Prediction of the thermo-fluids of gearbox systems

[1]  Miad Yazdani,et al.  A novel approach for modeling the multiscale thermo-fluids of geared systems , 2014 .

[2]  Miad Yazdani,et al.  A Novel Approach to Model Thermo-Fluids of Gearbox Systems , 2013 .

[3]  Decheng Wan,et al.  OVERSET-RANS COMPUTATIONS OF TWO SURFACE SHIPS MOVING IN VISCOUS FLUIDS , 2012 .

[4]  Robert F. Handschuh,et al.  CFD Analysis of Gear Windage Losses: Validation and Parametric Aerodynamic Studies , 2011 .

[5]  Ahmet Kahraman,et al.  An Experimental Investigation of Spur Gear Efficiency , 2008 .

[6]  S. Bair,et al.  Correction Factor Formula to Predict the Central and Minimum Film Thickness for Shear-Thinning Fluids in EHL , 2008 .

[7]  S. Bair,et al.  Thermal Elastohydrodynamic Lubrication of Point Contacts Using a Newtonian/Generalized Newtonian Lubricant , 2008 .

[8]  Graham Johnson,et al.  Gear Windage: A Review , 2008 .

[9]  F. Stern,et al.  Ship motions using single-phase level set with dynamic overset grids , 2007 .

[10]  Kathy Simmons,et al.  Modelling windage power loss from an enclosed spur gear , 2007 .

[11]  Fabrice Ville,et al.  Prediction of Power Losses Due to Tooth Friction in Gears , 2006 .

[12]  Frederick Stern,et al.  Unsteady RANS simulation of the ship forward speed diffraction problem , 2006 .

[13]  Fred B. Oswald,et al.  Shuttle Rudder/Speed Brake Power Drive Unit (PDU) Gear Scuffing Tests With Flight Gears , 2005 .

[14]  Christophe Changenet,et al.  Windage Losses in High Speed Gears—Preliminary Experimental and Theoretical Results , 2004 .

[15]  Hui Long,et al.  Operating temperatures of oil-lubricated medium-speed gears: Numerical models and experimental results , 2003 .

[16]  Punit Kumar,et al.  Thermal EHL of Rough Rolling/Sliding Line Contacts Using a Mixture of Two Fluids at Dynamic Loads , 2002 .

[17]  Daniel Play,et al.  Thermal Behavior of Power Gearing Transmission, Numerical Prediction, and Influence of Design Parameters , 1999 .

[18]  Farshid Sadeghi,et al.  Thermal Elastohydrodynamic Lubrication of Rolling/Sliding Contacts , 1990 .

[19]  P. Colella,et al.  Local adaptive mesh refinement for shock hydrodynamics , 1989 .

[20]  S. H. Loewenthal,et al.  Design of Spur Gears for Improved Efficiency , 1982 .

[21]  William R. D. Wilson,et al.  A Thermal Elastohydrodynamic Inlet Zone Analysis , 1975 .

[22]  B. Sternlicht,et al.  Theory of Lubrication and Failure of Rolling Contacts , 1961 .

[23]  J. Liou.  A Theoretical and Experimental Investigation of Roller and Gear Scuffing , 2010 .

[24]  Ahmet Kahraman,et al.  Prediction of Mechanical Efficiency of Parallel-Axis Gear Pairs , 2007 .

[25]  Shifeng Wu,et al.  A friction model of partial-EHL contacts and its application to power loss in spur gears , 1991 .

[26]  K. F. Martin,et al.  The Efficiency of Involute Spur Gears , 1981 .

[27]  L. S. Akin,et al.  Analytical and Experimental Spur Gear Tooth Temperature as Affected by Operating Variables , 1981 .

[28]  H. Cheng,et al.  A Refined Solution to the Thermal-Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders , 1965 .

[29]  Darle W. Dudley,et al.  Gear Handbook : The design, Manufacture and application of Gears , 1962 .