Filaments Production and Fused Deposition Modelling of ABS/Carbon Nanotubes Composites

Composite acrylonitrile–butadiene–styrene (ABS)/carbon nanotubes (CNT) filaments at 1, 2, 4, 6 and 8 wt %, suitable for fused deposition modelling (FDM) were obtained by using a completely solvent-free process based on direct melt compounding and extrusion. The optimal CNT content in the filaments for FDM was found to be 6 wt %; for this composite, a detailed investigation of the thermal, mechanical and electrical properties was performed. Presence of CNT in ABS filaments and 3D-printed parts resulted in a significant enhancement of the tensile modulus and strength, accompanied by a reduction of the elongation at break. As documented by dynamic mechanical thermal analysis, the stiffening effect of CNTs in ABS is particularly pronounced at high temperatures. Besides, the presence of CNT in 3D-printed parts accounts for better creep and thermal dimensional stabilities of 3D-printed parts, accompanied by a reduction of the coefficient of thermal expansion). 3D-printed nanocomposite samples with 6 wt % of CNT exhibited a good electrical conductivity, even if lower than pristine composite filaments.

[1]  P. Pötschke,et al.  Influence of small scale melt mixing conditions on electrical resistivity of carbon nanotube-polyamide composites , 2009 .

[2]  D. Therriault,et al.  3D printing of a multifunctional nanocomposite helical liquid sensor. , 2015, Nanoscale.

[3]  Brett Paull,et al.  Recent developments in 3D printable composite materials , 2016 .

[4]  W. Findley,et al.  26-Year creep and recovery of poly(vinyl chloride) and polyethylene , 1987 .

[5]  Feng Fu,et al.  Resistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites , 2017 .

[6]  Sushanta Ghoshal,et al.  Polymer/Carbon Nanotubes (CNT) Nanocomposites Processing Using Additive Manufacturing (Three-Dimensional Printing) Technique: An Overview , 2017 .

[7]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[8]  A. Pegoretti,et al.  Electrically conductive nanocomposites for fused deposition modelling , 2017 .

[9]  Martin Lévesque,et al.  Direct-write fabrication of freestanding nanocomposite strain sensors , 2012, Nanotechnology.

[10]  Jinbao Guo,et al.  Fabrication of highly conductive graphene flexible circuits by 3D printing , 2016 .

[11]  Lei Song,et al.  Enhanced mechanical, thermal and flame retardant properties by combining graphene nanosheets and metal hydroxide nanorods for Acrylonitrile–Butadiene–Styrene copolymer composite , 2014 .

[12]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[13]  Marinella Levi,et al.  Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling , 2015 .

[14]  Wei Jiang,et al.  3D Printable Graphene Composite , 2015, Scientific Reports.

[15]  H. Friedrich,et al.  3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling , 2017 .

[16]  L. Fambri,et al.  Fused deposition modelling with ABS–graphene nanocomposites , 2016 .

[17]  P. Pötschke,et al.  Influence of feeding conditions in twin-screw extrusion of PP/MWCNT composites on electrical and mechanical properties , 2011 .

[18]  Mohammed H Al-Saleh,et al.  Experimental and theoretical analysis of the mechanical and thermal properties of carbon nanotube/acrylonitrile–styrene–butadiene nanocomposites , 2016 .

[19]  Lijun Wang,et al.  The relationship between microstructure and mechanical properties of carbon nanotubes/polylactic acid nanocomposites prepared by twin-screw extrusion , 2016 .

[20]  Thomas A. Campbell,et al.  3D printing of multifunctional nanocomposites , 2013 .

[21]  C. Wu,et al.  Interface design of environmentally friendly carbon nanotube-filled polyester composites: Fabrication, characterisation, functionality and application , 2017 .

[22]  C. Migliaresi,et al.  Characterization of modulus and glass transition phenomena in poly(L‐lactide)/hydroxyapatite composites , 2003 .

[23]  Feng Zhang,et al.  3D Printing of Graphene Aerogels. , 2016, Small.

[24]  Graham Williams,et al.  Non-symmetrical dielectric relaxation behaviour arising from a simple empirical decay function , 1970 .

[25]  U. Sundararaj,et al.  Three-dimensional printing of highly conductive polymer nanocomposites for EMI shielding applications , 2017 .

[26]  K. Kar,et al.  Mechanical and thermal behaviours of graphite flake-reinforced acrylonitrile–butadiene–styrene composites and their correlation with entanglement density, adhesion, reinforcement and C factor , 2016 .

[27]  J. Jyoti,et al.  Dynamic mechanical properties of multiwall carbon nanotube reinforced ABS composites and their correlation with entanglement density, adhesion, reinforcement and C factor , 2016 .

[28]  K. Lozano,et al.  Thermal analysis of an acrylonitrile–butadiene–styrene/SWNT composite , 2004 .

[29]  David A. Hutchins,et al.  A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors , 2012, PloS one.

[30]  J. Jyoti,et al.  Superior mechanical and electrical properties of multiwall carbon nanotube reinforced acrylonitrile butadiene styrene high performance composites , 2015 .

[31]  Zachariah Oommen,et al.  Dynamic mechanical analysis of banana fiber reinforced polyester composites , 2003 .