Cost-Effective Energy Refurbishment of Health Care Facilities in Heating Dominated Climates of Italian Backcountry. The Case Study of the Hospital Veneziale of Isernia

Maximizing energy efficiency within hospitals and healthcare facilities is a major challenge for sustainable development and energy saving objectives. In this study, the case study of the public hospital of Isernia (Italian backcountry city) is proposed, being typical of the hospital building stock developed in reinforced concrete all around Italy in the last 40 years. Starting from deep on-site investigations, based on direct surveys and documents, a transient energy model has been developed and calibrated, in order to reproduce the present scenario. This, in a next phase, has been modified for proposing a multi-target optimization of energy performances, by taking into consideration all main uses (heating, cooling, ventilation, lighting, domestic hot water), by refurbishing the building envelope, active energy systems and providing energy conversion from renewables. The whole energy retrofit, formulated on the basis of a multi-stage optimization problem, resulted technically efficient and economically feasible. Moreover, the peculiarities of the case study and of the method make that investigation repeatable with reference to both studying approach and outcomes.

[1]  Gerardo Maria Mauro,et al.  Multi-stage and multi-objective optimization for energy retrofitting a developed hospital reference building: A new approach to assess cost-optimality , 2016 .

[2]  Enrico Fabrizio,et al.  Technical-economic feasibility of CHP systems in large hospitals through the Energy Hub method: The case of Cagliari AOB , 2017 .

[3]  Ahmed A. Hanafy,et al.  Retrofitting of existing buildings to achieve better energy-efficiency in commercial building case study: Hospital in Egypt , 2016 .

[4]  Alfonso Capozzoli,et al.  A novel methodology for energy performance benchmarking of buildings by means of Linear Mixed Effect Model: The case of space and DHW heating of out-patient Healthcare Centres , 2016 .

[5]  Francesco Calise,et al.  Dynamic energy performance analysis: Case study for energy efficiency retrofits of hospital buildings , 2014 .

[6]  Ahmet Teke,et al.  Assessing the energy efficiency improvement potentials of HVAC systems considering economic and environmental aspects at the hospitals , 2014 .

[7]  Valentina Colla,et al.  Multi-objective optimization applied to retrofit analysis: A case study for the iron and steel industry , 2015 .

[8]  D. Fang,et al.  Building energy efficiency for public hospitals and healthcare facilities in China: Barriers and drivers , 2016 .

[9]  Masayuki Ichinose,et al.  Clarifying thermal comfort of healthcare occupants in tropical region: A case of indoor environment in Thai hospitals , 2017 .

[10]  Martin Kaltschmitt,et al.  Electrical energy consumption and utilization time analysis of hospital departments and large scale medical equipment , 2016 .

[11]  Alessandro Carbonari,et al.  Managing energy retrofit of acute hospitals and community clinics through EPC contracting: the MARTE project. , 2015 .

[12]  Philippe Rigo,et al.  A review on simulation-based optimization methods applied to building performance analysis , 2014 .