X-band PIN Diode Limiter with Low Spike Leakage Performances using Re-entrant Coaxial Cavity

This paper describes a design methodology and the experimental results of an X-band two-stage PIN diode limiter, whose leakage output powers have been successfully suppressed by optimizing the size of multi section re-entrant cavities. The optimized re-entrant cavity provides an appropriate impedance for the PIN diodes in order to achieve moderate limiting performances. The fabricated limiter exhibits a low spike leakage of 21.6 dBm and flat leakage of 20.7 dBm with a high isolation of more than 48 dB at 12.5 kW input power.

[1]  F. M. Waltz,et al.  On the Synthesis of Dual-Resonant Coaxial Cavities , 1964 .

[2]  S. Hori,et al.  High-Power MIC Diode Limiters for S- and X-Band RADARs , 1979, 1979 IEEE MTT-S International Microwave Symposium Digest.

[3]  J.M. Carroll Performance comparison of single and dual stage MMIC limiters , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[4]  M.J. Quinn,et al.  Time domain modeling of PIN control and limiter diodes , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[5]  R. Kaul,et al.  Spike leakage of thin Si PIN limiters , 1994 .

[6]  R. J. Tan,et al.  Transient response of PIN limiter diodes , 1989, IEEE MTT-S International Microwave Symposium Digest.

[7]  P.A. Rolland,et al.  Time-Domain Modeling of the Transient Response of a Back-To-Back Silicon Pin-Diode Passive Power-Limiter Circuit , 1991, 1991 21st European Microwave Conference.