Developments on electrochemical discharge machining: A review of experimental investigations on tool electrode process parameters

The electrochemical discharge machining is a combination of electrochemical machining and electrical discharge machining. The machining is achieved by chemical etching effect and melting of workpiece material due to electrical discharges. This process is used for a variety of nonconductive materials (glass, quartz, ceramic, Pyrex and so on) for the purpose of micromachining and specially for micro electro mechanical system applications. This article presents a comprehensive review of recent developments on tool electrode process parameters, which have resulted in enhanced efficiency and accuracy of the machining process. The tool electrode process parameters are shape, size, roughness, insulation and motion of tool and so on. These process parameters affect the process performance in terms of material removal rate, surface quality and dimensional accuracy of micromachined products. For example, spherical tool geometry provides five times higher material removal rate as compared to cylindrical tool geometry. The impact of electrochemical discharge machining process parameters associated with tool electrode is also discussed. A summary of review and proposed research directions is presented in this article.

[1]  J. A. McGeough,et al.  Theoretical and Experimental Investigation of the Relative Effects of Spark Erosion and Electrochemical Dissolution in Electrochemical ARC Machining , 1983 .

[2]  Takahisa Masuzawa,et al.  Wire Electro-Discharge Grinding for Micro-Machining , 1985 .

[3]  B. Bhattacharyya,et al.  Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials , 1999 .

[4]  Yoon Keun Kwak,et al.  Self-aligned microtool and electrochemical discharge machining (ECDM) for ceramic materials , 2001, Optical Engineering for Sensing and Nanotechnology.

[5]  L. A. Hof,et al.  The gas film in Spark Assisted Chemical Engraving (SACE) - A key element for micro-machining applications , 2006 .

[6]  B. Yan,et al.  The tool geometrical shape and pulse-off time of pulse voltage effects in a Pyrex glass electrochemical discharge microdrilling process , 2007 .

[7]  P. Venkateswara Rao,et al.  The drilling of Al2O3 using a pulsed DC supply with a rotary abrasive electrode by the electrochemical discharge process , 2008 .

[8]  Sang Jo Lee,et al.  Modeling gas film formation in electrochemical discharge machining processes using a side-insulated electrode , 2008 .

[9]  B. Min,et al.  Wire electrochemical discharge machining of glass using a surface roughened tool , 2009 .

[10]  Sang Jo Lee,et al.  Geometric improvement of electrochemical discharge micro-drilling using an ultrasonic-vibrated electrolyte , 2009 .

[11]  Chong Nam Chu,et al.  Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining , 2009 .

[12]  Biing-Hwa Yan,et al.  Magnetic field-assisted electrochemical discharge machining , 2010 .

[13]  Cheng-Kuang Yang,et al.  Effect of surface roughness of tool electrode materials in ECDM performance , 2010 .

[14]  Chenjun Wei,et al.  Electrochemical discharge machining using micro-drilling tools , 2010 .

[15]  Biing-Hwa Yan,et al.  Study of gas film quality in electrochemical discharge machining , 2010 .

[16]  Biing-Hwa Yan,et al.  Enhancement of ECDM efficiency and accuracy by spherical tool electrode , 2011 .

[17]  L. Slătineanu,et al.  Drilling of Difficult-to-Cut Steel by Electrochemical Discharge Machining , 2011 .

[18]  Y. Liu,et al.  Micro-Hole Machined by Electrochemical Discharge Machining (ECDM) with High Speed Rotating Cathode , 2011 .

[19]  Sang Jo Lee,et al.  Micro-electrochemical discharge cutting of glass using a surface-textured tool , 2011 .

[20]  R. Wüthrich,et al.  Tool wear and tool thermal expansion during micro-machining by spark assisted chemical engraving , 2012 .

[21]  Apurbba Kumar Sharma,et al.  Micromachining with ECDM: Research Potentials and Experimental Investigations , 2012 .

[22]  Hongseok Choi,et al.  Transactions of the North American Manufacturing Research Institution of SME , 2014 .

[23]  A. Stwora,et al.  Electrochemical-discharge machining of composite materials , 2015 .