Design analysis of a passive weight-support lower-extremity-exoskeleton with compliant knee-joint

This paper presents the design concept of a weight-support lower-extremity-exoskeleton (LEE) with a compliant joint to relieve compressive load in the knee. Along with a leg dynamic model and a knee bio-joint model, a compliant exoskeleton knee-joint has been designed using topology optimization and experimentally evaluated. Results suggest that the gait-based design of a LEE can be divided into two parts in terms of knee angles; compliant coupling and body-weight support. The concept feasibility and dynamic models of the passive LEE design have been experimentally validated with measured plantar forces. Both simulation and experimental results agree with data in-vivo confirming the effectiveness of the LEE in supporting human body-weight during walking, and also provide a basis for computing the internal knee forces as a percentage of bodyweight.

[1]  Ashvin Thambyah,et al.  Estimation of bone-on-bone contact forces in the tibiofemoral joint during walking. , 2005, The Knee.

[2]  Alfred D. Grant.  Gait Analysis: Normal and Pathological Function , 2010 .

[3]  G. Bergmann,et al.  Loading of the knee joint during activities of daily living measured in vivo in five subjects. , 2010, Journal of biomechanics.

[4]  Kok-Meng Lee,et al.  An adaptive knee joint exoskeleton based on biological geometries , 2011, 2011 IEEE International Conference on Robotics and Automation.

[5]  Can-Jun Yang,et al.  A walking monitoring shoe system for simultaneous plantar-force measurement and gait-phase detection , 2010, IEEE ASME International Conference on Advanced Intelligent Mechatronics.

[6]  Josep Amat,et al.  Design of a 3-DoF joint system with dynamic servo-adaptation in orthotic applications , 2011, 2011 IEEE International Conference on Robotics and Automation.

[7]  Patrick A Costigan,et al.  Determinants of self-report outcome measures in people with knee osteoarthritis. , 2006, Archives of physical medicine and rehabilitation.

[8]  Vincent Hayward,et al.  DESIGN OF SELF-ADJUSTING ORTHOSES FOR REHABILITATION , 2009 .

[9]  A Shirazi-Adl,et al.  Knee joint biomechanics in open-kinetic-chain flexion exercises. , 2008, Clinical biomechanics.

[10]  Shahid Hussain,et al.  An Adaptive Wearable Parallel Robot for the Treatment of Ankle Injuries , 2014, IEEE/ASME Transactions on Mechatronics.

[11]  Paul DeVita,et al.  Weight loss reduces knee-joint loads in overweight and obese older adults with knee osteoarthritis. , 2005, Arthritis and rheumatism.

[12]  Yasushi Ikeuchi,et al.  Walking assist device with bodyweight support system , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[13]  F.C.T. van der Helm,et al.  Kinematic Design to Improve Ergonomics in Human Machine Interaction , 2006, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[14]  A Shirazi-Adl,et al.  Computational biomechanics of knee joint in open kinetic chain extension exercises , 2008, Computer methods in biomechanics and biomedical engineering.

[15]  Sunil Kumar Agrawal,et al.  Design of a Cable-Driven Arm Exoskeleton (CAREX) for Neural Rehabilitation , 2012, IEEE Transactions on Robotics.

[16]  Kok-Meng Lee,et al.  Kinematic and dynamic analysis of an anatomically based knee joint. , 2010, Journal of biomechanics.

[17]  K. An,et al.  Comparison of tibiofemoral joint forces during open-kinetic-chain and closed-kinetic-chain exercises. , 1993, The Journal of bone and joint surgery. American volume.

[18]  S. K. Banala,et al.  Novel Gait Adaptation and Neuromotor Training Results Using an Active Leg Exoskeleton , 2010, IEEE/ASME Transactions on Mechatronics.

[19]  Patrick A Costigan,et al.  Mechanical factors relate to pain in knee osteoarthritis. , 2008, Clinical biomechanics.

[20]  Can-Jun Yang,et al.  Adaptive Knee Joint Exoskeleton Based on Biological Geometries , 2014, IEEE/ASME Transactions on Mechatronics.

[21]  E. Kellis.  Tibiofemoral joint forces during maximal isokinetic eccentric and concentric efforts of the knee flexors. , 2001, Clinical biomechanics.

[22]  Frans C. T. van der Helm,et al.  Self-Aligning Exoskeleton Axes Through Decoupling of Joint Rotations and Translations , 2009, IEEE Transactions on Robotics.

[23]  Annegret Mündermann,et al.  The role of ambulatory mechanics in the initiation and progression of knee osteoarthritis , 2006, Current opinion in rheumatology.

[24]  W. Herzog,et al.  Lines of action and moment arms of the major force-carrying structures crossing the human knee joint. , 1993, Journal of anatomy.

[25]  T. P. Andriacchi,et al.  A study of factors influencing muscle activity about the knee joint , 1984, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[26]  Francesco Giovacchini,et al.  Mechatronic Design and Characterization of the Index Finger Module of a Hand Exoskeleton for Post-Stroke Rehabilitation , 2012, IEEE/ASME Transactions on Mechatronics.