A CFD–DEM study of bubble dynamics in fluidized bed using flood fill method

Abstract Bubble dynamics are very important in the design of fluidized beds because they govern hydrodynamics and efficiency of the operation for which the bed is used. A numerical simulation work of two-dimensional gas–solid fluidized bed based on discrete element method (DEM) was carried out in this paper. In order to study bubble statistical properties of a large number of bubbles, the flood fill concept was introduced in this paper to search the bubbles, which used the simulated voidage data directly. Various bubble properties i.e. bubble size and velocity distributions, bubble shape factor and aspect ratio, can be obtained simultaneously using this analysis method. The calculated results of bubble properties are in sound agreement with previous empirical correlations and experimental data in literature.

[1]  Bubble dynamics in a two-dimensional gas–solid fluidized bed , 2007 .

[2]  Jianren Fan,et al.  Discrete element simulation of the hydrodynamics in a 3D spouted bed: Influence of tube configuration , 2013 .

[3]  Y. Tsuji,et al.  Cluster patterns in circulating fluidized beds predicted by numerical simulation (discrete particle model versus two-fluid model) , 1998 .

[4]  G. R. Caicedo,et al.  A study on the behaviour of bubbles of a 2D gas–solid fluidized bed using digital image analysis , 2003 .

[5]  Wiwut Tanthapanichakoon,et al.  Discrete particle simulation of solids motion in a gas–solid fluidized bed , 2003 .

[6]  Teklay Weldeabzgi Asegehegn,et al.  Numerical simulation and experimental validation of bubble behavior in 2D gas–solid fluidized beds with immersed horizontal tubes , 2011 .

[7]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[8]  S. Ergun.  Fluid flow through packed columns , 1952 .

[9]  Kurt Liffman,et al.  Study of mixing in gas-fluidized beds using a DEM model , 2001 .

[10]  S. Pannala,et al.  Open-source MFIX-DEM software for gas-solids flows: Part I – verification studies , 2012 .

[11]  Jai Kant Pandit,et al.  Study of Geldart's Group A behaviour using the discrete element method simulation , 2005 .

[12]  Yang Wang,et al.  Simulation and experimental studies on fluidization properties in a pressurized jetting fluidized bed , 2008 .

[13]  Aibing Yu,et al.  Numerical simulation of the gas-solid flow in a fluidized bed by combining discrete particle method with computational fluid dynamics , 1997 .

[14]  Runyu Yang,et al.  Discrete particle simulation of particulate systems: A review of major applications and findings , 2008 .

[15]  Jam Hans Kuipers,et al.  Critical comparison of hydrodynamic models for gas-solid fluidized beds - Part II: freely bubbling gas-solid fluidized beds , 2005 .

[16]  D. Grecov,et al.  DEM investigations of fluidized beds in the presence of liquid coating , 2011 .

[17]  Lounes Tadrist,et al.  Numerical study of cluster formation in a gas–particle circulating fluidized bed , 2000 .

[18]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[19]  D. L. Pyle,et al.  The rising velocity of bubbles in two-dimensional fluidised beds , 1967 .

[20]  Sunun Limtrakul,et al.  DEM modeling and simulation of a catalytic gas–solid fluidized bed reactor: a spouted bed as a case study , 2004 .

[21]  Filip Johnsson,et al.  Expansion of a freely bubbling fluidized bed , 1991 .

[22]  N. Mostoufi,et al.  A new method for validation of a CFD–DEM model of gas–solid fluidized bed , 2012 .

[23]  Lucio Rizzuti,et al.  Analysis of the bubbling behaviour of 2D gas solid fluidized beds: Part II. Comparison between experiments and numerical simulations via Digital Image Analysis Technique , 2009 .

[24]  C. Wen.  Mechanics of Fluidization , 1966 .

[25]  Yurong He,et al.  Discrete particle modeling of granular temperature distribution in a bubbling fluidized bed , 2012 .

[26]  M. Adams,et al.  Discrete particle-continuum fluid modelling of gas–solid fluidised beds , 2002 .

[27]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[28]  Ulrich Renz,et al.  Verification of Eulerian simulation of spontaneous bubble formation in a fluidized bed , 1998 .

[29]  F. Johnsson,et al.  Digital image analysis of hydrodynamics two-dimensional bubbling fluidized beds , 2004 .

[30]  Ian Hulme,et al.  Determination of bubble diameter and axial velocity for a polyethylene fluidized bed using X-ray fluoroscopy , 2004 .

[31]  G. Micale,et al.  On the bubbling dynamics of binary mixtures of powders in 2D gas-solid fluidized beds , 2012 .

[32]  A. Kantzas,et al.  CFD Modeling and Validation of Bubble Properties for a Bubbling Fluidized Bed , 2005 .

[33]  John R. Grace,et al.  Study of wall boundary condition in numerical simulations of bubbling fluidized beds , 2010 .

[34]  Masayuki Horio,et al.  DEM simulation of fluidized beds for gas-phase olefin polymerization , 1999 .

[35]  Teklay Weldeabzgi Asegehegn,et al.  Investigation of bubble behavior in fluidized beds with and without immersed horizontal tubes using a digital image analysis technique , 2011 .

[36]  van den Cm Bleek,et al.  Eulerian simulations of bubbling behaviour in gas-solid fluidised beds , 1998 .

[37]  Jam Hans Kuipers,et al.  Bubble formation at a single orifice in gas-fluidised beds , 1996 .

[38]  Masayuki Horio,et al.  Behavior of particles and bubbles around immersed tubes in a fluidized bed at high temperature and pressure : a DEM simulation , 2001 .

[39]  G. Micale,et al.  Analysis of the bubbling behaviour of 2D gas solid fluidized beds: Part I. Digital image analysis technique , 2008 .