Focal length and radius of curvature measurement using coherent gradient sensing and Fourier fringe analysis

Abstract A procedure for the measurement of focal length and radius of curvature of a lens using coherent gradient sensing system and Fourier transform fringe analysis technique has been demonstrated. Light from the laser illuminates the specimen and the wavefront emerging from the specimen is tested using coherent gradient sensing interferometer. The fringe pattern corresponding to the test wavefront is stored, and analyzed using Fourier fringe analysis technique. The slope of the wavefront in the direction of shear has been evaluated. It provides the information regarding exact location of points corresponding to the focus/center of curvature of the lens. High accuracy and precision has been achieved.

[1]  A. Rosakis,et al.  Measurement of full-field curvature and geometrical instability of thin film-substrate systems through CGS interferometry , 2003 .

[2]  Ares J. Rosakis,et al.  Optical mapping of crack tip deformations using the methods of transmission and reflection coherent gradient sensing: a study of crack tip K-dominance , 1991, International Journal of Fracture.

[3]  Christophe Gorecki,et al.  Interferogram analysis using a Fourier transform method for automatic 3D surface measurement , 1992 .

[4]  Daesuk Kim,et al.  Radius of curvature measurement of spherical smooth surfaces by multiple-beam interferometry in reflection , 2010 .

[5]  F. Lei,et al.  Measuring the focal length of optical systems by grating shearing interferometry. , 1994, Applied optics.

[6]  Hareesh V. Tippur,et al.  Measurement of contact stresses using real-time shearing interferometry , 1999 .

[7]  Y. Xiang.  Focus retrocollimated interferometry for focal-length measurements. , 2002, Applied optics.

[8]  Ares J. Rosakis,et al.  A coherent gradient sensor for crack tip deformation measurements: analysis and experimental results , 1991 .

[9]  Jitendra Dhanotia,et al.  Collimation testing using coherent gradient sensing , 2011 .

[10]  Chandra Shakher,et al.  Measurement of focal length with phase-shifting Talbot interferometry. , 2005, Applied optics.

[11]  Qing-Hua Huang,et al.  An optical coherence tomography (OCT)-based air jet indentation system for measuring the mechanical properties of soft tissues , 2009, Measurement science & technology.

[12]  J. Lawall.  High resolution determination of radii of curvature using Fabry–Perot interferometry , 2009 .

[13]  S. Prakash,et al.  A low cost technique for automated measurement of focal length using Lau effect combined with Moiré readout , 2006 .

[14]  D. Malacara.  Optical Shop Testing , 1978 .

[15]  P. Ferraro,et al.  Reflective grating interferometer for measuring the focal length of a lens by digital moiré effect , 1996 .

[16]  A K Aggarwal,et al.  Measurement of the focal length of a collimating lens using the Talbot effect and the moiré technique. , 1991, Applied optics.

[17]  F. Chiang,et al.  Laser speckle interferometry for plate bending problems. , 1976, Applied optics.

[18]  H. Tippur.  Simultaneous and real-time measurement of slope and curvature fringes in thin structures using shearing interferometery , 2004 .

[19]  C. Shakher,et al.  Measurement of temperature of an axisymmetric flame using shearing interferometry and Fourier fringe analysis technique , 2004 .

[20]  Madhuri Thakur,et al.  Measurement of focal length of lens using phase shifting Lau phase interferometry , 2005 .

[21]  E Keren,et al.  Universal method for determining the focal length of optical systems by moire deflectometry. , 1988, Applied optics.

[22]  Po Sheun Chung,et al.  Simple focal-length measurement technique with a circular Dammann grating. , 2007, Applied optics.

[23]  K. Murata,et al.  Talbot interferometry for measuring the focal length of a lens. , 1985, Applied optics.

[24]  T H Barnes,et al.  Focal-length measurement by multiple-beam shearing interferometry. , 1999, Applied optics.

[25]  J. Horner.  Collimation invariant technique for measuring the focal length of a lens. , 1989, Applied optics.

[26]  M. Takeda,et al.  Fourier-transform method of fringe-pattern analysis for computer-based topography and interferometry , 1982 .

[27]  Chandra Shakher,et al.  Distance measurement with extended range using lateral shearing interferometry and Fourier transform fringe analysis , 2005 .

[28]  M. P. Kothiyal,et al.  Direct determination of focal length by using Talbot interferometry. , 1992, Applied optics.