Will cool roofs improve the thermal performance of our built environment? A study assessing roof systems in Bahrain

A number of international campaigns have recently proposed the use of cool roofs worldwide in order to cope with the summer urban heat island (UHI) effect. This work investigates cool roof strategy and examines the potential of such a strategy for Bahrain. Full-scale measurement, meteorological modelling and thermal simulation of five standard roofs were performed during particular summer days due to the high intensity levels of solar irradiation. This work shows that the light tile roof and metal decking are relatively cooler and more comfortable than others and that the maximum reduction in heat gain occurs for a light tile roof with thermal insulation materials. Nevertheless, without insulation the cooling load is increased by only 1.3%. This percentage seems not to be cost-effective where economics and building construction are concerned. In contrast, the reduction percentage due to the use of thermal insulation in the case of dark tile roof, felt bitumen roof and screed roof increases to 5–7%, which is more cost effective. This work concludes that the cool roof strategy is the most cost-effective for the hot climate of Bahrain, which has a long cooling season. With the current levels of urban development in Bahrain, cool roofs can reduce UHI intensity and building cooling loads, lowering demand for electricity and greenhouse gas emissions from power plants. To avoid any negative consequences from using this strategy, however, trade-offs between urban mitigation and adoptation strategies and complementary technologies should be accounted for in future urban development plans.

[1]  P. Jones,et al.  Temperature decreases in an urban canyon due to green walls and green roofs in diverse climates , 2008 .

[2]  M. Santamouris,et al.  Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions , 2011 .

[3]  M. Santamouris.  Using cool pavements as a mitigation strategy to fight urban heat island—A review of the actual developments , 2013 .

[4]  M. Santamouris.  Cooling the cities – A review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments , 2014 .

[5]  A. Presciutti,et al.  Experimental evaluation of urban heat island mitigation potential of retro-reflective pavement in urban canyons , 2016 .

[6]  Jan Carmeliet,et al.  Comparative assessment of various heat island mitigation measures , 2014 .

[7]  M. Bruse,et al.  Simulating surface–plant–air interactions inside urban environments with a three dimensional numerical model , 1998 .

[8]  L. Cabeza,et al.  Plant cover and floristic composition effect on thermal behaviour of extensive green roofs , 2015 .

[9]  Umberto Berardi,et al.  The Urban Heat Island Effect in the City of Toronto , 2015 .

[10]  Haider Taha,et al.  Mesoscale meteorological and air quality impacts of increased urban albedo and vegetation , 1997 .

[11]  Elena Morini,et al.  Beneficial effects of retroreflective materials in urban canyons: results from seasonal monitoring campaign , 2015 .

[12]  Edward Ng,et al.  Climate Information for Improved Planning and Management of Mega Cities (Needs Perspective) , 2010 .

[13]  Hanan Taleb,et al.  Enhancing the skin performance of hospital buildings in the UAE , 2016 .

[14]  M Marceau,et al.  Solar Reflectance of Concretes for LEED Sustainable Sites Credit: Heat Island Effect , 2007 .

[15]  P. Morefield,et al.  Urban adaptation can roll back warming of emerging megapolitan regions , 2014, Proceedings of the National Academy of Sciences.

[16]  W. E. Alnaser,et al.  Simple models for estimating the total, diffuse, direct and normal solar irradiation in Bahrain , 1999 .

[17]  Stephan Weber,et al.  Comparative microclimate and dewfall measurements at an urban green roof versus bitumen roof , 2015 .

[18]  Jelena Srebric,et al.  Effects of plant and substrate selection on thermal performance of green roofs during the summer , 2014 .

[19]  L. Chu,et al.  Thermal performance of a vegetated cladding system on facade walls , 2010 .

[20]  C. Cartalis,et al.  On the impact of urban heat island and global warming on the power demand and electricity consumption of buildings—A review , 2015 .

[21]  Flora Bougiatioti,et al.  The summer thermal behaviour of “skin” materials for vertical surfaces in Athens, Greece as a decisive parameter for their selection , 2009 .

[22]  S. Sharples,et al.  Quantifying the domestic electricity consumption for air-conditioning due to urban heat islands in hot arid regions , 2013 .

[23]  Samar Sheweka,et al.  Green Facades as a New Sustainable Approach Towards Climate Change , 2012 .

[24]  J. Stocker,et al.  The effectiveness of retrofitted green and cool roofs at reducing overheating in a naturally ventilated office in London: Direct and indirect effects in current and future climates , 2014 .

[25]  E. O. Assem,et al.  Correlating thermal transmittance limits of walls and roofs to orientation and solar absorption , 2011 .

[26]  H. Akbari,et al.  Calculating energy-saving potentials of heat-island reduction strategies , 2005 .

[27]  Haider Taha,et al.  Modeling the impacts of large-scale albedo changes on ozone air quality in the South Coast Air Basin , 1997 .

[28]  M. Jacobson,et al.  Effects of Urban Surfaces and White Roofs on Global and Regional Climate , 2012 .

[29]  H. Taha.  Urban climates and heat islands: albedo, evapotranspiration, and anthropogenic heat , 1997 .

[30]  Hassan Radhi,et al.  Impacts of urbanisation on the thermal behaviour of new built up environments: A scoping study of the urban heat island in Bahrain , 2013 .

[31]  M. Santamouris,et al.  On the development, optical properties and thermal performance of cool colored coatings for the urban environment , 2007 .

[32]  H. Akbari,et al.  ASTM standards for measuring solar reflectance and infrared emittance of construction materials and comparing their steady-state surface temperatures , 1996 .

[33]  M. Santamouris,et al.  A study of the thermal performance of reflective coatings for the urban environment , 2006 .

[34]  H. Akbari,et al.  Global cooling updates: Reflective roofs and pavements , 2012 .

[35]  Yinghong Qin,et al.  A review on the development of cool pavements to mitigate urban heat island effect , 2015 .

[36]  M. Oppenheimer,et al.  The effectiveness of cool and green roofs as urban heat island mitigation strategies , 2014 .

[37]  V. Benson-Lira,et al.  Prioritizing urban sustainability solutions: coordinated approaches must incorporate scale-dependent built environment induced effects , 2015 .

[38]  H. Mayer,et al.  Heat stress in Greece , 1997, International journal of biometeorology.

[39]  M. Santamouris,et al.  On the impact of urban climate on the energy consumption of buildings , 2001 .

[40]  Joshua Ryan New,et al.  Comparison of software models for energy savings from cool roofs , 2016 .

[41]  Vishal Garg,et al.  Quantifying the direct benefits of cool roofs in an urban setting: Reduced cooling energy use and lowered greenhouse gas emissions , 2012 .

[42]  H. Radhi,et al.  Can envelope codes reduce electricity and CO2 emissions in different types of buildings in the hot climate of Bahrain , 2009 .

[43]  M. Santamouris,et al.  On the energy impact of urban heat island and global warming on buildings , 2014 .

[44]  E. Kuras,et al.  Heterogeneity in individually experienced temperatures (IETs) within an urban neighborhood: insights from a new approach to measuring heat exposure , 2015, International Journal of Biometeorology.

[45]  F. Nocera,et al.  A multi-criteria methodology for comparing the energy and environmental behavior of cool, green and traditional roofs , 2015 .

[46]  R. Prado,et al.  Measurement of albedo and analysis of its influence the surface temperature of building roof materials , 2005 .

[47]  Sarah Bretz,et al.  Preliminary survey of the solar reflectance of cool roofing materials , 1997 .

[48]  A. Spanou,et al.  Building and Environment , 2012 .