IMPLEMENTATION OF MULTIPLE-CHANNEL CAPACITIVE ECG MEASUREMENT BASED ON CONDUCTIVE FABRIC

Capacitive electrocardiogram (cECG) measurement is an attractive approach for long-term health monitoring. However, there is little literature available for the implementation of multiple-channel cECG system in standard limb leads. The circuit diagram for such a system is also rarely available in literature. This paper presents a multiple-channel limb-lead cECG system that utilized conductive fabrics as the capacitive sensors. The design criteria and the corresponding circuit diagram are described in detail. The proposed system also incorporates the capacitive driven-body (CDB) circuit to reduce the common-mode power-line interference (PLI). The presented system is verified to be stable by theoretic analysis and long-term experiments. The signals acquired by the presented system are competitive with those by commercially available electrocardiogram (ECG) machines. The feasible size and distance to the subject for the sensor made by conductive fabric have also been evaluated by a series of tests. From the test results, the sensor is suggested to be of greater than 60 cm2 in area and not more than 3 mm in distance for cECG measurement.

[1]  Nitish V. Thakor,et al.  Ground-Free ECG Recording with Two Electrodes , 1980, IEEE Transactions on Biomedical Engineering.

[2]  C J Harland,et al.  A compact electric potential sensor array for the acquisition and reconstruction of the 7-lead electrocardiogram without electrical charge contact with the skin , 2005, Physiological measurement.

[3]  John G. Webster,et al.  Driven-right-leg circuit design , 1983, IEEE Transactions on Biomedical Engineering.

[4]  Tsuyoshi Kato,et al.  Capacitive Sensing of Electrocardiographic Potential Through Cloth From the Dorsal Surface of the Body in a Supine Position: A Preliminary Study , 2007, IEEE Transactions on Biomedical Engineering.

[5]  A. Gruetzmann,et al.  Novel dry electrodes for ECG monitoring , 2007, Physiological measurement.

[6]  T. D. Clark,et al.  Non-contact VLSI imaging using a scanning electric potential microscope , 1998 .

[7]  L. Kirkup,et al.  A direct comparison of wet, dry and insulating bioelectric recording electrodes. , 2000, Physiological measurement.

[8]  T. D. Clark,et al.  An ultra-low-noise electrical-potential probe for human-body scanning , 2000 .

[9]  P. C. Richardson,et al.  Capacitive electrocardiographic and bioelectric electrodes. , 1969, IEEE transactions on bio-medical engineering.

[10]  D. E. Wood,et al.  Comparative analysis of power-line interference between two- or three-electrode biopotential amplifiers , 2006, Medical and Biological Engineering and Computing.

[11]  S. R. P. Silva,et al.  First human trials of a dry electrophysiology sensor using a carbon nanotube array interface , 2007, physics/0701159.

[12]  Thomas S. Huang,et al.  Human-Computer Interaction , 2011, Visual Analysis of Humans.

[13]  M Oehler,et al.  A multichannel portable ECG system with capacitive sensors , 2008, Physiological measurement.

[14]  J G Webster,et al.  60-HZ interference in electrocardiography. , 1973, IEEE transactions on bio-medical engineering.

[15]  Tzyy-Ping Jung,et al.  Dry-Contact and Noncontact Biopotential Electrodes: Methodological Review , 2010, IEEE Reviews in Biomedical Engineering.

[16]  M Steffen,et al.  Mobile Noncontact Monitoring of Heart and Lung Activity , 2007, IEEE Transactions on Biomedical Circuits and Systems.

[17]  Yong Gyu Lim,et al.  ECG Recording on a Bed During Sleep Without Direct Skin-Contact , 2007, IEEE Transactions on Biomedical Engineering.

[18]  John G. Webster,et al.  Medical Instrumentation: Application and Design , 1997 .

[19]  Sun Kook Yoo,et al.  Wearable ECG Monitoring System Using Conductive Fabrics and Active Electrodes , 2009, HCI.

[20]  Michael M Laks,et al.  Comfortable textile-based electrocardiogram systems for very long-term monitoring. , 2008, Cardiology journal.

[21]  K. Park,et al.  Flexible polymeric dry electrodes for the long-term monitoring of ECG , 2008 .

[22]  Yong Gyu Lim,et al.  ECG measurement on a chair without conductive contact , 2006, IEEE Transactions on Biomedical Engineering.