Effect of hydrocarbon chain length of amphiphilic ruthenium dyes on solid-state dye-sensitized photovoltaics.

We studied the influence of the hydrophobic hydrocarbon chain length of amphiphilic ruthenium dyes on the device performance in solid-state dye-sensitized solar cells. We found that the dyes with longer hydrocarbon chains gave higher efficiency values when used as a sensitizer in solid-state dye-sensitized solar cells. With increasing chain length, we observed higher currents and open-circuit voltages up to a limiting chain length. We attribute this improvement to the expected larger distance between TiO2 and the hole conductor, which seems to suppress recombination effectively.

[1]  P. Hammond,et al.  Solid‐State Photovoltaic Thin Films using TiO2, Organic Dyes, and Layer‐by‐Layer Polyelectrolyte Nanocomposites , 2003 .

[2]  Arie Zaban,et al.  Dye Sensitization of Nanocrystalline Tin Oxide by Perylene Derivatives , 1997 .

[3]  Michael Grätzel,et al.  Improvement of the photovoltaic performance of solid-state dye-sensitized device by silver complexation of the sensitizer cis-bis(4,4 ' -dicarboxy-2,2 ' bipyridine)-bis(isothiocyanato) ruthenium(II) , 2002 .

[4]  Martin A. Green,et al.  Photovoltaics: technology overview , 2000 .

[5]  Hironori Arakawa,et al.  Efficient sensitization of nanocrystalline TiO2 films with cyanine and merocyanine organic dyes , 2003 .

[6]  Peng Wang,et al.  High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyte. , 2002, Chemical communications.

[7]  Michael Grätzel,et al.  Efficiency improvement in solid-state-dye-sensitized photovoltaics with an amphiphilic Ruthenium-dye , 2005 .

[8]  Ghassan E. Jabbour,et al.  Organic-Based Photovoltaics: Toward Low-Cost Power Generation , 2005 .

[9]  Marco Piccirelli,et al.  High efficiency solid-state photovoltaic device due to inhibition of interface charge recombination , 2001 .

[10]  Ladislav Kavan,et al.  Highly efficient semiconducting TiO2 photoelectrodes prepared by aerosol pyrolysis , 1995 .

[11]  S. Uchida,et al.  Highly-efficient metal-free organic dyes for dye-sensitized solar cells. , 2003, Chemical communications.

[12]  Josef Salbeck,et al.  Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies , 1998, Nature.

[13]  Peng Wang,et al.  A stable quasi-solid-state dye-sensitized solar cell with an amphiphilic ruthenium sensitizer and polymer gel electrolyte , 2003, Nature materials.

[14]  Emilio Palomares,et al.  Charge separation versus recombination in dye-sensitized nanocrystalline solar cells: the minimization of kinetic redundancy. , 2005, Journal of the American Chemical Society.

[15]  Claudia Barolo,et al.  Stepwise Assembly of Amphiphilic Ruthenium Sensitizers and their Applications in Dye Sensitized Solar Cell , 2004 .

[16]  Hidetoshi Miura,et al.  Organic Dye for Highly Efficient Solid‐State Dye‐Sensitized Solar Cells , 2005 .

[17]  H. Arakawa,et al.  A coumarin-derivative dye sensitized nanocrystalline TiO2 solar cell having a high solar-energy conversion efficiency up to 5.6% , 2001 .

[18]  R. G. Snyder.  Vibrational Study of the Chain Conformation of the Liquid n‐Paraffins and Molten Polyethylene , 1967 .

[19]  Peng Wang,et al.  Molecular‐Scale Interface Engineering of TiO2 Nanocrystals: Improve the Efficiency and Stability of Dye‐Sensitized Solar Cells , 2003 .

[20]  U. Bach,et al.  Charge Separation in Solid-State Dye-Sensitized Heterojunction Solar Cells , 1999 .

[21]  Selçuk Bilgen,et al.  Renewable Energy for a Clean and Sustainable Future , 2004 .

[22]  Michael Gratzel,et al.  Supramolecular control of charge-transfer dynamics on dye-sensitized nanocrystalline TiO2 films. , 2004, Chemistry.