part 1–2: general rules—structural fire design , 2005 .
[4] E. P. Popov,et al. Seismic Behavior of Active Beam Links in Eccentrically Braced Frames , 1983 .
[5] James M. Ricles,et al. Composite Action in Eccentrically Braced Frames , 1989 .
[6] Egor P. Popov,et al. On Design of Eccentrically Braced Frames , 1989 .
[7] Jinkoo Kim,et al. Response modification factors of chevron-braced frames , 2005 .
[8] Egor P. Popov,et al. ECCENTRICALLY BRACED STEEL FRAMES FOR EARTHQUAKS , 1978 .
[9] Iman Hajirasouliha,et al. Optimum seismic design of concentrically braced steel frames: concepts and design procedures , 2005 .
[10] Egor P. Popov,et al. Cyclic Web Buckling Control for Shear Link Beams , 1986 .
[11] Egor P. Popov,et al. General Behavior of WF Steel Shear Link Beams , 1986 .
[12] Egor P. Popov,et al. Design considerations for shear links in eccentrically braced frames , 1983 .
[13] Robert Tremblay,et al. Seismic Performance of Concentrically Braced Steel Frames in Multistory Buildings with Mass Irregularity , 2005 .