뿜칠시공에 의한 단면복구재의 시공성 및 공학적 특성에 관한 실험적 연구

These days, serious concerns of reinforced concrete have been raised recently over steel-bar corrosion, cracking, the deterioration of durability and structural stress resistance and so on, all due to the effects of exterior factors. Such being the case, in domestic, various repair materials and method systems to keep up with these reinforced concrete deteriorated due to salt damage, carbonation, chemical decay et. developed and applied. However, on-site quality control of various repair materials and method systems isn't achieved desirably because it is depend completely on a men of experience' opinions above all else regardless of various on - site environments. In this background, mock up test with due regard to real on-site environments was performed to secure fundamental data for establishment of desirable on-site quality control. Mock up test using repair mortar analyzed from angles of construction methods, mechanical spraying pressures, W 1M. Construction methods were designed manpower method and spraying method, spraying pressures were designed 32, 42, 52 psi, W/M were designed 14.4, 15.4, 16.4 %. And compressive strength, Chloride ion diffusion coefficient, bond strength, SEM of mock up test specimens were evaluated. In conclusion, we confirmed excellency of mechanical spraying pressures, fined extremely excellency of condition of spraying pressure 42 ps, W/M 14.4% within this study. therefore the results of this study will be useful to provide fundamental data for establishment of desirable on-site quality control.